lkml.org 
[lkml]   [2023]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/6] kbuild: remove sed commands after rustc rules
From

Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>

> rustc may put comments in dep-info, so sed is used to drop them before
> passing it to fixdep.
>
> Now that fixdep can remove comments, Makefiles do not need to run sed.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> rust/Makefile | 6 ++----
> scripts/Makefile.build | 18 ++++--------------
> scripts/Makefile.host | 3 +--
> 3 files changed, 7 insertions(+), 20 deletions(-)
>
> diff --git a/rust/Makefile b/rust/Makefile
> index 0e2a32f4b3e9..c8941fec6955 100644
> --- a/rust/Makefile
> +++ b/rust/Makefile
> @@ -333,8 +333,7 @@ quiet_cmd_rustc_procmacro = $(RUSTC_OR_CLIPPY_QUIET) P $@
> $(RUSTC_OR_CLIPPY) $(rust_common_flags) \
> --emit=dep-info=$(depfile) --emit=link=$@ --extern proc_macro \
> --crate-type proc-macro \
> - --crate-name $(patsubst lib%.so,%,$(notdir $@)) $<; \
> - sed -i '/^\#/d' $(depfile)
> + --crate-name $(patsubst lib%.so,%,$(notdir $@)) $<
>
> # Procedural macros can only be used with the `rustc` that compiled it.
> # Therefore, to get `libmacros.so` automatically recompiled when the compiler
> @@ -349,8 +348,7 @@ quiet_cmd_rustc_library = $(if $(skip_clippy),RUSTC,$(RUSTC_OR_CLIPPY_QUIET)) L
> $(filter-out $(skip_flags),$(rust_flags) $(rustc_target_flags)) \
> --emit=dep-info=$(depfile) --emit=obj=$@ --emit=metadata=$(dir $@)$(patsubst %.o,lib%.rmeta,$(notdir $@)) \
> --crate-type rlib -L$(objtree)/$(obj) \
> - --crate-name $(patsubst %.o,%,$(notdir $@)) $<; \
> - sed -i '/^\#/d' $(depfile) \
> + --crate-name $(patsubst %.o,%,$(notdir $@)) $< \
> $(if $(rustc_objcopy),;$(OBJCOPY) $(rustc_objcopy) $@)
>
> rust-analyzer:
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 40de20246e50..76323201232a 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -289,9 +289,6 @@ rust_common_cmd = \
> --crate-name $(basename $(notdir $@)) \
> --emit=dep-info=$(depfile)
>
> -rust_handle_depfile = \
> - sed -i '/^\#/d' $(depfile)
> -
> # `--emit=obj`, `--emit=asm` and `--emit=llvm-ir` imply a single codegen unit
> # will be used. We explicitly request `-Ccodegen-units=1` in any case, and
> # the compiler shows a warning if it is not 1. However, if we ever stop
> @@ -301,9 +298,7 @@ rust_handle_depfile = \
> # would not match each other.
>
> quiet_cmd_rustc_o_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
> - cmd_rustc_o_rs = \
> - $(rust_common_cmd) --emit=obj=$@ $<; \
> - $(rust_handle_depfile)
> + cmd_rustc_o_rs = $(rust_common_cmd) --emit=obj=$@ $<
>
> $(obj)/%.o: $(src)/%.rs FORCE
> $(call if_changed_dep,rustc_o_rs)
> @@ -311,24 +306,19 @@ $(obj)/%.o: $(src)/%.rs FORCE
> quiet_cmd_rustc_rsi_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
> cmd_rustc_rsi_rs = \
> $(rust_common_cmd) -Zunpretty=expanded $< >$@; \
> - command -v $(RUSTFMT) >/dev/null && $(RUSTFMT) $@; \
> - $(rust_handle_depfile)
> + command -v $(RUSTFMT) >/dev/null && $(RUSTFMT) $@
>
> $(obj)/%.rsi: $(src)/%.rs FORCE
> $(call if_changed_dep,rustc_rsi_rs)
>
> quiet_cmd_rustc_s_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
> - cmd_rustc_s_rs = \
> - $(rust_common_cmd) --emit=asm=$@ $<; \
> - $(rust_handle_depfile)
> + cmd_rustc_s_rs = $(rust_common_cmd) --emit=asm=$@ $<
>
> $(obj)/%.s: $(src)/%.rs FORCE
> $(call if_changed_dep,rustc_s_rs)
>
> quiet_cmd_rustc_ll_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
> - cmd_rustc_ll_rs = \
> - $(rust_common_cmd) --emit=llvm-ir=$@ $<; \
> - $(rust_handle_depfile)
> + cmd_rustc_ll_rs = $(rust_common_cmd) --emit=llvm-ir=$@ $<
>
> $(obj)/%.ll: $(src)/%.rs FORCE
> $(call if_changed_dep,rustc_ll_rs)
> diff --git a/scripts/Makefile.host b/scripts/Makefile.host
> index 4434cdbf7b8e..bc782655d09e 100644
> --- a/scripts/Makefile.host
> +++ b/scripts/Makefile.host
> @@ -148,8 +148,7 @@ $(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
> # host-rust -> Executable
> quiet_cmd_host-rust = HOSTRUSTC $@
> cmd_host-rust = \
> - $(HOSTRUSTC) $(hostrust_flags) --emit=link=$@ $<; \
> - sed -i '/^\#/d' $(depfile)
> + $(HOSTRUSTC) $(hostrust_flags) --emit=link=$@ $<
> $(host-rust): $(obj)/%: $(src)/%.rs FORCE
> $(call if_changed_dep,host-rust)
>
> --
> 2.34.1

\
 
 \ /
  Last update: 2023-03-26 23:29    [W:0.102 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site