On 02.01.23 15:06, Jacopo Mondi wrote:
> Hi Robert
>
> On Sun, Dec 25, 2022 at 04:42:34PM +0100, Robert Mader wrote:
>> Analogous to e.g. the imx219. This enables propagating
>> V4L2_CID_CAMERA_SENSOR_ROTATION values so that libcamera
>> can detect the correct rotation from the device tree
>> and propagate it further to e.g. Pipewire.
>>
>> Signed-off-by: Robert Mader <robert.mader@collabora.com>
>> ---
>>   drivers/media/i2c/imx258.c | 13 ++++++++++++-
>>   1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
>> index eab5fc1ee2f7..85819043d1e3 100644
>> --- a/drivers/media/i2c/imx258.c
>> +++ b/drivers/media/i2c/imx258.c
>> @@ -9,6 +9,7 @@
>>   #include <linux/pm_runtime.h>
>>   #include <media/v4l2-ctrls.h>
>>   #include <media/v4l2-device.h>
>> +#include <media/v4l2-fwnode.h>
>>   #include <asm/unaligned.h>
>>
>>   #define IMX258_REG_VALUE_08BIT		1
>> @@ -1149,6 +1150,7 @@ static int imx258_init_controls(struct imx258 *imx258)
>>   {
>>   	struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
>>   	struct v4l2_ctrl_handler *ctrl_hdlr;
>> +	struct v4l2_fwnode_device_properties props;
> Might be nicer to move this one line up

  Can you say what's your reasoning? I personally slightly prefer 
alphabetical order, but no strong opinion :)

>>   	s64 vblank_def;
>>   	s64 vblank_min;
>>   	s64 pixel_rate_min;
>> @@ -1156,7 +1158,7 @@ static int imx258_init_controls(struct imx258 *imx258)
>>   	int ret;
>>
>>   	ctrl_hdlr = &imx258->ctrl_handler;
>> -	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
>> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
> I count 9 controls being registered before this patch, not 8. Do I
> count them right ?
>
> If that's case, as v4l2_ctrl_new_fwnode_properties()
> can register up to two controls (V4L2_CID_ROTATION and
> V4L2_CID_ORIENTATION) I would pre-reserve 11 controls not 10 to avoid
> relocations.

Indeed, looks like bumping this was forgotten in 
c6f9d67e2ac625e331f6a7f5715d2f809ff0a922

>>   	if (ret)
>>   		return ret;
>>
>> @@ -1232,6 +1234,15 @@ static int imx258_init_controls(struct imx258 *imx258)
>>   		goto error;
>>   	}
>>
>> +	ret = v4l2_fwnode_device_parse(&client->dev, &props);
>> +	if (ret)
>> +		goto error;
>> +
>> +	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx258_ctrl_ops,
>> +					      &props);
>> +	if (ret)
>> +		goto error;
>> +
> The rest looks good to me!
>
> Thanks
>     j
Thanks!

-- 
Robert Mader
Consultant Software Developer

Collabora Ltd.
Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
Registered in England & Wales, no. 5513718