lkml.org 
[lkml]   [2023]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/6] drm/rockchip: vop2: add support for the rgb output block
Date
Hi all,

This series adds support for the RGB output block that can be found in the
Rockchip Video Output Processor (VOP) 2. Version 2 of this series
incorporates the feedback by Dan Carpenter and Sascha Hauer. Version 3
fixes a dumb mistake pointed out by Sascha :-) Thanks for your comments!

Patches 1-4 clean up the code and make it more general.

Patch 5 activates the support for the RGB output block in the VOP2 driver.

Patch 6 adds pinctrls for the 16-bit and 18-bit RGB data lines.

Tested on a custom board featuring the RK3568 SoC with a 18-bit RGB
display.

Looking forward to your comments!

Best regards,
Michael

Michael Riesch (6):
drm/rockchip: vop2: initialize possible_crtcs properly
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
drm/rockchip: rgb: add video_port parameter to init function
drm/rockchip: vop2: use symmetric function pair
vop2_{create,destroy}_crtcs
drm/rockchip: vop2: add support for the rgb output block
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to
rk356x

.../boot/dts/rockchip/rk3568-pinctrl.dtsi | 94 +++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 80 ++++++++++++----
drivers/gpu/drm/rockchip/rockchip_rgb.c | 19 ++--
drivers/gpu/drm/rockchip/rockchip_rgb.h | 6 +-
5 files changed, 172 insertions(+), 29 deletions(-)


base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
--
2.30.2

\
 
 \ /
  Last update: 2023-03-26 23:53    [W:0.135 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site