lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
From


On 23.01.2023 03:31, Bryan O'Donoghue wrote:
> The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi
> chipset.
>
> Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Co-developed-by: Jun Nie <jun.nie@linaro.org>
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> Co-developed-by: Benjamin Li <benl@squareup.com>
> Signed-off-by: Benjamin Li <benl@squareup.com>
> Co-developed-by: James Willcox <jwillcox@squareup.com>
> Signed-off-by: James Willcox <jwillcox@squareup.com>
> Co-developed-by: Leo Yan <leo.yan@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> Co-developed-by: Joseph Gates <jgates@squareup.com>
> Signed-off-by: Joseph Gates <jgates@squareup.com>
> Co-developed-by: Max Chen <mchen@squareup.com>
> Signed-off-by: Max Chen <mchen@squareup.com>
> Co-developed-by: Zac Crosby <zac@squareup.com>
> Signed-off-by: Zac Crosby <zac@squareup.com>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/apq8039-t2.dts | 545 ++++++++++++++++++++++++
> 2 files changed, 546 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b0423ca3e79fd..73ff8d3213d99 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
> new file mode 100644
> index 0000000000000..734b4d6054132
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
> @@ -0,0 +1,545 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020-2023, Linaro Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "msm8939.dtsi"
> +#include "msm8939-pm8916.dtsi"
> +#include <dt-bindings/arm/qcom,ids.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/sound/apq8016-lpass.h>
> +
> +/ {
> + model = "Square, Inc. T2 Devkit";
> + compatible = "square,apq8039-t2", "qcom,msm8939";
> +
> + qcom,board-id = <0x53 0x54>;
> + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>, <QCOM_ID_APQ8039 0x30000>;
> +
> + aliases {
> + mmc0 = &sdhc_1;
> + mmc1 = &sdhc_2;
> + serial0 = &blsp1_uart1;
> + serial1 = &blsp1_uart2;
> + };
> +
> + bl: backlight {
> + compatible = "gpio-backlight";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_backlight>;
pinctrl-0
pinctrl-names
everywhere, please

> + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
> + };
> +
> + chosen {
> + stdout-path = "serial1:115200n8";
> + };
> +
> + lcd_avdd_reg: lcd-avdd-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd_avdd";
> + regulator-min-microvolt = <5600000>;
> + regulator-max-microvolt = <5600000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_avdd_reg>;
> + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <300>;
> + enable-active-high;
> + };
> +
> + lcd_avee_reg: lcd-avee-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd_avee";
> + regulator-min-microvolt = <5600000>;
> + regulator-max-microvolt = <5600000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_avee_reg>;
> + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <300>;
> + enable-active-high;
> + };
> +
> + lcd_iovcc_reg: lcd-iovcc-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd_iovcc";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>;
> + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <300>;
> + enable-active-high;
> + };
> +
> + pp_crq_3v3_reg: pp-crq-3v3-regulator {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&tlmm_crq_reg>;
> + regulator-name = "pp_crq_3v3";
> + gpio = <&tlmm 12 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <0>;
> + enable-active-high;
> + };
> +
> + pp_spe_3v3_reg: pp-spe-3v3-regulator {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&tlmm_spe_reg>;
> + regulator-name = "pp_spe_3v3";
> + gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <0>;
> + enable-active-high;
> + };
> +};
> +
> +&blsp_i2c1 {
> + status = "okay";
> +};
> +
> +&blsp_i2c2 {
> + status = "okay";
> +};
> +
> +&blsp_i2c3 {
> + status = "okay";
> +
> + typec: tps6598x@38 {
> + compatible = "ti,tps6598x";
> + reg = <0x38>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "irq";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&typec_irq>;
> +
> + typec_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
Add a newline before the subnode

With these two:
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> + port {
> + typec_ep: endpoint {
> + remote-endpoint = <&otg_ep>;
> + };
> + };
> + };
> + };
> +};
> +
> +&blsp_i2c5 {
> + status = "okay";
> +};
> +
> +&blsp1_uart1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp1_uart1_default>;
> + pinctrl-1 = <&blsp1_uart1_sleep>;
> + status = "okay";
> +};
> +
> +&blsp1_uart2 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp1_uart2_default>;
> + pinctrl-1 = <&blsp1_uart2_sleep>;
> + status = "okay";
> +};
> +
> +&lpass {
> + status = "okay";
> +};
> +
> +&pm8916_gpios {
> + gpio-line-names =
> + "PM_GPIO1", /* WIFI_GPIO1_PRE */
> + "PM_GPIO2", /* WIFI_GPIO2_PRE */
> + "PM_GPIO3",
> + "PM_GPIO4";
> +};
> +
> +&pronto {
> + pinctrl-names = "default";
> + pinctrl-0 = <&wcnss_pin_a>;
> + status = "okay";
> +
> + iris {
> + compatible = "qcom,wcn3680";
> + };
> +};
> +
> +&smd_rpm_regulators {
> + vdd_l1_l2_l3-supply = <&pm8916_s3>;
> + vdd_l4_l5_l6-supply = <&pm8916_s4>;
> + vdd_l7-supply = <&pm8916_s4>;
> +
> + pm8916_s3: s3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + pm8916_s4: s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + /* l1 is fixed to 1225000, but not connected in schematic */
> +
> + pm8916_l2: l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pm8916_l4: l4 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + pm8916_l5: l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8916_l6: l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8916_l7: l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8916_l8: l8 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + pm8916_l9: l9 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8916_l10: l10 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8916_l11: l11 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8916_l12: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8916_l13: l13 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> + };
> +
> + pm8916_l14: l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8916_l15: l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8916_l16: l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8916_l17: l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + pm8916_l18: l18 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +};
> +
> +&sdhc_1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc1_default_state>;
> + pinctrl-1 = <&sdc1_sleep_state>;
> + status = "okay";
> +};
> +
> +&sound {
> + model = "apq8039-square-sndcard";
> + audio-routing = "AMIC2", "MIC BIAS Internal2";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&cdc_pdm_lines_default>;
> + pinctrl-1 = <&cdc_pdm_lines_sleep>;
> +
> + internal-codec-playback-dai-link {
> + link-name = "WCD";
> + cpu {
> + sound-dai = <&lpass MI2S_PRIMARY>;
> + };
> + codec {
> + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
> + };
> + };
> +
> + internal-codec-capture-dai-link {
> + link-name = "WCD-Capture";
> + cpu {
> + sound-dai = <&lpass MI2S_TERTIARY>;
> + };
> + codec {
> + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
> + };
> + };
> +};
> +
> +/*
> + * Line names are taken from the schematic of T2, Ver X03.
> + * July 14, 2018. Page 4 in particular.
> + */
> +&tlmm {
> + gpio-line-names =
> + "APQ_UART1_TX", /* GPIO_0 */
> + "APQ_UART1_RX",
> + "APQ_I2C1_SDA",
> + "APQ_I2C1_SCL",
> + "APQ_UART2_TX_1V8",
> + "APQ_UART2_RX_1V8",
> + "APQ_I2C2_SDA",
> + "APQ_I2C2_SCL",
> + "NC",
> + "APQ_LCD_IOVCC_EN",
> + "APQ_I2C3_SDA", /* GPIO_10 */
> + "APQ_I2C3_SCL",
> + "TOUCH_RST_1V8_L",
> + "NC",
> + "APQ_I2C4_SDA",
> + "APQ_I2C4_SCL",
> + "APQ_ID5",
> + "USB_DISCONNECT",
> + "APQ_I2C5_SDA",
> + "APQ_I2C5_SCL",
> + "APQ_USBC_SPI_MOSI", /* GPIO_20 */
> + "APQ_USBC_SPI_MISO",
> + "APQ_USBC_SPI_SS_L",
> + "APQ_USBC_SPI_CLK",
> + "APQ_LCD_TE0",
> + "APQ_LCD_RST_L",
> + "NC",
> + "NC",
> + "ACCELEROMETER_INT1",
> + "APQ_CAM_I2C0_SDA",
> + "APQ_CAM_I2C0_SCL", /* GPIO_30 */
> + "ACCELEROMETER_INT2",
> + "NC",
> + "NC",
> + "NC",
> + "APQ_K21_RST_1V8_L",
> + "NC",
> + "APQ_EDL_1V8",
> + "TP145",
> + "BT_SSBI",
> + "NC", /* GPIO_40 */
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "BT_CTRL",
> + "BT_DAT",
> + "PWR_GPIO_IN",
> + "PWR_GPIO_OUT", /* GPIO_50 */
> + "CARD_DET_MLB_L",
> + "HALL_SENSOR",
> + "TP63",
> + "TP64",
> + "TP65",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC", /* GPIO_60 */
> + "NC",
> + "APQ_K21_GPIO0_1V8",
> + "CDC_PDM_CLK",
> + "CDC_PDM_SYNC",
> + "CDC_PDM_TX",
> + "CDC_PDM_RX0",
> + "CDC_PDM_RX1",
> + "CDC_PDM_RX2",
> + "APQ_K21_GPIO1_1V8",
> + "NC", /* GPIO_70 */
> + "APQ_HUB_SEL_1V8",
> + "APQ_K21_GPIO2_1V8",
> + "APQ_K21_GPIO3_1V8",
> + "APQ_ID0",
> + "APQ_ID1",
> + "APQ_ID2",
> + "APQ_ID3",
> + "APQ_ID4",
> + "APQ_HUB_SUSP_IND",
> + "BOOT_CONFIG_0", /* GPIO_80 */
> + "BOOT_CONFIG_1",
> + "BOOT_CONFIG_2",
> + "BOOT_CONFIG_3",
> + "NC",
> + "NC",
> + "APQ_LCD_AVDD_EN",
> + "APQ_LCD_AVEE_EN",
> + "TP70",
> + "NC",
> + "APQ_DEBUG0", /* GPIO_90 */
> + "APQ_DEBUG1",
> + "APQ_DEBUG2",
> + "APQ_DEBUG3",
> + "TP165",
> + "NC",
> + "APQ_LNA_PWR_EN",
> + "NC",
> + "APQ_LCD_BL_EN",
> + "NC",
> + "APQ_LCD_ID0", /* GPIO_100 */
> + "APQ_LCD_ID1",
> + "USBC_GPIO5_1V8",
> + "NC",
> + "NC",
> + "NC",
> + "APQ_HUB_RST_1V8_L",
> + "USBC_I2C_IRQ_1V8_L",
> + "SPE_PWR_EN",
> + "NC",
> + "APQ_USB_ID", /* GPIO_110 */
> + "APQ_EXT_BUCK_VSEL",
> + "APQ_USB_ID_OUT",
> + "NC",
> + "PRNT_RST_L",
> + "APQ_CRQ_I2C_RDY_1V8",
> + "TYPEC_RST_1V8_H",
> + "CHG_BACKPWR_EN",
> + "CHG_PROCHOT_L",
> + "NC",
> + "USBC_GPIO7_1V8", /* GPIO_120 */
> + "NC";
> +
> + blsp1_uart1_default: blsp1-uart1-default-state {
> + pins = "gpio0", "gpio1";
> + function = "blsp_uart1";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + blsp1_uart1_sleep: blsp1-uart1-sleep-state {
> + pins = "gpio0", "gpio1";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + ext_buck_vsel_reg: ext-buck-vsel-reg-state {
> + function = "gpio";
> + pins = "gpio111";
> + drive-strength = <2>;
> + };
> +
> + pinctrl_backlight: backlight-state {
> + pins = "gpio98";
> + function = "gpio";
> + };
> +
> + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state {
> + pins = "gpio86";
> + function = "gpio";
> + };
> +
> + pinctrl_lcd_avee_reg: lcd-avee-reg-state {
> + pins = "gpio87";
> + function = "gpio";
> + };
> +
> + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state {
> + pins = "gpio9";
> + function = "gpio";
> + };
> +
> + pinctrl_lcd_rst: lcd-rst-state {
> + pins = "gpio25";
> + function = "gpio";
> + };
> +
> + pinctrl_otg_default: otg-default-state {
> + function = "gpio";
> + pins = "gpio17";
> + output-high;
> + };
> +
> + pinctrl_otg_device: otg-device-state {
> + function = "gpio";
> + pins = "gpio17";
> + output-low;
> + };
> +
> + pinctrl_otg_host: otg-host-state {
> + function = "gpio";
> + pins = "gpio17";
> + output-low;
> + };
> +
> + sq_spe_enable: sq-spe-enable-state {
> + pins = "gpio35";
> + function = "gpio";
> + output-low;
> + };
> +
> + tlmm_crq_reg: tlmm-crq-reg-state {
> + function = "gpio";
> + pins = "gpio12";
> + output-high;
> + };
> +
> + tlmm_spe_reg: tlmm-spe-reg-state {
> + pins = "gpio108";
> + function = "gpio";
> + output-high;
> + };
> +
> + typec_irq: typec-irq-state {
> + function = "gpio";
> + pins = "gpio107";
> + bias-pull-up;
> + input-enable;
> + };
> +};
> +
> +&usb {
> + pinctrl-names = "default", "host", "device";
> + pinctrl-0 = <&pinctrl_otg_default>;
> + pinctrl-1 = <&pinctrl_otg_host>;
> + pinctrl-2 = <&pinctrl_otg_device>;
> + pin-switch-delay-us = <100000>;
> + usb-role-switch;
> + status = "okay";
> +
> + port {
> + otg_ep: endpoint {
> + remote-endpoint = <&typec_ep>;
> + };
> + };
> +};
> +
> +&wcd_codec {
> + qcom,hphl-jack-type-normally-open;
> + qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
> + qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
> + status = "okay";
> +};

\
 
 \ /
  Last update: 2023-03-26 23:52    [W:0.215 / U:1.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site