lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 3/3] soc: qcom: dcc: Add QAD support for DCC
Date
Add QAD debugfs file for DCC which can be used to enable/disable
the QAD for a list. QAD is used to specify the access control
for DCC configurations, on enabling it the access control to
dcc configuration space is restricted. On setting the QAD value,
the list gets locked out for a particular component and cannot
be used by the rest.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
---
Documentation/ABI/testing/debugfs-driver-dcc | 8 ++++
drivers/soc/qcom/dcc.c | 68 ++++++++++++++++++++++++++++
2 files changed, 76 insertions(+)

diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc
index 6f5d965..a3c4657 100644
--- a/Documentation/ABI/testing/debugfs-driver-dcc
+++ b/Documentation/ABI/testing/debugfs-driver-dcc
@@ -141,3 +141,11 @@ Description:
This debugfs interface is used for enabling the
hwtrigger. Hwtrigger can be enabled by writing
a '1' to the file.
+
+What: /sys/kernel/debug/dcc/.../[list-number]/QAD
+Date: January 2023
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This debugfs interface is used for enabling the
+ QAD. QAD can be enabled by writing a '1' to the
+ file.
diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c
index a75b9af..eeeaa8b 100644
--- a/drivers/soc/qcom/dcc.c
+++ b/drivers/soc/qcom/dcc.c
@@ -38,6 +38,7 @@
#define DCC_LL_SW_TRIGGER 0x2c
#define DCC_LL_BUS_ACCESS_STATUS 0x30
#define DCC_CTI_TRIG 0x34
+#define DCC_QAD_OUTPUT 0x38

/* Default value used if a bit 6 in the HW_INFO register is set. */
#define DCC_FIX_LOOP_OFFSET 16
@@ -118,6 +119,7 @@ struct dcc_config_entry {
* @enable_bitmap: Bitmap to capture the enabled status of each linked list of addresses
* @cti_bitmap: Bitmap to capture the cti-trigger status of each linked list of addresses
* @hwtrig_bitmap: Bitmap to capture the hwtrig status of each linked list of addresses
+ * @qad_bitmap: Bitmap to capture the qad status of each linked list of addresses
*/
struct dcc_drvdata {
void __iomem *base;
@@ -137,6 +139,7 @@ struct dcc_drvdata {
unsigned long *enable_bitmap;
unsigned long *cti_bitmap;
unsigned long *hwtrig_bitmap;
+ unsigned long *qad_bitmap;
};

struct dcc_cfg_attr {
@@ -599,6 +602,8 @@ static int dcc_enable(struct dcc_drvdata *drvdata, unsigned int curr_list)
dcc_list_writel(drvdata, DCC_TRIGGER_MASK,
curr_list, DCC_LL_CFG);
if (drvdata->mem_map_ver == 3) {
+ dcc_list_writel(drvdata, test_bit(curr_list, drvdata->qad_bitmap), curr_list,
+ DCC_QAD_OUTPUT);
dcc_list_writel(drvdata, test_bit(curr_list, drvdata->cti_bitmap), curr_list,
DCC_CTI_TRIG);
if (test_bit(curr_list, drvdata->hwtrig_bitmap))
@@ -1245,6 +1250,64 @@ static const struct file_operations hwtrigger_fops = {
.llseek = generic_file_llseek,
};

+static ssize_t qad_read(struct file *filp, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char *buf;
+ int curr_list;
+
+ struct dcc_drvdata *drvdata = filp->private_data;
+
+ curr_list = dcc_filp_curr_list(filp);
+
+ mutex_lock(&drvdata->mutex);
+
+ if (test_bit(curr_list, drvdata->qad_bitmap))
+ buf = "Y\n";
+ else
+ buf = "N\n";
+
+ mutex_unlock(&drvdata->mutex);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+}
+
+static ssize_t qad_write(struct file *filp, const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ int ret, curr_list;
+ bool val;
+ struct dcc_drvdata *drvdata = filp->private_data;
+
+ curr_list = dcc_filp_curr_list(filp);
+
+ if (drvdata->mem_map_ver != 3) {
+ dev_err(drvdata->dev, "QAD is not supported\n");
+ return -EINVAL;
+ }
+
+ if (test_bit(curr_list, drvdata->enable_bitmap))
+ return -EBUSY;
+
+ ret = kstrtobool_from_user(userbuf, count, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val)
+ set_bit(curr_list, drvdata->qad_bitmap);
+ else
+ clear_bit(curr_list, drvdata->qad_bitmap);
+
+ return count;
+}
+
+static const struct file_operations qad_fops = {
+ .read = qad_read,
+ .write = qad_write,
+ .open = simple_open,
+ .llseek = generic_file_llseek,
+};
+
static void dcc_delete_debug_dir(struct dcc_drvdata *drvdata)
{
debugfs_remove_recursive(drvdata->dbg_dir);
@@ -1276,6 +1339,7 @@ static void dcc_create_debug_dir(struct dcc_drvdata *drvdata)
drvdata, &config_reset_fops);
debugfs_create_file("ctitrigger", 0600, list, drvdata, &ctitrigger_fops);
debugfs_create_file("hwtrigger", 0600, list, drvdata, &hwtrigger_fops);
+ debugfs_create_file("QAD", 0600, list, drvdata, &qad_fops);
}

static ssize_t dcc_sram_read(struct file *file, char __user *data,
@@ -1447,6 +1511,10 @@ static int __init dcc_probe(struct platform_device *pdev)
if (!drvdata->hwtrig_bitmap)
return -ENOMEM;

+ drvdata->qad_bitmap = devm_bitmap_alloc(dev, drvdata->nr_link_list, GFP_KERNEL);
+ if (!drvdata->qad_bitmap)
+ return -ENOMEM;
+
drvdata->cfg_head = devm_kcalloc(dev, drvdata->nr_link_list,
sizeof(*drvdata->cfg_head), GFP_KERNEL);
if (!drvdata->cfg_head)
--
2.7.4
\
 
 \ /
  Last update: 2023-03-26 23:53    [W:0.071 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site