lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    SubjectRe: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
    Hi,

    On Mon, Jan 23, 2023 at 8:35 AM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
    >
    > On 22.01.2023 18:24, Jonathan Cameron wrote:
    > > On Wed, 18 Jan 2023 12:06:23 +0200
    > > Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:
    > >
    > >> The node name can contain an address part which is unused
    > >> by the driver. Moreover, this string is propagated into
    > >> the userspace label, sysfs filenames *and breaking ABI*.
    > >>
    > >> Cut the address part out before assigning the channel name.
    > >>
    > >> Fixes: 4f47a236a23d ("iio: adc: qcom-spmi-adc5: convert to device properties")
    > >> Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
    > >> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    > >
    > > LGTM, but given it will have ABI impact, I'd like to hear from
    > > Andy, Bjorn or Konrad as maintainers and /or Dmitry as someone
    > > who has touched this driver fairly recently.
    > + Doug
    >
    > Unless the Chromium folks relied on the old names (they're the
    > only ones I can think of that actually could have tapped into
    > this), I say green light!

    Thanks for the CC. I _think_ the only place we use these ADCs is for
    certain thermistors and I think that those are all just hooked up in
    the device tree, so the channel name doesn't matter. I'll also note
    that no Qualcomm Chromebooks are shipping with anything newer than
    kernel 5.15 right now, and (I checked) the ChromeOS 5.15 tree doesn't
    have commit 4f47a236a23d ("iio: adc: qcom-spmi-adc5: convert to device
    properties"). Thus, even if I'm wrong and the name is used someplace
    hidden then the "old" name would be better for us. I haven't tested
    the patch myself, but it sounds as if ${SUBJECT} patch is actually
    moving us back to the old name.

    +Matthias to keep me honest since he's spent more time with the ADCs.

    > Konrad
    > >
    > > Mostly I want to be sure they know this exists before it causes surprise.
    > >
    > > Jonathan
    > >
    > >> ---
    > >> v2: rephrased commit message (Marijn), fixed compilation issue (Marijin)
    > >> drivers/iio/adc/qcom-spmi-adc5.c | 10 +++++++++-
    > >> 1 file changed, 9 insertions(+), 1 deletion(-)
    > >>
    > >> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
    > >> index e90c299c913a..c2d5e06f137a 100644
    > >> --- a/drivers/iio/adc/qcom-spmi-adc5.c
    > >> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
    > >> @@ -628,12 +628,20 @@ static int adc5_get_fw_channel_data(struct adc5_chip *adc,
    > >> struct fwnode_handle *fwnode,
    > >> const struct adc5_data *data)
    > >> {
    > >> - const char *name = fwnode_get_name(fwnode), *channel_name;
    > >> + const char *channel_name;
    > >> + char *name;
    > >> u32 chan, value, varr[2];
    > >> u32 sid = 0;
    > >> int ret;
    > >> struct device *dev = adc->dev;
    > >>
    > >> + name = devm_kasprintf(dev, GFP_KERNEL, "%pfwP", fwnode);
    > >> + if (!name)
    > >> + return -ENOMEM;
    > >> +
    > >> + /* Cut the address part */
    > >> + name[strchrnul(name, '@') - name] = '\0';
    > >> +
    > >> ret = fwnode_property_read_u32(fwnode, "reg", &chan);
    > >> if (ret) {
    > >> dev_err(dev, "invalid channel number %s\n", name);
    > >

    \
     
     \ /
      Last update: 2023-03-26 23:53    [W:2.647 / U:0.260 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site