lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 08/14] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A
On Fri, 20 Jan 2023 17:56:39 +0100
Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:

> On 15/12/2022 10:02:09-0500, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> >
> > The PCF2127 and PCF2129 have one output interrupt pin. The PCF2131 has
> > two, named INT_A and INT_B. The hardware support that any interrupt
> > source can be routed to either one or both of them.
> >
> > Force all interrupt sources to go to the INT A pin.
> >
> > Support to route any interrupt source to INT A/B pins is not supported
> > by this driver at the moment.
> >
>
> The main issue with this is that this will created a breaking change
> once someone needs support for INTB

We already had a discussion about this a while ago:

https://lore.kernel.org/linux-rtc/7be3f9541eaed7e17e334267e49665f442b1b458.camel@dimonoff.com/

What exactly do you suggest? I personnaly don't have any need for INTB at the moment and I would prefer to avoid the great complexity of supporting any combination of routing interrupts to any A ou pins.


> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > ---
> > drivers/rtc/rtc-pcf2127.c | 35 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> >
> > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > index 4148e135f935..68af4d0438b8 100644
> > --- a/drivers/rtc/rtc-pcf2127.c
> > +++ b/drivers/rtc/rtc-pcf2127.c
> > @@ -191,6 +191,7 @@ struct pcf21xx_config {
> > int max_register;
> > unsigned int has_nvmem:1;
> > unsigned int has_bit_wd_ctl_cd0:1;
> > + unsigned int has_int_a_b:1; /* PCF2131 supports two interrupt outputs. */
> > u8 regs_td_base; /* Time/data base registers. */
> > u8 regs_alarm_base; /* Alarm function base registers. */
> > u8 reg_wd_ctl; /* Watchdog control register. */
> > @@ -879,6 +880,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > .max_register = 0x1d,
> > .has_nvmem = 1,
> > .has_bit_wd_ctl_cd0 = 1,
> > + .has_int_a_b = 0,
> > .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > .regs_alarm_base = PCF2127_REG_ALARM_BASE,
> > .reg_wd_ctl = PCF2127_REG_WD_CTL,
> > @@ -902,6 +904,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > .max_register = 0x19,
> > .has_nvmem = 0,
> > .has_bit_wd_ctl_cd0 = 0,
> > + .has_int_a_b = 0,
> > .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> > .regs_alarm_base = PCF2127_REG_ALARM_BASE,
> > .reg_wd_ctl = PCF2127_REG_WD_CTL,
> > @@ -925,6 +928,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> > .max_register = 0x36,
> > .has_nvmem = 0,
> > .has_bit_wd_ctl_cd0 = 0,
> > + .has_int_a_b = 1,
> > .regs_td_base = PCF2131_REG_TIME_DATE_BASE,
> > .regs_alarm_base = PCF2131_REG_ALARM_BASE,
> > .reg_wd_ctl = PCF2131_REG_WD_CTL,
> > @@ -1017,6 +1021,28 @@ static int pcf2127_enable_ts(struct device *dev, int ts_id)
> > return ret;
> > }
> >
> > +/* Route all interrupt sources to INT A pin. */
> > +static int pcf2127_configure_interrupt_pins(struct device *dev)
> > +{
> > + struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + /* Mask bits need to be cleared to enable corresponding
> > + * interrupt source.
> > + */
> > + ret = regmap_write(pcf2127->regmap,
> > + PCF2131_REG_INT_A_MASK1, 0);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_write(pcf2127->regmap,
> > + PCF2131_REG_INT_A_MASK2, 0);
> > + if (ret)
> > + return ret;
> > +
> > + return ret;
> > +}
> > +
> > static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> > int alarm_irq, const char *name, const struct pcf21xx_config *config)
> > {
> > @@ -1076,6 +1102,15 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> > set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
> > }
> >
> > + if (pcf2127->cfg->has_int_a_b) {
> > + /* Configure int A/B pins, independently of alarm_irq. */
> > + ret = pcf2127_configure_interrupt_pins(dev);
> > + if (ret) {
> > + dev_err(dev, "failed to configure interrupt pins\n");
> > + return ret;
> > + }
> > + }
> > +
> > if (pcf2127->cfg->has_nvmem) {
> > struct nvmem_config nvmem_cfg = {
> > .priv = pcf2127,
> > --
> > 2.30.2
> >
>
> --
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>


--
Hugo Villeneuve <hugo@hugovil.com>

\
 
 \ /
  Last update: 2023-03-26 23:53    [W:0.144 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site