lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/12] rtc: rx8010: use IRQ flags obtained from fwnode
Date
From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Allow the IRQ type to be passed from the device tree if available as there
may be components changing the trigger type of the interrupt between the
RTC and the IRQ controller.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-rx8010.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c
index 5e2fd39f70bb..b9c8dad26208 100644
--- a/drivers/rtc/rtc-rx8010.c
+++ b/drivers/rtc/rtc-rx8010.c
@@ -394,9 +394,14 @@ static int rx8010_probe(struct i2c_client *client)
return PTR_ERR(rx8010->rtc);

if (client->irq > 0) {
+ unsigned long irqflags = IRQF_TRIGGER_LOW;
+
+ if (dev_fwnode(&client->dev))
+ irqflags = 0;
+
err = devm_request_threaded_irq(dev, client->irq, NULL,
rx8010_irq_1_handler,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ irqflags | IRQF_ONESHOT,
"rx8010", client);
if (err) {
dev_err(dev, "unable to request IRQ\n");
--
2.39.1
\
 
 \ /
  Last update: 2023-03-26 23:53    [W:0.172 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site