lkml.org 
[lkml]   [2023]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
On Sun, 22 Jan 2023 at 17:57, Kathiravan Thirumoorthy
<quic_kathirav@quicinc.com> wrote:
>
>
> On 1/21/2023 4:53 PM, Robert Marko wrote:
> > IPQ8074 has efuses like other Qualcomm SoC-s that are required for
> > determining various HW quirks which will be required later for CPR etc,
> > so lets add the QFPROM node for start.
> >
> > Individidual fuses will be added as they are required.
> >
> > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > ---
> > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > index 8eba586065a3..f29491f647fe 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > @@ -301,6 +301,13 @@ mdio: mdio@90000 {
> > status = "disabled";
> > };
> >
> > + qfprom: efuse@a4000 {
> > + compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
> > + reg = <0x000a4000 0x1000>;
>
>
> From the HW document, I see the overall size of this region is 0x2000,
> any reason to stick with 0x1000?

Like always, I dont have access to docs and 0x1000 is all I could find
downstream
being used.

Any chance you can share the regions inside of QFPROM, it would be great to use
the ECC corrected one if available.

Regards,
Robert
>
> Thanks, Kathiravan T.
>
>
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + };
> > +
> > prng: rng@e3000 {
> > compatible = "qcom,prng-ee";
> > reg = <0x000e3000 0x1000>;

\
 
 \ /
  Last update: 2023-03-26 23:51    [W:0.087 / U:2.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site