lkml.org 
[lkml]   [2023]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add CCI bus support for SM6350
Date
Add the camera clock controller node and CCI nodes to sm6350 dtsi and enable
the i2c busses on Fairphone 4 dts.

This is tested using PM8008 regulator patches from the lists which power the
cameras, and using i2cdetect/i2cget/i2cset reading the sensor ID registers.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes in v2:
- Correct ordering of attributes in sm6350.dtsi (#*-cells, pinctrl-names,
bias-*)
- Link to v1: https://lore.kernel.org/r/20221213-sm6350-cci-v1-0-e5d0c36e0c4f@fairphone.com

---
Luca Weiss (4):
dt-bindings: i2c: qcom-cci: Document SM6350 compatible
arm64: dts: qcom: sm6350: Add camera clock controller
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses

.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/sm6350.dtsi | 141 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 20 +++
3 files changed, 163 insertions(+)
---
base-commit: 1578f85d549045aac441821064e7953732460e51
change-id: 20221213-sm6350-cci-38baf19ace3b

Best regards,
--
Luca Weiss <luca.weiss@fairphone.com>

\
 
 \ /
  Last update: 2023-03-26 23:49    [W:0.080 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site