lkml.org 
[lkml]   [2023]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next v6 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration
Hi Siddarth,

On Wed, Jan 18, 2023 at 6:48 AM Siddharth Vadapalli <s-vadapalli@ti.com> wrote:
> On 17/01/23 19:25, Geert Uytterhoeven wrote:
> > On Wed, Jan 4, 2023 at 11:37 AM Siddharth Vadapalli <s-vadapalli@ti.com> wrote:
> >> Use PHY framework APIs to initialize the SERDES PHY connected to CPSW MAC.
> >>
> >> Define the functions am65_cpsw_disable_phy(), am65_cpsw_enable_phy(),
> >> am65_cpsw_disable_serdes_phy() and am65_cpsw_enable_serdes_phy().
> >>
> >> Add new member "serdes_phy" to struct "am65_cpsw_slave_data" to store the
> >> SERDES PHY for each port, if it exists. Use it later while disabling the
> >> SERDES PHY for each port.
> >>
> >> Power on and initialize the SerDes PHY in am65_cpsw_nuss_init_slave_ports()
> >> by invoking am65_cpsw_enable_serdes_phy().
> >>
> >> Power off the SerDes PHY in am65_cpsw_nuss_remove() by invoking
> >> am65_cpsw_disable_serdes_phy().
> >>
> >> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> >
> > Thanks for your patch, which is now commit dab2b265dd23ef8f ("net:
> > ethernet: ti: am65-cpsw: Add support for SERDES configuration")
> > in net-next.
> >
> >> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> >> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c

> >> +static int am65_cpsw_init_serdes_phy(struct device *dev, struct device_node *port_np,
> >> + struct am65_cpsw_port *port)
> >> +{
> >> + const char *name = "serdes-phy";
> >> + struct phy *phy;
> >> + int ret;
> >> +
> >> + phy = devm_of_phy_get(dev, port_np, name);
> >> + if (PTR_ERR(phy) == -ENODEV)
> >> + return 0;
> >> +
> >> + /* Serdes PHY exists. Store it. */
> >
> > "phy" may be a different error here (e.g. -EPROBE_DEFER)...
>
> The Serdes is automatically configured for multi-link protocol (Example: PCIe +
> QSGMII) by the Serdes driver, due to which it is not necessary to invoke the
> Serdes configuration via phy_init(). However, for single-link protocol (Example:
> Serdes has to be configured only for SGMII), the Serdes driver doesn't configure
> the Serdes unless requested. For this case, the am65-cpsw driver explicitly
> invokes phy_init() for the Serdes to be configured, by looking up the optional
> device-tree phy named "serdes-phy". For this reason, the above section of code
> is actually emulating a non-existent "devm_of_phy_optional_get()". The
> "devm_of_phy_optional_get()" function is similar to the
> "devm_phy_optional_get()" function in the sense that the "serdes-phy" phy in the
> device-tree is optional and it is not truly an error if the property isn't present.

Yeah, I noticed while adding devm_phy_optional_get(), and looking for
possible users.
See "[PATCH treewide 0/7] phy: Add devm_of_phy_optional_get() helper"
https://lore.kernel.org/all/cover.1674036164.git.geert+renesas@glider.be

> Thank you for pointing out that if the Serdes driver is built as a module and
> the am65-cpsw driver runs first, then the "phy" returned for "serdes-phy" will
> be "-EPROBE_DEFER".
>
> >
> >> + port->slave.serdes_phy = phy;
> >> +
> >> + ret = am65_cpsw_enable_phy(phy);
> >
> > ... so it will crash when dereferencing phy in phy_init().
> >
> > I think you want to add an extra check above:
> >
> > if (IS_ERR(phy))
> > return PTR_ERR(phy);
>
> Please let me know if posting a "Fixes" patch for fixing this net-next commit is
> the right process to address this.

I think it is, as devm_of_phy_optional_get() might not make it in time.

> >> @@ -1959,6 +2021,11 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
> >
> > Right out of context we have:
> >
> > port->slave.ifphy = devm_of_phy_get(dev, port_np, NULL);
> > if (IS_ERR(port->slave.ifphy)) {
> > ret = PTR_ERR(port->slave.ifphy);
> > dev_err(dev, "%pOF error retrieving port phy: %d\n",
> > port_np, ret);
> >
> > So if there is only one PHY (named "serdes-phy") in DT, it will be
> > used for both ifphy and serdes_phy. Is that intentional?
>
> The PHY corresponding to "ifphy" is meant to be the CPSW MAC's PHY and not the
> Serdes PHY. The CPSW MAC's PHY is configured by the
> drivers/phy/ti/phy-gmii-sel.c driver and this is NOT an optional PHY, unlike the
> Serdes PHY. Therefore, it is assumed that the CPSW MAC's PHY is always provided
> in the device-tree, while the Serdes PHY is optional, depending on whether the
> Serdes is being configured for single-link protocol or multi-link protocol.
> Please let me know if this appears to be an issue and I will fix it based on
> your suggestion.

Hence this should be documented in the DT bindings. Please document
there can be 1 or 2 phys, with an optional "phys-names" property,
listing "ifphy" and "serdes-phy" (the DT people might request a rename).

Thanks!

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2023-03-26 23:45    [W:0.103 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site