lkml.org 
[lkml]   [2023]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible
Date

On Wed, 18 Jan 2023 17:22:40 +0100, Neil Armstrong wrote:
> This documents the compatible for the component used to boot the
> aDSP, cDSP and MPSS on the SM8550 SoC.
>
> The SM8550 boot process on SM8550 now requires a secondary "Devicetree"
> firmware to be passed along the main Firmware, and the cDSP a new power
> domain named "NSP".
>
> A third memory domain for the DSM memory zone is also needed for the MPSS
> PAS bindings.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> .../bindings/remoteproc/qcom,sm8550-pas.yaml | 178 +++++++++++++++++++++
> 1 file changed, 178 insertions(+)
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/qcom,pas-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.example.dtb: remoteproc@30000000: False schema does not allow {'compatible': ['qcom,sm8550-adsp-pas'], 'reg': [[805306368, 256]], 'clocks': [[4294967295, 0]], 'clock-names': ['xo'], 'interrupts-extended': [[4294967295, 6, 1], [4294967295, 0, 1], [4294967295, 1, 1], [4294967295, 2, 1], [4294967295, 3, 1]], 'interrupt-names': ['wdog', 'fatal', 'ready', 'handover', 'stop-ack'], 'memory-region': [[4294967295], [4294967295]], 'firmware-name': ['qcom/sm8550/adsp.mbn', 'qcom/sm8550/adsp_dtb.mbn'], 'power-domains': [[4294967295], [4294967295]], 'power-domain-names': ['lcx', 'lmx'], 'qcom,qmp': [[4294967295]], 'qcom,smem-states': [[4294967295, 0]], 'qcom,smem-state-names': ['stop'], 'glink-edge': {'interrupts-extended': [[4294967295, 3, 0, 1]], 'mboxes': [[4294967295, 3, 0]], 'label': ['lpass'], 'qcom,remote-pid': [[2]]}, '$nodename': ['remoteproc@30000000']}
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.example.dtb: remoteproc@30000000: Unevaluated properties are not allowed ('glink-edge', 'qcom,smem-state-names', 'qcom,smem-states' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221114-narmstrong-sm8550-upstream-remoteproc-v4-2-54154c08c0b7@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

\
 
 \ /
  Last update: 2023-03-26 23:46    [W:0.557 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site