Messages in this thread | | | Date | Fri, 13 Jan 2023 14:13:34 +0100 | Subject | Re: [PATCH v9 0/5] Add BananaPi R3 | From | Matthias Brugger <> |
| |
Patches 2-5 applied!
Thanks!
On 06/01/2023 16:28, Frank Wunderlich wrote: > From: Frank Wunderlich <frank-w@public-files.de> > > This Series adds some Nodes to mt7986 devicetree and the BananaPi R3 > > This version is rebased on linux 6.2-rc1 and i dropped already applied > Patches from v7. > > i had run full dtbs-check but i end up with some strange warnings in > ethernet-node that should not come up as phy-handle and sfp/managed > properties are already defined. These errors also came up for mt7986a-rfb. > > phy-handle made optional > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/mediatek,net.yaml#n265 > > property sfp/managed (which is included for mac subnode in yaml above): > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml#n137 > > changes: > v9: > - drop model string override in sd-dtso > > v8: > - drop model string override in emmc-dtso > - drop cs-gpios from spi-nodes > - add interrupt-settings for mt7531 switch > > v7: > - rebase on next so dropped already applied patches > - squashed overlay-patch into the bpi-r3 base support > - moved regulators from mmc-dts to common dtsi > - changed dtsi to dts (as board base dtb) and mmc-dts to overlays > - renamed overlays to dtso > - removed angelos RB because of changes in bpi-r3 patch > > v6: > - dropped regulators from usb-patch as suggested by chunfeng yun > - moved 3v3 regulator to mmc-patch as it is needed for emmc to work > rfbs were tested by sam shih, r3 by me > - dropped RB from AngeloGioacchino from mmc-patch due to this change > - fixed links in coverletter which were broken in v5 > - i hope this series is sent without errors now (my mailprovider limited > mails last 2 times while sending part 10) > > v5: > - changed usb ranges/reg/unit-adress > - added reviewd-by's except usb-part due to changes > > v4: > - dropped RFC prefix > - rebase on matthias' mtk dts-next (for 6.2) branch > - added author information to overlays > - fixed sfp binding error > - added fix for moving wed_pcie node > - readded missing compatible patches > > v3: > - changed mmc pull-ups > - added patch for board binding (sent separately before) > - added pcie node in mt7986 (not yet again in r3) > - added dt overlays > > Frank Wunderlich (2): > dt-bindings: phy: mediatek,tphy: add support for mt7986 > arm64: dts: mt7986: add Bananapi R3 > > Sam Shih (3): > arm64: dts: mt7986: add usb related device nodes > arm64: dts: mt7986: add mmc related device nodes > arm64: dts: mt7986: add pcie related device nodes > > .../bindings/phy/mediatek,tphy.yaml | 1 + > arch/arm64/boot/dts/mediatek/Makefile | 5 + > .../mt7986a-bananapi-bpi-r3-emmc.dtso | 29 ++ > .../mt7986a-bananapi-bpi-r3-nand.dtso | 55 +++ > .../mediatek/mt7986a-bananapi-bpi-r3-nor.dtso | 68 +++ > .../mediatek/mt7986a-bananapi-bpi-r3-sd.dtso | 23 + > .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 450 ++++++++++++++++++ > arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 120 +++++ > arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 122 +++++ > arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 8 + > 10 files changed, 881 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts >
| |