lkml.org 
[lkml]   [2022]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
From
Hi

Am 06.09.22 um 23:52 schrieb Daniel Vetter:
> On Sat, Aug 06, 2022 at 07:32:24PM +0300, Markuss Broks wrote:
>> Add early console support for generic linear framebuffer devices.
>> This driver supports probing from cmdline early parameters
>> or from the device-tree using information in simple-framebuffer node.
>> The EFI functionality should be retained in whole.
>> The driver was disabled on ARM because of a bug in early_ioremap
>> implementation on ARM and on IA64 because of lack of early_memremap_prot.
>>
>> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
>> ---
>> .../admin-guide/kernel-parameters.txt | 12 +-
>> MAINTAINERS | 5 +
>> drivers/firmware/efi/Kconfig | 7 +-
>> drivers/firmware/efi/Makefile | 1 -
>> drivers/firmware/efi/earlycon.c | 246 --------------
>> drivers/video/console/Kconfig | 11 +
>> drivers/video/console/Makefile | 1 +
>> drivers/video/console/earlycon.c | 305 ++++++++++++++++++
>
> Ok I have a more fundamental issue with this than the lack of proper patch
> splitting I mentioned in the other thread.
>
> This is the wrong place.
>
> drivers/video/console is about the various vt console implementations,
> which supply a struct consw to con_register_driver.
>
> This otoh is an (early) kernel/printk console implemented using struct
> console. Totally different thing, and really shouldn't end up in
> drivers/video/console imo. Somewhere in drivers/firmware might still be
> the best place, the sysfb stuff is also there. Maybe
> drivers/firmware/sysfb_earlycon.c?

Then better use just earlycon.c in that directory. We use the sysfb_
prefix for code of the framebuffer devices that simpledrm and simplefb
run on top. It would not fit well here.

Best regards
Thomas

>
> Also patch split is still an issue here, like I and Greg already said.
> -Daniel
>
>> 8 files changed, 332 insertions(+), 256 deletions(-)
>> delete mode 100644 drivers/firmware/efi/earlycon.c
>> create mode 100644 drivers/video/console/earlycon.c
>>
>> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
>> index 8090130b544b0701237a7b657a29c83c000a60f4..bccb1ac8978eb5cf7e2bb20834b1881b27040666 100644
>> --- a/Documentation/admin-guide/kernel-parameters.txt
>> +++ b/Documentation/admin-guide/kernel-parameters.txt
>> @@ -1281,12 +1281,9 @@
>> specified address. The serial port must already be
>> setup and configured. Options are not yet supported.
>>
>> - efifb,[options]
>> + efifb
>> Start an early, unaccelerated console on the EFI
>> - memory mapped framebuffer (if available). On cache
>> - coherent non-x86 systems that use system memory for
>> - the framebuffer, pass the 'ram' option so that it is
>> - mapped with the correct attributes.
>> + memory mapped framebuffer (if available).
>>
>> linflex,<addr>
>> Use early console provided by Freescale LINFlexD UART
>> @@ -1294,6 +1291,11 @@
>> address must be provided, and the serial port must
>> already be setup and configured.
>>
>> + simplefb,<addr>,<width>x<height>x<bpp>
>> + Use early console with simple framebuffer that is
>> + pre-initialized by firmware. A valid base address,
>> + width, height and pixel size must be provided.
>> +
>> earlyprintk= [X86,SH,ARM,M68k,S390]
>> earlyprintk=vga
>> earlyprintk=sclp
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 1fc9ead83d2aa3e60ccc4cfa8ee16df09ef579bf..af8b8e289483b6a264d477145061bd0e0ba34a25 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -7033,6 +7033,11 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/
>> T: git git://linuxtv.org/anttip/media_tree.git
>> F: drivers/media/tuners/e4000*
>>
>> +EARLY CONSOLE FRAMEBUFFER DRIVER
>> +M: Markuss Broks <markuss.broks@gmail.com>
>> +S: Maintained
>> +F: drivers/video/console/earlycon.c
>> +
>> EARTH_PT1 MEDIA DRIVER
>> M: Akihiro Tsukada <tskd08@gmail.com>
>> L: linux-media@vger.kernel.org
>> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
>> index 7aa4717cdcac46f91dd202f868c463388eb02735..ea76ccfb9bcd8ba44ddca06052eaa442ed6c30f7 100644
>> --- a/drivers/firmware/efi/Kconfig
>> +++ b/drivers/firmware/efi/Kconfig
>> @@ -259,10 +259,9 @@ config EFI_DISABLE_PCI_DMA
>> may be used to override this option.
>>
>> config EFI_EARLYCON
>> - def_bool y
>> - depends on SERIAL_EARLYCON && !ARM && !IA64
>> - select FONT_SUPPORT
>> - select ARCH_USE_MEMREMAP_PROT
>> + bool "EFI early console support"
>> + select FB_EARLYCON
>> + default y
>>
>> config EFI_CUSTOM_SSDT_OVERLAYS
>> bool "Load custom ACPI SSDT overlay from an EFI variable"
>> diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
>> index c02ff25dd47707090a2ab86ee4f330e467f878f5..64eea61fbb43d76ec2d5416d467dfbb9aa21bda0 100644
>> --- a/drivers/firmware/efi/Makefile
>> +++ b/drivers/firmware/efi/Makefile
>> @@ -44,6 +44,5 @@ obj-$(CONFIG_ARM64) += $(arm-obj-y)
>> riscv-obj-$(CONFIG_EFI) := efi-init.o riscv-runtime.o
>> obj-$(CONFIG_RISCV) += $(riscv-obj-y)
>> obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
>> -obj-$(CONFIG_EFI_EARLYCON) += earlycon.o
>> obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
>> obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o
>> diff --git a/drivers/firmware/efi/earlycon.c b/drivers/firmware/efi/earlycon.c
>> deleted file mode 100644
>> index a52236e11e5f73ddea5bb1f42ca2ca7c42425dab..0000000000000000000000000000000000000000
>> --- a/drivers/firmware/efi/earlycon.c
>> +++ /dev/null
>> @@ -1,246 +0,0 @@
>> -// SPDX-License-Identifier: GPL-2.0
>> -/*
>> - * Copyright (C) 2013 Intel Corporation; author Matt Fleming
>> - */
>> -
>> -#include <linux/console.h>
>> -#include <linux/efi.h>
>> -#include <linux/font.h>
>> -#include <linux/io.h>
>> -#include <linux/kernel.h>
>> -#include <linux/serial_core.h>
>> -#include <linux/screen_info.h>
>> -
>> -#include <asm/early_ioremap.h>
>> -
>> -static const struct console *earlycon_console __initdata;
>> -static const struct font_desc *font;
>> -static u32 efi_x, efi_y;
>> -static u64 fb_base;
>> -static bool fb_wb;
>> -static void *efi_fb;
>> -
>> -/*
>> - * EFI earlycon needs to use early_memremap() to map the framebuffer.
>> - * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon',
>> - * memremap() should be used instead. memremap() will be available after
>> - * paging_init() which is earlier than initcall callbacks. Thus adding this
>> - * early initcall function early_efi_map_fb() to map the whole EFI framebuffer.
>> - */
>> -static int __init efi_earlycon_remap_fb(void)
>> -{
>> - /* bail if there is no bootconsole or it has been disabled already */
>> - if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
>> - return 0;
>> -
>> - efi_fb = memremap(fb_base, screen_info.lfb_size,
>> - fb_wb ? MEMREMAP_WB : MEMREMAP_WC);
>> -
>> - return efi_fb ? 0 : -ENOMEM;
>> -}
>> -early_initcall(efi_earlycon_remap_fb);
>> -
>> -static int __init efi_earlycon_unmap_fb(void)
>> -{
>> - /* unmap the bootconsole fb unless keep_bootcon has left it enabled */
>> - if (efi_fb && !(earlycon_console->flags & CON_ENABLED))
>> - memunmap(efi_fb);
>> - return 0;
>> -}
>> -late_initcall(efi_earlycon_unmap_fb);
>> -
>> -static __ref void *efi_earlycon_map(unsigned long start, unsigned long len)
>> -{
>> - pgprot_t fb_prot;
>> -
>> - if (efi_fb)
>> - return efi_fb + start;
>> -
>> - fb_prot = fb_wb ? PAGE_KERNEL : pgprot_writecombine(PAGE_KERNEL);
>> - return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot));
>> -}
>> -
>> -static __ref void efi_earlycon_unmap(void *addr, unsigned long len)
>> -{
>> - if (efi_fb)
>> - return;
>> -
>> - early_memunmap(addr, len);
>> -}
>> -
>> -static void efi_earlycon_clear_scanline(unsigned int y)
>> -{
>> - unsigned long *dst;
>> - u16 len;
>> -
>> - len = screen_info.lfb_linelength;
>> - dst = efi_earlycon_map(y*len, len);
>> - if (!dst)
>> - return;
>> -
>> - memset(dst, 0, len);
>> - efi_earlycon_unmap(dst, len);
>> -}
>> -
>> -static void efi_earlycon_scroll_up(void)
>> -{
>> - unsigned long *dst, *src;
>> - u16 len;
>> - u32 i, height;
>> -
>> - len = screen_info.lfb_linelength;
>> - height = screen_info.lfb_height;
>> -
>> - for (i = 0; i < height - font->height; i++) {
>> - dst = efi_earlycon_map(i*len, len);
>> - if (!dst)
>> - return;
>> -
>> - src = efi_earlycon_map((i + font->height) * len, len);
>> - if (!src) {
>> - efi_earlycon_unmap(dst, len);
>> - return;
>> - }
>> -
>> - memmove(dst, src, len);
>> -
>> - efi_earlycon_unmap(src, len);
>> - efi_earlycon_unmap(dst, len);
>> - }
>> -}
>> -
>> -static void efi_earlycon_write_char(u32 *dst, unsigned char c, unsigned int h)
>> -{
>> - const u32 color_black = 0x00000000;
>> - const u32 color_white = 0x00ffffff;
>> - const u8 *src;
>> - int m, n, bytes;
>> - u8 x;
>> -
>> - bytes = BITS_TO_BYTES(font->width);
>> - src = font->data + c * font->height * bytes + h * bytes;
>> -
>> - for (m = 0; m < font->width; m++) {
>> - n = m % 8;
>> - x = *(src + m / 8);
>> - if ((x >> (7 - n)) & 1)
>> - *dst = color_white;
>> - else
>> - *dst = color_black;
>> - dst++;
>> - }
>> -}
>> -
>> -static void
>> -efi_earlycon_write(struct console *con, const char *str, unsigned int num)
>> -{
>> - struct screen_info *si;
>> - unsigned int len;
>> - const char *s;
>> - void *dst;
>> -
>> - si = &screen_info;
>> - len = si->lfb_linelength;
>> -
>> - while (num) {
>> - unsigned int linemax;
>> - unsigned int h, count = 0;
>> -
>> - for (s = str; *s && *s != '\n'; s++) {
>> - if (count == num)
>> - break;
>> - count++;
>> - }
>> -
>> - linemax = (si->lfb_width - efi_x) / font->width;
>> - if (count > linemax)
>> - count = linemax;
>> -
>> - for (h = 0; h < font->height; h++) {
>> - unsigned int n, x;
>> -
>> - dst = efi_earlycon_map((efi_y + h) * len, len);
>> - if (!dst)
>> - return;
>> -
>> - s = str;
>> - n = count;
>> - x = efi_x;
>> -
>> - while (n-- > 0) {
>> - efi_earlycon_write_char(dst + x*4, *s, h);
>> - x += font->width;
>> - s++;
>> - }
>> -
>> - efi_earlycon_unmap(dst, len);
>> - }
>> -
>> - num -= count;
>> - efi_x += count * font->width;
>> - str += count;
>> -
>> - if (num > 0 && *s == '\n') {
>> - efi_x = 0;
>> - efi_y += font->height;
>> - str++;
>> - num--;
>> - }
>> -
>> - if (efi_x + font->width > si->lfb_width) {
>> - efi_x = 0;
>> - efi_y += font->height;
>> - }
>> -
>> - if (efi_y + font->height > si->lfb_height) {
>> - u32 i;
>> -
>> - efi_y -= font->height;
>> - efi_earlycon_scroll_up();
>> -
>> - for (i = 0; i < font->height; i++)
>> - efi_earlycon_clear_scanline(efi_y + i);
>> - }
>> - }
>> -}
>> -
>> -static int __init efi_earlycon_setup(struct earlycon_device *device,
>> - const char *opt)
>> -{
>> - struct screen_info *si;
>> - u16 xres, yres;
>> - u32 i;
>> -
>> - if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
>> - return -ENODEV;
>> -
>> - fb_base = screen_info.lfb_base;
>> - if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
>> - fb_base |= (u64)screen_info.ext_lfb_base << 32;
>> -
>> - fb_wb = opt && !strcmp(opt, "ram");
>> -
>> - si = &screen_info;
>> - xres = si->lfb_width;
>> - yres = si->lfb_height;
>> -
>> - /*
>> - * efi_earlycon_write_char() implicitly assumes a framebuffer with
>> - * 32 bits per pixel.
>> - */
>> - if (si->lfb_depth != 32)
>> - return -ENODEV;
>> -
>> - font = get_default_font(xres, yres, -1, -1);
>> - if (!font)
>> - return -ENODEV;
>> -
>> - efi_y = rounddown(yres, font->height) - font->height;
>> - for (i = 0; i < (yres - efi_y) / font->height; i++)
>> - efi_earlycon_scroll_up();
>> -
>> - device->con->write = efi_earlycon_write;
>> - earlycon_console = device->con;
>> - return 0;
>> -}
>> -EARLYCON_DECLARE(efifb, efi_earlycon_setup);
>> diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
>> index 40c50fa2dd70c33a1549141b15e6cba721352d2d..8052507e058fce37f5a51058e58ae2eb10d9669a 100644
>> --- a/drivers/video/console/Kconfig
>> +++ b/drivers/video/console/Kconfig
>> @@ -69,6 +69,17 @@ config DUMMY_CONSOLE_ROWS
>> monitor.
>> Select 25 if you use a 640x480 resolution by default.
>>
>> +config FB_EARLYCON
>> + bool "Generic framebuffer early console"
>> + depends on SERIAL_EARLYCON && !ARM && !IA64
>> + select FONT_SUPPORT
>> + select ARCH_USE_MEMREMAP_PROT
>> + help
>> + Say Y here if you want early console support for firmware established
>> + linear framebuffer. Unless you are using EFI framebuffer, you need to
>> + specify framebuffer geometry and address in device-tree or in kernel
>> + command line.
>> +
>> config FRAMEBUFFER_CONSOLE
>> bool "Framebuffer Console support"
>> depends on FB && !UML
>> diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
>> index db07b784bd2ccdcbffde933926ed5cee2bbbc7d4..7818faee587fc9c40b429617cfa224c0ccbc557c 100644
>> --- a/drivers/video/console/Makefile
>> +++ b/drivers/video/console/Makefile
>> @@ -9,4 +9,5 @@ obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o
>> obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
>> obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
>>
>> +obj-$(CONFIG_FB_EARLYCON) += earlycon.o
>> obj-$(CONFIG_FB_STI) += sticore.o
>> diff --git a/drivers/video/console/earlycon.c b/drivers/video/console/earlycon.c
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..54436587e3db90034652dcc144669dca91b863d5
>> --- /dev/null
>> +++ b/drivers/video/console/earlycon.c
>> @@ -0,0 +1,305 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2013 Intel Corporation; author Matt Fleming
>> + * Copyright (C) 2022 Markuss Broks <markuss.broks@gmail.com>
>> + */
>> +
>> +#include <asm/early_ioremap.h>
>> +#include <linux/console.h>
>> +#include <linux/efi.h>
>> +#include <linux/font.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mm.h>
>> +#include <linux/of.h>
>> +#include <linux/of_fdt.h>
>> +#include <linux/serial_core.h>
>> +#include <linux/screen_info.h>
>> +
>> +struct fb_earlycon {
>> + u32 x, y, curr_x, curr_y, depth, stride;
>> + size_t size;
>> + phys_addr_t phys_base;
>> + void __iomem *virt_base;
>> +};
>> +
>> +static const struct console *earlycon_console __initconst;
>> +static struct fb_earlycon info;
>> +static const struct font_desc *font;
>> +
>> +static int __init simplefb_earlycon_remap_fb(void)
>> +{
>> + unsigned long mapping;
>> + /* bail if there is no bootconsole or it has been disabled already */
>> + if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
>> + return 0;
>> +
>> + if (region_intersects(info.phys_base, info.size,
>> + IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE) == REGION_INTERSECTS)
>> + mapping = MEMREMAP_WB;
>> + else
>> + mapping = MEMREMAP_WC;
>> +
>> + info.virt_base = memremap(info.phys_base, info.size, mapping);
>> +
>> + return info.virt_base ? 0 : -ENOMEM;
>> +}
>> +early_initcall(simplefb_earlycon_remap_fb);
>> +
>> +static int __init simplefb_earlycon_unmap_fb(void)
>> +{
>> + /* unmap the bootconsole fb unless keep_bootcon has left it enabled */
>> + if (info.virt_base && !(earlycon_console->flags & CON_ENABLED))
>> + memunmap(info.virt_base);
>> + return 0;
>> +}
>> +late_initcall(simplefb_earlycon_unmap_fb);
>> +
>> +static __ref void *simplefb_earlycon_map(unsigned long start, unsigned long len)
>> +{
>> + pgprot_t fb_prot;
>> +
>> + if (info.virt_base)
>> + return info.virt_base + start;
>> +
>> + fb_prot = PAGE_KERNEL;
>> + return early_memremap_prot(info.phys_base + start, len, pgprot_val(fb_prot));
>> +}
>> +
>> +static __ref void simplefb_earlycon_unmap(void *addr, unsigned long len)
>> +{
>> + if (info.virt_base)
>> + return;
>> +
>> + early_memunmap(addr, len);
>> +}
>> +
>> +static void simplefb_earlycon_clear_scanline(unsigned int y)
>> +{
>> + unsigned long *dst;
>> + u16 len;
>> +
>> + len = info.stride;
>> + dst = simplefb_earlycon_map(y * len, len);
>> + if (!dst)
>> + return;
>> +
>> + memset(dst, 0, len);
>> + simplefb_earlycon_unmap(dst, len);
>> +}
>> +
>> +static void simplefb_earlycon_scroll_up(void)
>> +{
>> + unsigned long *dst, *src;
>> + u16 len;
>> + u32 i, height;
>> +
>> + len = info.stride;
>> + height = info.y;
>> +
>> + for (i = 0; i < height - font->height; i++) {
>> + dst = simplefb_earlycon_map(i * len, len);
>> + if (!dst)
>> + return;
>> +
>> + src = simplefb_earlycon_map((i + font->height) * len, len);
>> + if (!src) {
>> + simplefb_earlycon_unmap(dst, len);
>> + return;
>> + }
>> +
>> + memmove(dst, src, len);
>> +
>> + simplefb_earlycon_unmap(src, len);
>> + simplefb_earlycon_unmap(dst, len);
>> + }
>> +}
>> +
>> +static void simplefb_earlycon_write_char(u8 *dst, unsigned char c, unsigned int h)
>> +{
>> + const u8 *src;
>> + int m, n, bytes;
>> + u8 x;
>> +
>> + bytes = BITS_TO_BYTES(font->width);
>> + src = font->data + c * font->height * bytes + h * bytes;
>> +
>> + for (m = 0; m < font->width; m++) {
>> + n = m % 8;
>> + x = *(src + m / 8);
>> + if ((x >> (7 - n)) & 1)
>> + memset(dst, 0xff, (info.depth / 8));
>> + else
>> + memset(dst, 0, (info.depth / 8));
>> + dst += (info.depth / 8);
>> + }
>> +}
>> +
>> +static void
>> +simplefb_earlycon_write(struct console *con, const char *str, unsigned int num)
>> +{
>> + unsigned int len;
>> + const char *s;
>> + void *dst;
>> +
>> + len = info.stride;
>> +
>> + while (num) {
>> + unsigned int linemax;
>> + unsigned int h, count = 0;
>> +
>> + for (s = str; *s && *s != '\n'; s++) {
>> + if (count == num)
>> + break;
>> + count++;
>> + }
>> +
>> + linemax = (info.x - info.curr_x) / font->width;
>> + if (count > linemax)
>> + count = linemax;
>> +
>> + for (h = 0; h < font->height; h++) {
>> + unsigned int n, x;
>> +
>> + dst = simplefb_earlycon_map((info.curr_y + h) * len, len);
>> + if (!dst)
>> + return;
>> +
>> + s = str;
>> + n = count;
>> + x = info.curr_x;
>> +
>> + while (n-- > 0) {
>> + simplefb_earlycon_write_char(dst + (x * 4), *s, h);
>> + x += font->width;
>> + s++;
>> + }
>> +
>> + simplefb_earlycon_unmap(dst, len);
>> + }
>> +
>> + num -= count;
>> + info.curr_x += count * font->width;
>> + str += count;
>> +
>> + if (num > 0 && *s == '\n') {
>> + info.curr_x = 0;
>> + info.curr_y += font->height;
>> + str++;
>> + num--;
>> + }
>> +
>> + if (info.curr_x + font->width > info.x) {
>> + info.curr_x = 0;
>> + info.curr_y += font->height;
>> + }
>> +
>> + if (info.curr_y + font->height > info.y) {
>> + u32 i;
>> +
>> + info.curr_y -= font->height;
>> + simplefb_earlycon_scroll_up();
>> +
>> + for (i = 0; i < font->height; i++)
>> + simplefb_earlycon_clear_scanline(info.curr_y + i);
>> + }
>> + }
>> +}
>> +
>> +static int __init simplefb_earlycon_setup_common(struct earlycon_device *device,
>> + const char *opt)
>> +{
>> + int i;
>> +
>> + info.size = info.x * info.y * (info.depth / 8);
>> +
>> + font = get_default_font(info.x, info.y, -1, -1);
>> + if (!font)
>> + return -ENODEV;
>> +
>> + info.curr_y = rounddown(info.y, font->height) - font->height;
>> + for (i = 0; i < (info.y - info.curr_y) / font->height; i++)
>> + simplefb_earlycon_scroll_up();
>> +
>> + device->con->write = simplefb_earlycon_write;
>> + earlycon_console = device->con;
>> + return 0;
>> +}
>> +
>> +static int __init simplefb_earlycon_setup(struct earlycon_device *device,
>> + const char *opt)
>> +{
>> + struct uart_port *port = &device->port;
>> + int ret;
>> +
>> + if (!port->mapbase)
>> + return -ENODEV;
>> +
>> + info.phys_base = port->mapbase;
>> +
>> + ret = sscanf(device->options, "%ux%ux%u", &info.x, &info.y, &info.depth);
>> + if (ret != 3)
>> + return -ENODEV;
>> +
>> + info.stride = info.x * (info.depth / 8);
>> +
>> + return simplefb_earlycon_setup_common(device, opt);
>> +}
>> +
>> +EARLYCON_DECLARE(simplefb, simplefb_earlycon_setup);
>> +
>> +#ifdef CONFIG_EFI_EARLYCON
>> +static int __init simplefb_earlycon_setup_efi(struct earlycon_device *device,
>> + const char *opt)
>> +{
>> + if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
>> + return -ENODEV;
>> +
>> + info.phys_base = screen_info.lfb_base;
>> + if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
>> + info.phys_base |= (u64)screen_info.ext_lfb_base << 32;
>> +
>> + info.x = screen_info.lfb_width;
>> + info.y = screen_info.lfb_height;
>> + info.depth = screen_info.lfb_depth;
>> + info.stride = screen_info.lfb_linelength;
>> +
>> + return simplefb_earlycon_setup_common(device, opt);
>> +}
>> +
>> +EARLYCON_DECLARE(efifb, simplefb_earlycon_setup_efi);
>> +#endif
>> +
>> +#ifdef CONFIG_OF_EARLY_FLATTREE
>> +static int __init simplefb_earlycon_setup_of(struct earlycon_device *device,
>> + const char *opt)
>> +{
>> + struct uart_port *port = &device->port;
>> + const __be32 *val;
>> +
>> + if (!port->mapbase)
>> + return -ENODEV;
>> +
>> + info.phys_base = port->mapbase;
>> +
>> + val = of_get_flat_dt_prop(device->offset, "width", NULL);
>> + if (!val)
>> + return -ENODEV;
>> + info.x = be32_to_cpu(*val);
>> +
>> + val = of_get_flat_dt_prop(device->offset, "height", NULL);
>> + if (!val)
>> + return -ENODEV;
>> + info.y = be32_to_cpu(*val);
>> +
>> + val = of_get_flat_dt_prop(device->offset, "stride", NULL);
>> + if (!val)
>> + return -ENODEV;
>> + info.stride = be32_to_cpu(*val);
>> + info.depth = (info.stride / info.x) * 8;
>> +
>> + return simplefb_earlycon_setup_common(device, opt);
>> +}
>> +
>> +OF_EARLYCON_DECLARE(simplefb, "simple-framebuffer", simplefb_earlycon_setup_of);
>> +#endif
>> --
>> 2.37.0
>>
>

--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-09-07 08:55    [W:0.102 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site