lkml.org 
[lkml]   [2022]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 12/12] Documentation/x86: Update resctrl_ui.rst for new features
From
On 9/28/22 22:23, Moger, Babu wrote:
>> Hi Babu,
>>
>> The description text for each snippets above shouldn't in the code
>> block. Also, split the block into three code blocks in the lists:
> Did you mean, I need to remove similar texts from code?

I mean extracting code description from the code block, see the diff below.

>>
>> ---- >8 ----
>> diff --git a/Documentation/x86/resctrl.rst b/Documentation/x86/resctrl.rst
>> index b4fe54f219b6f3..ec578b069276ce 100644
>> --- a/Documentation/x86/resctrl.rst
>> +++ b/Documentation/x86/resctrl.rst
>> @@ -206,25 +206,26 @@ with the following files:
>> all the event types and the mbm_local_bytes configuration is set to
>> 0x15 to count all the local memory events.
>>
>> - Example::
>> + Examples:
>> +
>> + * To view the current configuration::
>>
>> - To view the current configuration, run the command.
>> # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
>> 0:0x7f;1:0x7f;2:0x7f;3:0x7f
>>
>> # cat /sys/fs/resctrl/info/L3_MON/mbm_local_config
>> 0:0x15;1:0x15;3:0x15;4:0x15
>>
>> - To change the mbm_total_bytes to count only reads on domain 0,
>> - run the command. The bits 0,1,4 and 5 needs to set.
>> + * To change the mbm_total_bytes to count only reads on domain 0
>> + (the bits 0, 1, 4 and 5 needs to be set)::
>>
>> # echo "0:0x33" > /sys/fs/resctrl/info/L3_MON/mbm_total_config
>>
>> # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
>> 0:0x33;1:0x7f;2:0x7f;3:0x7f
>>
>> - To change the mbm_local_bytes to count all the slow memory reads on
>> - domain 1, run the command. The bits 4 and 5 needs to set.
>> + * To change the mbm_local_bytes to count all the slow memory reads on
>> + domain 1 (the bits 4 and 5 needs to be set)::
>>
>> # echo "1:0x30" > /sys/fs/resctrl/info/L3_MON/mbm_local_config
>>
>
> Thanks for the diff. I cannot get this right for some reason. I will
> probably send the diff before the final series.
>
>

OK.

>>
>> Also, there isn't description of mapping from bits from the supported events
>> table to the bytes input for mbm_{total,local}_config.
>
> It is already there. Is that not clear?

No. I don't see why setting bits 0, 1, 4, and 5 on domain 0 translates to
`0:0x33`, for example.

>>
>>> +Slow Memory b/w domain is L3 cache.
>>> +::
>>> +
>>> + SMBA:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
>>> +
>> What b/w stands for in the context above?
> b/w is bandwidth. I will correct it.

OK.

Thanks for replying.

--
An old man doll... just what I always wanted! - Clara

\
 
 \ /
  Last update: 2022-09-29 10:48    [W:1.860 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site