lkml.org 
[lkml]   [2022]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/5] remoteproc: qcom: qcom_wcnss: Add support for pronto-v3
Date
From: Vladimir Lypak <vladimir.lypak@gmail.com>

Pronto-v3 is similar to pronto-v2. It requires two power domains, and it
requires the xo clock. It is used on the MSM8953 platform.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
drivers/remoteproc/qcom_wcnss.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 68f37296b151..ff18bfae5eb6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -141,6 +141,18 @@ static const struct wcnss_data pronto_v2_data = {
.num_vregs = 1,
};

+static const struct wcnss_data pronto_v3_data = {
+ .pmu_offset = 0x1004,
+ .spare_offset = 0x1088,
+
+ .pd_names = { "mx", "cx" },
+ .vregs = (struct wcnss_vreg_info[]) {
+ { "vddpx", 1800000, 1800000, 0 },
+ },
+ .num_pd_vregs = 2,
+ .num_vregs = 1,
+};
+
static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -675,6 +687,7 @@ static const struct of_device_id wcnss_of_match[] = {
{ .compatible = "qcom,riva-pil", &riva_data },
{ .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
{ .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
+ { .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
{ },
};
MODULE_DEVICE_TABLE(of, wcnss_of_match);
--
2.37.3
\
 
 \ /
  Last update: 2022-09-29 07:03    [W:0.154 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site