lkml.org 
[lkml]   [2022]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: exynos: fix polarity of VBUS GPIO
Date
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.

Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
arch/arm/boot/dts/exynos4412-origen.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 6db09dba07ff..a3905e27b9cd 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -95,7 +95,7 @@ &exynos_usbphy {
};

&ehci {
- samsung,vbus-gpio = <&gpx3 5 1>;
+ samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
status = "okay";
phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
phy-names = "hsic0", "hsic1";
--
2.38.0.rc1.362.ged0d419d3c-goog
\
 
 \ /
  Last update: 2022-09-28 00:05    [W:0.097 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site