lkml.org 
[lkml]   [2022]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] PCI: Add standard PCI Config Address macros
Date
Lot of PCI and PCIe controllers are using standard Config Address for PCI
Configuration Mechanism #1 (as defined in PCI Local Bus Specification) or
its extended version.

So introduce new macros PCI_CONF1_ADDRESS() and PCI_CONF1_EXT_ADDRESS() in
include file drivers/pci/pci.h which can be suitable for PCI and PCIe
controllers which uses this type of access to PCI config space.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
drivers/pci/pci.h | 45 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 785f31086313..88bd77107103 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -774,4 +774,49 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
}
#endif

+/*
+ * Config Address for PCI Configuration Mechanism #1
+ *
+ * See PCI Local Bus Specification, Revision 3.0,
+ * Section 3.2.2.3.2, Figure 3-2, p. 50.
+ */
+
+#define PCI_CONF1_BUS_SHIFT 16 /* Bus number */
+#define PCI_CONF1_DEV_SHIFT 11 /* Device number */
+#define PCI_CONF1_FUNC_SHIFT 8 /* Function number */
+
+#define PCI_CONF1_BUS_MASK 0xff
+#define PCI_CONF1_DEV_MASK 0x1f
+#define PCI_CONF1_FUNC_MASK 0x7
+#define PCI_CONF1_REG_MASK 0xfc /* Limit aligned offset to a maximum of 256B */
+
+#define PCI_CONF1_ENABLE BIT(31)
+#define PCI_CONF1_BUS(x) (((x) & PCI_CONF1_BUS_MASK) << PCI_CONF1_BUS_SHIFT)
+#define PCI_CONF1_DEV(x) (((x) & PCI_CONF1_DEV_MASK) << PCI_CONF1_DEV_SHIFT)
+#define PCI_CONF1_FUNC(x) (((x) & PCI_CONF1_FUNC_MASK) << PCI_CONF1_FUNC_SHIFT)
+#define PCI_CONF1_REG(x) ((x) & PCI_CONF1_REG_MASK)
+
+#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \
+ (PCI_CONF1_ENABLE | \
+ PCI_CONF1_BUS(bus) | \
+ PCI_CONF1_DEV(dev) | \
+ PCI_CONF1_FUNC(func) | \
+ PCI_CONF1_REG(reg))
+
+/*
+ * Extension of PCI Config Address for accessing extended PCIe registers
+ *
+ * No standardized specification, but used on lot of non-ECAM-compliant ARM SoCs
+ * or on AMD Barcelona and new CPUs. Reserved bits [27:24] of PCI Config Address
+ * are used for specifying additional 4 high bits of PCI Express register.
+ */
+
+#define PCI_CONF1_EXT_REG_SHIFT 16
+#define PCI_CONF1_EXT_REG_MASK 0xf00
+#define PCI_CONF1_EXT_REG(x) (((x) & PCI_CONF1_EXT_REG_MASK) << PCI_CONF1_EXT_REG_SHIFT)
+
+#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \
+ (PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
+ PCI_CONF1_EXT_REG(reg))
+
#endif /* DRIVERS_PCI_H */
--
2.20.1
\
 
 \ /
  Last update: 2022-09-24 11:24    [W:0.061 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site