lkml.org 
[lkml]   [2022]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 1/2] dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation
From
On 21/09/2022 11:50, Tomer Maimon wrote:
> Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX
> pinmux and GPIO controller.
>
> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> ---
> .../pinctrl/nuvoton,npcm845-pinctrl.yaml | 213 ++++++++++++++++++
> 1 file changed, 213 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> new file mode 100644
> index 000000000000..2e8bc9b22166
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> @@ -0,0 +1,213 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton NPCM845 Pin Controller and GPIO
> +
> +maintainers:
> + - Tomer Maimon <tmaimon77@gmail.com>
> +
> +description:
> + The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
> + the multiplexing block, Each pin supports GPIO functionality (GPIOx)
> + and multiple functions that directly connect the pin to different
> + hardware blocks.
> +
> +properties:
> + compatible:
> + const: nuvoton,npcm845-pinctrl
> +
> + ranges:
> + maxItems: 1
> +
> + '#address-cells':

Use consistent quotes - either ' or "

> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> + nuvoton,sysgcr:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: a phandle to access GCR registers.
> +
> +patternProperties:
> + "^gpio@":
> + type: object
> +
> + description:
> + Eight GPIO banks that each contain 32 GPIOs.
> +
> + properties:
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + required:
> + - gpio-controller
> + - '#gpio-cells'
> + - reg
> + - interrupts
> + - gpio-ranges
> +
> + "-mux":
> + $ref: pinmux-node.yaml#
> +
> + properties:
> + groups:
> + description:
> + One or more groups of pins to mux to a certain function
> + items:
> + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
> + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
> + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
> + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
> + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
> + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
> + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
> + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
> + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
> + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
> + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
> + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
> + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
> + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
> + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
> + hgpio4, hgpio5, hgpio6, hgpio7 ]
> +
> + function:
> + description:
> + The function that a group of pins is muxed to
> + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
> + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
> + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
> + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
> + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
> + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
> + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
> + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
> + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
> + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
> + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
> + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
> + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
> + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
> + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
> + hgpio4, hgpio5, hgpio6, hgpio7 ]
> +
> + dependencies:
> + groups: [ function ]
> + function: [ groups ]
> +
> + additionalProperties: false
> +
> + "^pin":
> + $ref: pincfg-node.yaml#
> +
> + properties:
> + pins:
> + description:
> + A list of pins to configure in certain ways, such as enabling
> + debouncing
> +
> + bias-disable: true
> +
> + bias-pull-up: true
> +
> + bias-pull-down: true
> +
> + input-enable: true
> +
> + output-low: true
> +
> + output-high: true
> +
> + drive-push-pull: true
> +
> + drive-open-drain: true
> +
> + input-debounce:
> + description:
> + Debouncing periods in microseconds, one period per interrupt
> + bank found in the controller
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 4
> +
> + slew-rate:
> + description: |
> + 0: Low rate
> + 1: High rate
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
> +
> + drive-strength:
> + enum: [ 0, 1, 2, 4, 8, 12 ]
> +
> + additionalProperties: false
> +
> +allOf:
> + - $ref: "pinctrl.yaml#"

Drop quotes.

> +
> +required:
> + - compatible
> + - ranges
> + - '#address-cells'
> + - '#size-cells'
> + - nuvoton,sysgcr

I don't think this solves any questions...


> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pinctrl: pinctrl@f0800000 {

gcr has @f0800000, hasn't it?

> + compatible = "nuvoton,npcm845-pinctrl";
> + ranges = <0x0 0x0 0xf0010000 0x8000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + nuvoton,sysgcr = <&gcr>;
> +
> + gpio0: gpio@f0010000 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x0 0xB0>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-ranges = <&pinctrl 0 0 32>;
> + };
> +
> + fanin0_pin: fanin0-mux {
> + groups = "fanin0";
> + function = "fanin0";
> + };
> +
> + pin34_slew: pin34-slew {
> + pins = "GPIO34/I3C4_SDA";
> + bias-disable;
> + };
> + };
> + };
> +

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-23 20:08    [W:0.060 / U:1.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site