lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/4] media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver
Hi Geert,

On Thu, Sep 22, 2022 at 1:51 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> On Thu, Sep 22, 2022 at 2:34 PM Sakari Ailus
> <sakari.ailus@linux.intel.com> wrote:
> > On Thu, Sep 22, 2022 at 01:08:33PM +0100, Lad, Prabhakar wrote:
> > > > > * Switched to manually turn ON/OFF the clocks instead of pm_runtime so that
> > > > > the mipi/dhpy initialization happens as per the HW manual
> > > >
> > > > That doesn't look right. The driver doesn't use runtime PM anymore, so
> > > > power domains may not be handled properly. What was the problem with
> > > > clock handling using runtime PM ?
> > > >
> > > If we use the runtime PM all the clocks will be turned ON when we call
> > > pm_runtime_resume_and_get() which I dont want to. As per the "Starting
> > > reception for MIPI CSI-2 Input" section 35.3.1 for example we first
> > > need to turn ON all the clocks and later further down the line we need
> > > to just turn OFF VCLK -> Enable Link -> turn ON VCLK. Due to such
> > > cases I have switched to individual clock handling.
> >
> > If that is the case, then you should control just that clock directly,
> > outside runtime PM callbacks.
> >
> > Runtime PM may be needed e.g. for resuming a parent device.
>
> Exactly.
> So probably you should not consider R9A07G044_CRU_VCLK a PM clock,
> i.e. you need changes to rzg2l_cpg_is_pm_clk() to exclude it.
>
Thanks for the pointer. In that case we will have to consider
R9A07G044_CRU_VCLK and R9A07G044_CRU_SYSCLK as not PM clocks.

Does the below sound good?
- DEF_NO_PM() macro
- bool is_pm_clk in struct rzg2l_mod_clk.

I still have to implement it, just wanted your opinion beforehand.

Cheers,
Prabhakar

\
 
 \ /
  Last update: 2022-09-22 15:28    [W:0.091 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site