lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/5] serial: 8250: Add rs485 emulation to 8250_dw
On Sun, May 17, 2020 at 11:56:05PM +0200, Heiko Stuebner wrote:
> This series tries to revive the work of Giulio Benetti from 2018 [0]
> which seemed to have stalled at that time.
>
> The board I needed that on also had the additional caveat that it
> uses non-standard pins for DE/RE so needed gpio mctrl layer as well
> and even more special needed to control the RE pin manually not as
> part of it being connected to the DE signal as seems to be the standard.
[...]
> Giulio Benetti (2):
> serial: 8250: Handle implementations not having TEMT interrupt using
> em485
> serial: 8250_dw: add em485 support
>
> Heiko Stuebner (3):
> serial: 8520_port: Fix function param documentation
> dt-bindings: serial: Add binding for rs485 receiver enable GPIO
> serial: 8250: Support separate rs485 rx-enable GPIO

ICYMI, patch [1/5] of this series got accepted back in the day
and patches [4/5] and [5/5] appeared in slightly modified form in v5.19
(commits b54f7a922d33 and 5ff33917faca).

So only patches [2/5] and [3/5] of this series would have to be
upstreamed in case you're still interested in pursuing them.
Note that a related DT property was introduced with 103dcf2ea2df.
Also note that you got some review comments on this series that
may still need to be addressed.

Just thought I'd let you know as I rediscovered this thread today
when flushing out old e-mails from my inbox.

Thanks,

Lukas

\
 
 \ /
  Last update: 2022-09-22 11:58    [W:0.573 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site