lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 4/4] net: lan966x: Add offload support for taprio
Date
Lan966x switch supports time-based egress shaping in hardware
according to IEEE 802.1Qbv. Add support for TAS configuration on
egress port of lan966x switch.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
.../net/ethernet/microchip/lan966x/Makefile | 2 +-
.../ethernet/microchip/lan966x/lan966x_main.c | 3 +
.../ethernet/microchip/lan966x/lan966x_main.h | 10 +
.../ethernet/microchip/lan966x/lan966x_port.c | 2 +
.../ethernet/microchip/lan966x/lan966x_ptp.c | 9 +-
.../microchip/lan966x/lan966x_taprio.c | 528 ++++++++++++++++++
.../ethernet/microchip/lan966x/lan966x_tc.c | 9 +
7 files changed, 560 insertions(+), 3 deletions(-)
create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_taprio.c

diff --git a/drivers/net/ethernet/microchip/lan966x/Makefile b/drivers/net/ethernet/microchip/lan966x/Makefile
index 2ea66b94abac9..cac8b3901eaef 100644
--- a/drivers/net/ethernet/microchip/lan966x/Makefile
+++ b/drivers/net/ethernet/microchip/lan966x/Makefile
@@ -9,4 +9,4 @@ lan966x-switch-objs := lan966x_main.o lan966x_phylink.o lan966x_port.o \
lan966x_mac.o lan966x_ethtool.o lan966x_switchdev.o \
lan966x_vlan.o lan966x_fdb.o lan966x_mdb.o \
lan966x_ptp.o lan966x_fdma.o lan966x_lag.o \
- lan966x_tc.o lan966x_mqprio.o
+ lan966x_tc.o lan966x_mqprio.o lan966x_taprio.o
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
index 033120a5b056c..b98d37c76edbc 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
@@ -963,6 +963,8 @@ static void lan966x_init(struct lan966x *lan966x)
lan966x, ANA_ANAINTR);

spin_lock_init(&lan966x->tx_lock);
+
+ lan966x_taprio_init(lan966x);
}

static int lan966x_ram_init(struct lan966x *lan966x)
@@ -1172,6 +1174,7 @@ static int lan966x_remove(struct platform_device *pdev)
{
struct lan966x *lan966x = platform_get_drvdata(pdev);

+ lan966x_taprio_deinit(lan966x);
lan966x_fdma_deinit(lan966x);
lan966x_cleanup_ports(lan966x);

diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.h b/drivers/net/ethernet/microchip/lan966x/lan966x_main.h
index b037b1feec8f3..935c116715939 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.h
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.h
@@ -9,6 +9,7 @@
#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/ptp_clock_kernel.h>
+#include <net/pkt_sched.h>
#include <net/switchdev.h>

#include "lan966x_regs.h"
@@ -410,6 +411,8 @@ void lan966x_ptp_txtstamp_release(struct lan966x_port *port,
struct sk_buff *skb);
irqreturn_t lan966x_ptp_irq_handler(int irq, void *args);
irqreturn_t lan966x_ptp_ext_irq_handler(int irq, void *args);
+u32 lan966x_ptp_get_period_ps(void);
+int lan966x_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts);

int lan966x_fdma_xmit(struct sk_buff *skb, __be32 *ifh, struct net_device *dev);
int lan966x_fdma_change_mtu(struct lan966x *lan966x);
@@ -452,6 +455,13 @@ int lan966x_tc_setup(struct net_device *dev, enum tc_setup_type type,
int lan966x_mqprio_add(struct lan966x_port *port, u8 num_tc);
int lan966x_mqprio_del(struct lan966x_port *port);

+void lan966x_taprio_init(struct lan966x *lan966x);
+void lan966x_taprio_deinit(struct lan966x *lan966x);
+int lan966x_taprio_add(struct lan966x_port *port,
+ struct tc_taprio_qopt_offload *qopt);
+int lan966x_taprio_del(struct lan966x_port *port);
+int lan966x_taprio_speed_set(struct lan966x_port *port, int speed);
+
static inline void __iomem *lan_addr(void __iomem *base[],
int id, int tinst, int tcnt,
int gbase, int ginst,
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_port.c b/drivers/net/ethernet/microchip/lan966x/lan966x_port.c
index 702542fa0902d..0050fcb988b75 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_port.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_port.c
@@ -165,6 +165,8 @@ static void lan966x_port_link_up(struct lan966x_port *port)
break;
}

+ lan966x_taprio_speed_set(port, config->speed);
+
/* Also the GIGA_MODE_ENA(1) needs to be set regardless of the
* port speed for QSGMII ports.
*/
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c b/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c
index 3a621c5165bc5..e5a2bbe064f8f 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c
@@ -464,8 +464,7 @@ static int lan966x_ptp_settime64(struct ptp_clock_info *ptp,
return 0;
}

-static int lan966x_ptp_gettime64(struct ptp_clock_info *ptp,
- struct timespec64 *ts)
+int lan966x_ptp_gettime64(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
struct lan966x_phc *phc = container_of(ptp, struct lan966x_phc, info);
struct lan966x *lan966x = phc->lan966x;
@@ -890,3 +889,9 @@ void lan966x_ptp_rxtstamp(struct lan966x *lan966x, struct sk_buff *skb,
shhwtstamps = skb_hwtstamps(skb);
shhwtstamps->hwtstamp = full_ts_in_ns;
}
+
+u32 lan966x_ptp_get_period_ps(void)
+{
+ /* This represents the system clock period in picoseconds */
+ return 15125;
+}
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_taprio.c b/drivers/net/ethernet/microchip/lan966x/lan966x_taprio.c
new file mode 100644
index 0000000000000..3f5b212066c5c
--- /dev/null
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_taprio.c
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "lan966x_main.h"
+
+#define LAN966X_TAPRIO_TIMEOUT_MS 1000
+#define LAN966X_TAPRIO_ENTRIES_PER_PORT 2
+
+/* Minimum supported cycle time in nanoseconds */
+#define LAN966X_TAPRIO_MIN_CYCLE_TIME_NS NSEC_PER_USEC
+
+/* Maximum supported cycle time in nanoseconds */
+#define LAN966X_TAPRIO_MAX_CYCLE_TIME_NS (NSEC_PER_SEC - 1)
+
+/* Total number of TAS GCL entries */
+#define LAN966X_TAPRIO_NUM_GCL 256
+
+/* TAPRIO link speeds for calculation of guard band */
+enum lan966x_taprio_link_speed {
+ LAN966X_TAPRIO_SPEED_NO_GB,
+ LAN966X_TAPRIO_SPEED_10,
+ LAN966X_TAPRIO_SPEED_100,
+ LAN966X_TAPRIO_SPEED_1000,
+ LAN966X_TAPRIO_SPEED_2500,
+};
+
+/* TAPRIO list states */
+enum lan966x_taprio_state {
+ LAN966X_TAPRIO_STATE_ADMIN,
+ LAN966X_TAPRIO_STATE_ADVANCING,
+ LAN966X_TAPRIO_STATE_PENDING,
+ LAN966X_TAPRIO_STATE_OPERATING,
+ LAN966X_TAPRIO_STATE_TERMINATING,
+ LAN966X_TAPRIO_STATE_MAX,
+};
+
+/* TAPRIO GCL command */
+enum lan966x_taprio_gcl_cmd {
+ LAN966X_TAPRIO_GCL_CMD_SET_GATE_STATES = 0,
+};
+
+static u32 lan966x_taprio_list_index(struct lan966x_port *port, u8 entry)
+{
+ return port->chip_port * LAN966X_TAPRIO_ENTRIES_PER_PORT + entry;
+}
+
+static u32 lan966x_taprio_list_state_get(struct lan966x_port *port)
+{
+ struct lan966x *lan966x = port->lan966x;
+ u32 val;
+
+ val = lan_rd(lan966x, QSYS_TAS_LST);
+ return QSYS_TAS_LST_LIST_STATE_GET(val);
+}
+
+static u32 lan966x_taprio_list_index_state_get(struct lan966x_port *port,
+ u32 list)
+{
+ struct lan966x *lan966x = port->lan966x;
+
+ lan_rmw(QSYS_TAS_CFG_CTRL_LIST_NUM_SET(list),
+ QSYS_TAS_CFG_CTRL_LIST_NUM,
+ lan966x, QSYS_TAS_CFG_CTRL);
+
+ return lan966x_taprio_list_state_get(port);
+}
+
+static void lan966x_taprio_list_state_set(struct lan966x_port *port,
+ u32 state)
+{
+ struct lan966x *lan966x = port->lan966x;
+
+ lan_rmw(QSYS_TAS_LST_LIST_STATE_SET(state),
+ QSYS_TAS_LST_LIST_STATE,
+ lan966x, QSYS_TAS_LST);
+}
+
+static int lan966x_taprio_list_shutdown(struct lan966x_port *port,
+ u32 list)
+{
+ struct lan966x *lan966x = port->lan966x;
+ bool pending, operating;
+ unsigned long end;
+ u32 state;
+
+ end = jiffies + msecs_to_jiffies(LAN966X_TAPRIO_TIMEOUT_MS);
+ /* It is required to try multiple times to set the state of list,
+ * because the HW can overwrite this.
+ */
+ do {
+ state = lan966x_taprio_list_state_get(port);
+
+ pending = false;
+ operating = false;
+
+ if (state == LAN966X_TAPRIO_STATE_ADVANCING ||
+ state == LAN966X_TAPRIO_STATE_PENDING) {
+ lan966x_taprio_list_state_set(port,
+ LAN966X_TAPRIO_STATE_ADMIN);
+ pending = true;
+ }
+
+ if (state == LAN966X_TAPRIO_STATE_OPERATING) {
+ lan966x_taprio_list_state_set(port,
+ LAN966X_TAPRIO_STATE_TERMINATING);
+ operating = true;
+ }
+
+ /* If the entry was in pending and now gets in admin, then there
+ * is nothing else to do, so just bail out
+ */
+ state = lan966x_taprio_list_state_get(port);
+ if (pending &&
+ state == LAN966X_TAPRIO_STATE_ADMIN)
+ return 0;
+
+ /* If the list was in operating and now is in terminating or
+ * admin, then is OK to exit but it needs to wait until the list
+ * will get in admin. It is not required to set the state
+ * again.
+ */
+ if (operating &&
+ (state == LAN966X_TAPRIO_STATE_TERMINATING ||
+ state == LAN966X_TAPRIO_STATE_ADMIN))
+ break;
+
+ } while (!time_after(jiffies, end));
+
+ end = jiffies + msecs_to_jiffies(LAN966X_TAPRIO_TIMEOUT_MS);
+ do {
+ state = lan966x_taprio_list_state_get(port);
+ if (state == LAN966X_TAPRIO_STATE_ADMIN)
+ break;
+
+ } while (!time_after(jiffies, end));
+
+ /* If the list was in operating mode, it could be stopped while some
+ * queues where closed, so make sure to restore "all-queues-open"
+ */
+ if (operating) {
+ lan_wr(QSYS_TAS_GS_CTRL_HSCH_POS_SET(port->chip_port),
+ lan966x, QSYS_TAS_GS_CTRL);
+
+ lan_wr(QSYS_TAS_GATE_STATE_TAS_GATE_STATE_SET(0xff),
+ lan966x, QSYS_TAS_GATE_STATE);
+ }
+
+ return 0;
+}
+
+static int lan966x_taprio_shutdown(struct lan966x_port *port)
+{
+ u32 i, list, state;
+ int err;
+
+ for (i = 0; i < LAN966X_TAPRIO_ENTRIES_PER_PORT; ++i) {
+ list = lan966x_taprio_list_index(port, i);
+ state = lan966x_taprio_list_index_state_get(port, list);
+ if (state == LAN966X_TAPRIO_STATE_ADMIN)
+ continue;
+
+ err = lan966x_taprio_list_shutdown(port, list);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/* Find a suitable list for a new schedule. First priority is a list in state
+ * pending. Second priority is a list in state admin.
+ */
+static int lan966x_taprio_find_list(struct lan966x_port *port,
+ struct tc_taprio_qopt_offload *qopt,
+ int *new_list, int *obs_list)
+{
+ int state[LAN966X_TAPRIO_ENTRIES_PER_PORT];
+ int list[LAN966X_TAPRIO_ENTRIES_PER_PORT];
+ int err, oper = -1;
+ u32 i;
+
+ *new_list = -1;
+ *obs_list = -1;
+
+ /* If there is already an entry in operating mode, return this list in
+ * obs_list, such that when the new list will get activated the
+ * operating list will be stopped. In this way is possible to have
+ * smooth transitions between the lists
+ */
+ for (i = 0; i < LAN966X_TAPRIO_ENTRIES_PER_PORT; ++i) {
+ list[i] = lan966x_taprio_list_index(port, i);
+ state[i] = lan966x_taprio_list_index_state_get(port, list[i]);
+ if (state[i] == LAN966X_TAPRIO_STATE_OPERATING)
+ oper = list[i];
+ }
+
+ for (i = 0; i < LAN966X_TAPRIO_ENTRIES_PER_PORT; ++i) {
+ if (state[i] == LAN966X_TAPRIO_STATE_PENDING) {
+ err = lan966x_taprio_shutdown(port);
+ if (err)
+ return err;
+
+ *new_list = list[i];
+ *obs_list = (oper == -1) ? *new_list : oper;
+ return 0;
+ }
+ }
+
+ for (i = 0; i < LAN966X_TAPRIO_ENTRIES_PER_PORT; ++i) {
+ if (state[i] == LAN966X_TAPRIO_STATE_ADMIN) {
+ *new_list = list[i];
+ *obs_list = (oper == -1) ? *new_list : oper;
+ return 0;
+ }
+ }
+
+ return -ENOSPC;
+}
+
+static int lan966x_taprio_check(struct tc_taprio_qopt_offload *qopt)
+{
+ u64 total_time = 0;
+ u32 i;
+
+ /* This is not supported by th HW */
+ if (qopt->cycle_time_extension)
+ return -EOPNOTSUPP;
+
+ /* There is a limited number of gcl entries that can be used, they are
+ * shared by all ports
+ */
+ if (qopt->num_entries > LAN966X_TAPRIO_NUM_GCL)
+ return -EINVAL;
+
+ /* Don't allow cycle times bigger than 1 sec or smaller than 1 usec */
+ if (qopt->cycle_time < LAN966X_TAPRIO_MIN_CYCLE_TIME_NS ||
+ qopt->cycle_time > LAN966X_TAPRIO_MAX_CYCLE_TIME_NS)
+ return -EINVAL;
+
+ for (i = 0; i < qopt->num_entries; ++i) {
+ struct tc_taprio_sched_entry *entry = &qopt->entries[i];
+
+ /* Don't allow intervals bigger than 1 sec or smaller than 1
+ * usec
+ */
+ if (entry->interval < LAN966X_TAPRIO_MIN_CYCLE_TIME_NS ||
+ entry->interval > LAN966X_TAPRIO_MAX_CYCLE_TIME_NS)
+ return -EINVAL;
+
+ if (qopt->entries[i].command != TC_TAPRIO_CMD_SET_GATES)
+ return -EINVAL;
+
+ total_time += qopt->entries[i].interval;
+ }
+
+ /* Don't allow the total time of intervals be bigger than 1 sec */
+ if (total_time > LAN966X_TAPRIO_MAX_CYCLE_TIME_NS)
+ return -EINVAL;
+
+ /* The HW expects that the cycle time to be at least as big as sum of
+ * each interval of gcl
+ */
+ if (qopt->cycle_time < total_time)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int lan966x_taprio_gcl_free_get(struct lan966x_port *port,
+ unsigned long *free_list)
+{
+ struct lan966x *lan966x = port->lan966x;
+ u32 num_free, state, list;
+ u32 base, next, max_list;
+
+ /* By default everything is free */
+ bitmap_fill(free_list, LAN966X_TAPRIO_NUM_GCL);
+ num_free = LAN966X_TAPRIO_NUM_GCL;
+
+ /* Iterate over all gcl entries and find out which are free. And mark
+ * those that are not free.
+ */
+ max_list = lan966x->num_phys_ports * LAN966X_TAPRIO_ENTRIES_PER_PORT;
+ for (list = 0; list < max_list; ++list) {
+ state = lan966x_taprio_list_index_state_get(port, list);
+ if (state == LAN966X_TAPRIO_STATE_ADMIN)
+ continue;
+
+ base = lan_rd(lan966x, QSYS_TAS_LIST_CFG);
+ base = QSYS_TAS_LIST_CFG_LIST_BASE_ADDR_GET(base);
+ next = base;
+
+ do {
+ clear_bit(next, free_list);
+ num_free--;
+
+ lan_rmw(QSYS_TAS_CFG_CTRL_GCL_ENTRY_NUM_SET(next),
+ QSYS_TAS_CFG_CTRL_GCL_ENTRY_NUM,
+ lan966x, QSYS_TAS_CFG_CTRL);
+
+ next = lan_rd(lan966x, QSYS_TAS_GCL_CT_CFG2);
+ next = QSYS_TAS_GCL_CT_CFG2_NEXT_GCL_GET(next);
+ } while (base != next);
+ }
+
+ return num_free;
+}
+
+static void lan966x_taprio_gcl_setup_entry(struct lan966x_port *port,
+ struct tc_taprio_sched_entry *entry,
+ u32 next_entry)
+{
+ struct lan966x *lan966x = port->lan966x;
+
+ /* Setup a single gcl entry */
+ lan_wr(QSYS_TAS_GCL_CT_CFG_GATE_STATE_SET(entry->gate_mask) |
+ QSYS_TAS_GCL_CT_CFG_HSCH_POS_SET(port->chip_port) |
+ QSYS_TAS_GCL_CT_CFG_OP_TYPE_SET(LAN966X_TAPRIO_GCL_CMD_SET_GATE_STATES),
+ lan966x, QSYS_TAS_GCL_CT_CFG);
+
+ lan_wr(QSYS_TAS_GCL_CT_CFG2_PORT_PROFILE_SET(port->chip_port) |
+ QSYS_TAS_GCL_CT_CFG2_NEXT_GCL_SET(next_entry),
+ lan966x, QSYS_TAS_GCL_CT_CFG2);
+
+ lan_wr(entry->interval, lan966x, QSYS_TAS_GCL_TM_CFG);
+}
+
+static int lan966x_taprio_gcl_setup(struct lan966x_port *port,
+ struct tc_taprio_qopt_offload *qopt,
+ int list)
+{
+ DECLARE_BITMAP(free_list, LAN966X_TAPRIO_NUM_GCL);
+ struct lan966x *lan966x = port->lan966x;
+ u32 i, base, next;
+
+ if (lan966x_taprio_gcl_free_get(port, free_list) < qopt->num_entries)
+ return -ENOSPC;
+
+ /* Select list */
+ lan_rmw(QSYS_TAS_CFG_CTRL_LIST_NUM_SET(list),
+ QSYS_TAS_CFG_CTRL_LIST_NUM,
+ lan966x, QSYS_TAS_CFG_CTRL);
+
+ /* Setup the address of the first gcl entry */
+ base = find_first_bit(free_list, LAN966X_TAPRIO_NUM_GCL);
+ lan_rmw(QSYS_TAS_LIST_CFG_LIST_BASE_ADDR_SET(base),
+ QSYS_TAS_LIST_CFG_LIST_BASE_ADDR,
+ lan966x, QSYS_TAS_LIST_CFG);
+
+ /* Iterate over entries and add them to the gcl list */
+ next = base;
+ for (i = 0; i < qopt->num_entries; ++i) {
+ lan_rmw(QSYS_TAS_CFG_CTRL_GCL_ENTRY_NUM_SET(next),
+ QSYS_TAS_CFG_CTRL_GCL_ENTRY_NUM,
+ lan966x, QSYS_TAS_CFG_CTRL);
+
+ /* If the entry is last, point back to the start of the list */
+ if (i == qopt->num_entries - 1)
+ next = base;
+ else
+ next = find_next_bit(free_list, LAN966X_TAPRIO_NUM_GCL,
+ next + 1);
+
+ lan966x_taprio_gcl_setup_entry(port, &qopt->entries[i], next);
+ }
+
+ return 0;
+}
+
+/* Calculate new base_time based on cycle_time. The HW recommends to have the
+ * new base time at least 2 * cycle type + current time
+ */
+static void lan966x_taprio_new_base_time(struct lan966x *lan966x,
+ const u32 cycle_time,
+ const ktime_t org_base_time,
+ ktime_t *new_base_time)
+{
+ ktime_t current_time, threshold_time;
+ struct timespec64 ts;
+
+ /* Get the current time and calculate the threshold_time */
+ lan966x_ptp_gettime64(&lan966x->phc[LAN966X_PHC_PORT].info, &ts);
+ current_time = timespec64_to_ktime(ts);
+ threshold_time = current_time + (2 * cycle_time);
+
+ /* If the org_base_time is in enough in future just use it */
+ if (org_base_time >= threshold_time) {
+ *new_base_time = org_base_time;
+ return;
+ }
+
+ /* If the org_base_time is smaller than current_time, calculate the new
+ * base time as following.
+ */
+ if (org_base_time <= current_time) {
+ u64 tmp = current_time - org_base_time;
+ u32 rem = 0;
+
+ if (tmp > cycle_time)
+ div_u64_rem(tmp, cycle_time, &rem);
+ rem = cycle_time - rem;
+ *new_base_time = threshold_time + rem;
+ return;
+ }
+
+ /* The only left place for org_base_time is between current_time and
+ * threshold_time. In this case the new_base_time is calculated like
+ * org_base_time + 2 * cycletime
+ */
+ *new_base_time = org_base_time + 2 * cycle_time;
+}
+
+int lan966x_taprio_speed_set(struct lan966x_port *port, int speed)
+{
+ struct lan966x *lan966x = port->lan966x;
+ u8 taprio_speed;
+
+ switch (speed) {
+ case SPEED_10:
+ taprio_speed = LAN966X_TAPRIO_SPEED_10;
+ break;
+ case SPEED_100:
+ taprio_speed = LAN966X_TAPRIO_SPEED_100;
+ break;
+ case SPEED_1000:
+ taprio_speed = LAN966X_TAPRIO_SPEED_1000;
+ break;
+ case SPEED_2500:
+ taprio_speed = LAN966X_TAPRIO_SPEED_2500;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ lan_rmw(QSYS_TAS_PROFILE_CFG_LINK_SPEED_SET(taprio_speed),
+ QSYS_TAS_PROFILE_CFG_LINK_SPEED,
+ lan966x, QSYS_TAS_PROFILE_CFG(port->chip_port));
+
+ return 0;
+}
+
+int lan966x_taprio_add(struct lan966x_port *port,
+ struct tc_taprio_qopt_offload *qopt)
+{
+ struct lan966x *lan966x = port->lan966x;
+ int err, new_list, obs_list;
+ struct timespec64 ts;
+ ktime_t base_time;
+
+ err = lan966x_taprio_check(qopt);
+ if (err)
+ return err;
+
+ err = lan966x_taprio_find_list(port, qopt, &new_list, &obs_list);
+ if (err)
+ return err;
+
+ err = lan966x_taprio_gcl_setup(port, qopt, new_list);
+ if (err)
+ return err;
+
+ lan966x_taprio_new_base_time(lan966x, qopt->cycle_time,
+ qopt->base_time, &base_time);
+
+ ts = ktime_to_timespec64(base_time);
+ lan_wr(QSYS_TAS_BT_NSEC_NSEC_SET(ts.tv_nsec),
+ lan966x, QSYS_TAS_BT_NSEC);
+
+ lan_wr(lower_32_bits(ts.tv_sec),
+ lan966x, QSYS_TAS_BT_SEC_LSB);
+
+ lan_wr(QSYS_TAS_BT_SEC_MSB_SEC_MSB_SET(upper_32_bits(ts.tv_sec)),
+ lan966x, QSYS_TAS_BT_SEC_MSB);
+
+ lan_wr(qopt->cycle_time, lan966x, QSYS_TAS_CT_CFG);
+
+ lan_rmw(QSYS_TAS_STARTUP_CFG_OBSOLETE_IDX_SET(obs_list),
+ QSYS_TAS_STARTUP_CFG_OBSOLETE_IDX,
+ lan966x, QSYS_TAS_STARTUP_CFG);
+
+ /* Start list processing */
+ lan_rmw(QSYS_TAS_LST_LIST_STATE_SET(LAN966X_TAPRIO_STATE_ADVANCING),
+ QSYS_TAS_LST_LIST_STATE,
+ lan966x, QSYS_TAS_LST);
+
+ return err;
+}
+
+int lan966x_taprio_del(struct lan966x_port *port)
+{
+ return lan966x_taprio_shutdown(port);
+}
+
+void lan966x_taprio_init(struct lan966x *lan966x)
+{
+ int num_taprio_lists;
+ int p;
+
+ lan_wr(QSYS_TAS_STM_CFG_REVISIT_DLY_SET((256 * 1000) /
+ lan966x_ptp_get_period_ps()),
+ lan966x, QSYS_TAS_STM_CFG);
+
+ num_taprio_lists = lan966x->num_phys_ports *
+ LAN966X_TAPRIO_ENTRIES_PER_PORT;
+
+ /* For now we always use guard band on all queues */
+ lan_rmw(QSYS_TAS_CFG_CTRL_LIST_NUM_MAX_SET(num_taprio_lists) |
+ QSYS_TAS_CFG_CTRL_ALWAYS_GB_SCH_Q_SET(1),
+ QSYS_TAS_CFG_CTRL_LIST_NUM_MAX |
+ QSYS_TAS_CFG_CTRL_ALWAYS_GB_SCH_Q,
+ lan966x, QSYS_TAS_CFG_CTRL);
+
+ for (p = 0; p < lan966x->num_phys_ports; p++)
+ lan_rmw(QSYS_TAS_PROFILE_CFG_PORT_NUM_SET(p),
+ QSYS_TAS_PROFILE_CFG_PORT_NUM,
+ lan966x, QSYS_TAS_PROFILE_CFG(p));
+}
+
+void lan966x_taprio_deinit(struct lan966x *lan966x)
+{
+ int p;
+
+ for (p = 0; p < lan966x->num_phys_ports; ++p) {
+ if (!lan966x->ports[p])
+ continue;
+
+ lan966x_taprio_del(lan966x->ports[p]);
+ }
+}
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_tc.c b/drivers/net/ethernet/microchip/lan966x/lan966x_tc.c
index 3fea0937076e1..cabc563f67685 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_tc.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_tc.c
@@ -15,6 +15,13 @@ static int lan966x_tc_setup_qdisc_mqprio(struct lan966x_port *port,
lan966x_mqprio_del(port);
}

+static int lan966x_tc_setup_qdisc_taprio(struct lan966x_port *port,
+ struct tc_taprio_qopt_offload *taprio)
+{
+ return taprio->enable ? lan966x_taprio_add(port, taprio) :
+ lan966x_taprio_del(port);
+}
+
int lan966x_tc_setup(struct net_device *dev, enum tc_setup_type type,
void *type_data)
{
@@ -23,6 +30,8 @@ int lan966x_tc_setup(struct net_device *dev, enum tc_setup_type type,
switch (type) {
case TC_SETUP_QDISC_MQPRIO:
return lan966x_tc_setup_qdisc_mqprio(port, type_data);
+ case TC_SETUP_QDISC_TAPRIO:
+ return lan966x_tc_setup_qdisc_taprio(port, type_data);
default:
return -EOPNOTSUPP;
}
--
2.33.0
\
 
 \ /
  Last update: 2022-09-21 14:23    [W:0.063 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site