lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V4 7/8] ublk_drv: allow new process to open ublk chardev with recovery feature enabled
From
On 2022/9/22 10:38, Ming Lei wrote:
> On Wed, Sep 21, 2022 at 05:58:48PM +0800, ZiyangZhang wrote:
>> With recovery feature enabled, if ublk chardev is ready to be released
>> and quiesce_work has been scheduled, we:
>> (1) cancel monitor_work to avoid UAF on ubq && ublk_io.
>> (2) reinit all ubqs, including:
>> (a) put the task_struct and reset ->ubq_daemon to NULL.
>> (b) reset all ublk_io.
>> (3) reset ub->mm to NULL.
>> Then ublk chardev is released and new process can open it.
>>
>> RESTART_DEV is introduced as a new ctrl-cmd for recovery feature.
>> After the chardev is opened and all ubqs are ready, user should send
>> RESTART_DEV to:
>> (1) wait until all new ubq_daemons getting ready.
>> (2) update ublksrv_pid
>> (3) unquiesce the request queue and expect incoming ublk_queue_rq()
>> (4) convert ub's state to UBLK_S_DEV_LIVE
>> (5) reschedule monitor_work
>>
>> Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
>> ---
>> drivers/block/ublk_drv.c | 109 +++++++++++++++++++++++++++++++++-
>> include/uapi/linux/ublk_cmd.h | 1 +
>> 2 files changed, 109 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index dc33ebc20c01..871cd48503a2 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -912,10 +912,67 @@ static int ublk_ch_open(struct inode *inode, struct file *filp)
>> return 0;
>> }
>>
>> +static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
>> +{
>> + int i;
>> +
>> + WARN_ON_ONCE(!(ubq->ubq_daemon && ubq_daemon_is_dying(ubq)));
>> + pr_devel("%s: prepare for recovering qid %d\n", __func__, ubq->q_id);
>> + /* old daemon is PF_EXITING, put it now */
>> + put_task_struct(ubq->ubq_daemon);
>> + /* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */
>> + ubq->ubq_daemon = NULL;
>
> Then we can kill the task put & reset in ublk_deinit_queue(), and call
> ublk_queue_reinit() unconditionally in ublk_ch_release().

ublk_queue_reinit() can only be called if ub->dev_info.state == UBLK_S_DEV_QUIESCED.
If we have done ublk_deinit_queue(), we cannot not be in UBLK_S_DEV_QUIESCED state.

>
>> +
>> + for (i = 0; i < ubq->q_depth; i++) {
>> + struct ublk_io *io = &ubq->ios[i];
>> +
>> + /* forget everything now and be ready for new FETCH_REQ */
>> + io->flags = 0;
>> + io->cmd = NULL;
>> + io->addr = 0;
>> + }
>> + ubq->nr_io_ready = 0;
>
> I guess the above line should have been WARN_ON_ONCE(!ubq->nr_io_ready)?


Before V4, It was WARN_ON_ONCE(!ubq->nr_io_ready). But ublk_cancel_queue() is called
in __ublk_quiesce_dev() now. In ublk_cancel_queue(), ->nr_io_ready is only decreased
if io->flags is ACTIVE. If some ioucmds has been sent to userspace and then a crash
happens, some ublk_ios' flags are ACTIVE while others are NOT. So here ->nr_io_ready
might not be zero.

ublk_cancel_queue() was called only before/after ublk device is started/stopped.
So in the past, ubq->nr_io_ready is always zero. But now I think
WARN_ON_ONCE(ubq->nr_io_ready) in ublk_cancel_queue() should also be removed
for the above reason.

>
>> +}
>> +
>> static int ublk_ch_release(struct inode *inode, struct file *filp)
>> {
>> struct ublk_device *ub = filp->private_data;
>> + int i;
>> +
>> + /* lockless fast path */
>> + if (!unlikely(ublk_can_use_recovery(ub) && ub->dev_info.state == UBLK_S_DEV_QUIESCED))
>> + goto out_clear;
>> +
>> + mutex_lock(&ub->mutex);
>> + /*
>> + * USER_RECOVERY is only allowd after UBLK_S_DEV_QUIESCED is set,
>> + * which means that:
>> + * (a) request queue has been quiesced
>> + * (b) no inflight rq exists
>> + * (c) all ioucmds owned by ther dying process are completed
>> + */
>> + if (!(ublk_can_use_recovery(ub) && ub->dev_info.state == UBLK_S_DEV_QUIESCED))
>> + goto out_unlock;
>> + pr_devel("%s: reinit queues for dev id %d.\n", __func__, ub->dev_info.dev_id);
>> + /* we are going to release task_struct of ubq_daemon and resets
>> + * ->ubq_daemon to NULL. So in monitor_work, check on ubq_daemon causes UAF.
>> + * Besides, monitor_work is not necessary in QUIESCED state since we have
>> + * already scheduled quiesce_work and quiesced all ubqs.
>> + *
>> + * Do not let monitor_work schedule itself if state it QUIESCED. And we cancel
>> + * it here and re-schedule it in RESTART_DEV to avoid UAF.
>> + */
>> + cancel_delayed_work_sync(&ub->monitor_work);
>
> monitor_work isn't supposed to be done here, which should be called after
> ublk_wait_tagset_rqs_idle(ub) returns.

So we do not need to cancel monbitor_work here and re-schedule it in RESTART_DEV?
I am worried about UAF in monitor_work's check on ubq_daemon since ubq_daemon is
invalid during user recovery.

>
>>
>> + for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
>> + ublk_queue_reinit(ub, ublk_get_queue(ub, i));
>> + /* set to NULL, otherwise new ubq_daemon cannot mmap the io_cmd_buf */
>> + ub->mm = NULL;
>> + ub->nr_queues_ready = 0;
>> + init_completion(&ub->completion);
>
> The above can be done as generic code for both non-recovery and recovery
> code.

OK, it should be moved.

>
>> + out_unlock:
>> + mutex_unlock(&ub->mutex);
>> + out_clear:
>> clear_bit(UB_STATE_OPEN, &ub->state);
>> return 0;
>> }
>> @@ -1199,9 +1256,14 @@ static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
>> ubq->ubq_daemon = current;
>> get_task_struct(ubq->ubq_daemon);
>> ub->nr_queues_ready++;
>> + pr_devel("%s: ub %d qid %d is ready.\n",
>> + __func__, ub->dev_info.dev_id, ubq->q_id);
>> }
>> - if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
>> + if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues) {
>> + pr_devel("%s: ub %d all ubqs are ready.\n",
>> + __func__, ub->dev_info.dev_id);
>> complete_all(&ub->completion);
>> + }
>
> Too many logging.

They will be removed.

>
>> mutex_unlock(&ub->mutex);
>> }
>>
>> @@ -1903,6 +1965,48 @@ static int ublk_ctrl_set_params(struct io_uring_cmd *cmd)
>> return ret;
>> }
>>
>> +static int ublk_ctrl_restart_dev(struct io_uring_cmd *cmd)
>> +{
>> + struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
>> + int ublksrv_pid = (int)header->data[0];
>> + struct ublk_device *ub;
>> + int ret = -EINVAL;
>> +
>> + ub = ublk_get_device_from_id(header->dev_id);
>> + if (!ub)
>> + return ret;
>> +
>> + pr_devel("%s: Waiting for new ubq_daemons(nr: %d) are ready, dev id %d...\n",
>> + __func__, ub->dev_info.nr_hw_queues, header->dev_id);
>> + /* wait until new ubq_daemon sending all FETCH_REQ */
>> + wait_for_completion_interruptible(&ub->completion);
>> + pr_devel("%s: All new ubq_daemons(nr: %d) are ready, dev id %d\n",
>> + __func__, ub->dev_info.nr_hw_queues, header->dev_id);
>> +
>> + mutex_lock(&ub->mutex);
>> + if (!ublk_can_use_recovery(ub))
>> + goto out_unlock;
>> +
>> + if (ub->dev_info.state != UBLK_S_DEV_QUIESCED) {
>> + ret = -EBUSY;
>> + goto out_unlock;
>> + }
>> + ub->dev_info.ublksrv_pid = ublksrv_pid;
>> + pr_devel("%s: new ublksrv_pid %d, dev id %d\n",
>> + __func__, ublksrv_pid, header->dev_id);
>> + blk_mq_unquiesce_queue(ub->ub_disk->queue);
>> + pr_devel("%s: queue unquiesced, dev id %d.\n",
>> + __func__, header->dev_id);
>> + blk_mq_kick_requeue_list(ub->ub_disk->queue);
>> + ub->dev_info.state = UBLK_S_DEV_LIVE;
>> + schedule_delayed_work(&ub->monitor_work, UBLK_DAEMON_MONITOR_PERIOD);
>> + ret = 0;
>> + out_unlock:
>> + mutex_unlock(&ub->mutex);
>> + ublk_put_device(ub);
>> + return ret;
>> +}
>> +
>> static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
>> unsigned int issue_flags)
>> {
>> @@ -1944,6 +2048,9 @@ static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
>> case UBLK_CMD_SET_PARAMS:
>> ret = ublk_ctrl_set_params(cmd);
>> break;
>> + case UBLK_CMD_RESTART_DEV:
>> + ret = ublk_ctrl_restart_dev(cmd);
>> + break;
>> default:
>> break;
>> }
>> diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
>> index 332370628757..a088f374c0f6 100644
>> --- a/include/uapi/linux/ublk_cmd.h
>> +++ b/include/uapi/linux/ublk_cmd.h
>> @@ -17,6 +17,7 @@
>> #define UBLK_CMD_STOP_DEV 0x07
>> #define UBLK_CMD_SET_PARAMS 0x08
>> #define UBLK_CMD_GET_PARAMS 0x09
>> +#define UBLK_CMD_RESTART_DEV 0x10
>
> Maybe RESET_DEV or RECOVERY_DEV is better given userspace does not
> send STOP_DEV command
OK.

Regards,
Zhang

\
 
 \ /
  Last update: 2022-09-22 05:01    [W:0.066 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site