lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 8/8] i2c: i2c-mlxbf.c: Update binding devicetree
From
On 20/09/2022 19:47, Asmaa Mnebhi wrote:
> In the latest version of the i2c-mlxbf.c driver, the "Smbus block"
> resource was broken down to 3 separate resources "Smbus timer",
> "Smbus master" and "Smbus slave" to accommodate for BlueField-3
> SoC registers' changes.
>
> Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
> ---


> reg:
> minItems: 3
> @@ -25,6 +27,9 @@ properties:
> - description: Cause master registers
> - description: Cause slave registers
> - description: Cause coalesce registers
> + - description: Smbus timer registers
> + - description: Smbus master registers
> + - description: Smbus slave registers
>
> interrupts:
> maxItems: 1
> @@ -35,6 +40,13 @@ properties:
> bus frequency used to configure timing registers;
> The frequency is expressed in Hz. Default is 100000.
>
> + resource_version:

No underscores in names.

> + enum: [ 0, 1 ]
> + description:
> + Version of the device tree. resource_version = 0 when the driver uses
> + Smbus block resource. resource_version = 1 when the driver uses Smbus
> + timer, Smbus master and Smbus slave resources.

No way. That's not a DT property.

> +
> required:
> - compatible
> - reg
> @@ -42,18 +54,6 @@ required:
>
> unevaluatedProperties: false
>
> -if:
> - properties:
> - compatible:
> - contains:
> - enum:
> - - mellanox,i2c-mlxbf1
> -
> -then:
> - properties:
> - reg:
> - maxItems: 3

Why?

> -
> examples:
> - |
> i2c@2804000 {
> @@ -61,8 +61,13 @@ examples:
> reg = <0x02804000 0x800>,
> <0x02801200 0x020>,
> <0x02801260 0x020>;
> + <0x00000001 0x1>;
> + <0x02804000 0x40>,
> + <0x02804200 0x200>,
> + <0x02804400 0x200>,
> interrupts = <57>;
> clock-frequency = <100000>;
> + resource_version = <1>;
> };
>
> - |
> @@ -72,6 +77,25 @@ examples:
> <0x02808e00 0x020>,
> <0x02808e20 0x020>,
> <0x02808e40 0x010>;
> + <0x02808800 0x040>;
> + <0x02808a00 0x200>,
> + <0x02808c00 0x200>,
> interrupts = <57>;
> clock-frequency = <400000>;
> + resource_version = <1>;
> + };
> +
> + - |
> + i2c@2808800 {
> + compatible = "mellanox,i2c-mlxbf3";
> + reg = <0x00000001 0x1>,
> + <0x13404400 0x020>,
> + <0x13404420 0x020>,
> + <0x13404440 0x010>;
> + <0x13404480 0x40>,
> + <0x13404200 0x200>,
> + <0x13404000 0x200>,

No need for the same example.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-21 09:00    [W:0.142 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site