lkml.org 
[lkml]   [2022]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] mmc: sdhci-tegra: Use actual clock rate for SW tuning correction
Date
Ensure tegra_host member "curr_clk_rate" holds the actual clock rate
instead of requested clock rate for proper use during tuning correction
algorithm. Actual clk rate may not be the same as the requested clk
frequency depending on the parent clock source set. Tuning correction
algorithm depends on certain parameters which are sensitive to current
clk rate. If the host clk is selected instead of the actual clock rate,
tuning correction algorithm may end up applying invalid correction,
which could result in errors

Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process")

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 58449e010a9b..10f6df070456 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -780,7 +780,7 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
dev_err(dev, "failed to set clk rate to %luHz: %d\n",
host_clk, err);

- tegra_host->curr_clk_rate = host_clk;
+ tegra_host->curr_clk_rate = clk_get_rate(pltfm_host->clk);
if (tegra_host->ddr_signaling)
host->max_clk = host_clk;
else
--
2.17.1
\
 
 \ /
  Last update: 2022-09-20 14:39    [W:0.068 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site