lkml.org 
[lkml]   [2022]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] media: mt9m111: add V4L2_CID_LINK_FREQ support
Hi Marco

On Fri, Sep 16, 2022 at 03:57:11PM +0200, Marco Felsch wrote:
> Add support to report the link frequency.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> The v1 of this small series can be found here:
> https://lore.kernel.org/all/20220818144712.997477-1-m.felsch@pengutronix.de/
>
> Thanks a lot to Jacopo for the review feedback on my v1.
>
> Changelog:
>
> v2:
> - use V4L2_CID_LINK_FREQ instead of V4L2_CID_PIXEL_RATE
> ---
> drivers/media/i2c/mt9m111.c | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> index afc86efa9e3e..52be1c310455 100644
> --- a/drivers/media/i2c/mt9m111.c
> +++ b/drivers/media/i2c/mt9m111.c
> @@ -1249,6 +1249,8 @@ static int mt9m111_probe(struct i2c_client *client)
> {
> struct mt9m111 *mt9m111;
> struct i2c_adapter *adapter = client->adapter;
> + static s64 extclk_rate;

Why static ?
Also clk_get_rate() returns an unsigned long


> + struct v4l2_ctrl *ctrl;
> int ret;
>
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
> @@ -1271,6 +1273,13 @@ static int mt9m111_probe(struct i2c_client *client)
> if (IS_ERR(mt9m111->clk))
> return PTR_ERR(mt9m111->clk);
>
> + ret = clk_prepare_enable(mt9m111->clk);
> + if (ret < 0)
> + return ret;
> +
> + extclk_rate = clk_get_rate(mt9m111->clk);
> + clk_disable_unprepare(mt9m111->clk);
> +
> mt9m111->regulator = devm_regulator_get(&client->dev, "vdd");
> if (IS_ERR(mt9m111->regulator)) {
> dev_err(&client->dev, "regulator not found: %ld\n",
> @@ -1285,7 +1294,7 @@ static int mt9m111_probe(struct i2c_client *client)
> mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> V4L2_SUBDEV_FL_HAS_EVENTS;
>
> - v4l2_ctrl_handler_init(&mt9m111->hdl, 7);
> + v4l2_ctrl_handler_init(&mt9m111->hdl, 8);
> v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
> V4L2_CID_VFLIP, 0, 1, 1, 0);
> v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
> @@ -1309,6 +1318,16 @@ static int mt9m111_probe(struct i2c_client *client)
> BIT(V4L2_COLORFX_NEGATIVE) |
> BIT(V4L2_COLORFX_SOLARIZATION)),
> V4L2_COLORFX_NONE);

Empty line maybe ?

> + /*
> + * The extclk rate equals the link freq. if reg default values are used,
> + * which is the case. This must be adapted as soon as we don't use the
> + * default values anymore.
> + */
> + ctrl = v4l2_ctrl_new_int_menu(&mt9m111->hdl, &mt9m111_ctrl_ops,
> + V4L2_CID_LINK_FREQ, 0, 0, &extclk_rate);
> + if (ctrl)
> + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +

I'm sorry I have not replied to your previous email about using
LINK_FREQ for parallel busses.. I see it mentioned in ext-ctrls-image-process.rst
as you said:

``V4L2_CID_LINK_FREQ (integer menu)``
The frequency of the data bus (e.g. parallel or CSI-2).

I still have a bit of troubles seeing it apply nicely on a parallel
bus. Isn't PIXEL_RATE more appropriate ? You said you need to know the
overall bus bandwidth in bytes , and pixel_rate * bpp / 8 is equally
valid and easy as link_freq / num_lanes, which requires the receiver
to fetch the remote subdev media bus configuration instead of relying
on the input format. Also LINK_FREQ is a menu control, something nasty
already for CSI-2 busses, which requires to pre-calculate the link
freqs based on the input mclk. It is also meant to be changed by
userspace, while PIXEL_RATE is RO by default.

Sakari, Laurent, what's your take here ?



> mt9m111->subdev.ctrl_handler = &mt9m111->hdl;
> if (mt9m111->hdl.error) {
> ret = mt9m111->hdl.error;
> --
> 2.30.2
>

\
 
 \ /
  Last update: 2022-09-20 11:44    [W:0.468 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site