lkml.org 
[lkml]   [2022]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation
From
On 20/09/2022 10:32, Tomer Maimon wrote:
> On Tue, 20 Sept 2022 at 11:21, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 20/09/2022 09:59, Tomer Maimon wrote:
>>>>>>>>> + pinctrl: pinctrl@f0800000 {
>>>>>>>>> + compatible = "nuvoton,npcm845-pinctrl";
>>>>>>>>> + ranges = <0x0 0x0 0xf0010000 0x8000>;
>>>>>>>>> + #address-cells = <1>;
>>>>>>>>> + #size-cells = <1>;
>>>>>>>>> + nuvoton,sysgcr = <&gcr>;
>>>>>>>>> +
>>>>>>>>> + gpio0: gpio@f0010000 {
>>>>>>>>
>>>>>>>> gpio@0
>>>>>>>>
>>>>>>>> Is this really a child block of the pinctrl? Doesn't really look like it
>>>>>>>> based on addressess. Where are the pinctrl registers? In the sysgcr? If
>>>>>>>> so, then pinctrl should be a child of it. But that doesn't really work
>>>>>>>> too well with gpio child nodes...
>>>>>>> the pin controller mux is handled by sysgcr this is why the sysgcr in
>>>>>>> the mother node,
>>>>>>> and the pin configuration are handled by the GPIO registers. each
>>>>>>> GPIO bank (child) contains 32 GPIO.
>>>>>>> this is why the GPIO is the child node.
>>>>>>
>>>>>> Then maybe pinctrl should be the sysgcr and expose regmap for other devices?
>>>>> The pin controller using the sysgcr to handle the pinmux, this is why
>>>>> the sysgcr is in the mother node, is it problematic?
>>>>
>>>> You said pin-controller mux registers are in sysgcr, so it should not be
>>>> used via syscon.
>>> Sorry but maybe I missed something.
>>> the sysgcr is used for miscellaneous features and not only for the pin
>>> controller mux, this is why it used syscon and defined in the dtsi:
>>> gcr: system-controller@f0800000 {
>>> compatible = "nuvoton,npcm845-gcr", "syscon";
>>> reg = <0x0 0xf0800000 0x0 0x1000>;
>>> };
>>>>
>>>> Please provide address map description to convince us that this is
>>>> correct HW representation.
>>> GCR (sysgcr) registers 0xf0800000-0xf0801000 - used for miscellaneous
>>> features, not only pin mux.
>>> GPIO0 0xf0010000-0xf0011000
>>> GPIO1 0xf0011000-0xf0012000
>>> ...
>>> GPIO7 0xf0017000-0xf0018000
>>>>
>>
>> Then why your pinctrl is in sysgcr IO range? (pinctrl@f0800000)
> you suggest using pinctrl@0 or pinctrl@f0010000 and not
> pinctrl@f0800000 because 0xf0800000 is the GCR address that serve
> miscellaneous features and not only pinmux controller ?

If you have a map like you pasted, then DTS like this:

syscon@f0800000 {}
pinctrl@f0800000 {
gpio@f0010000 {}
}

Is quite weird, don't you think? You have two devices on the same unit
address which is not allowed. You have child of pinctrl with entirely
different unit address, so how is it its child?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-20 10:50    [W:0.109 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site