lkml.org 
[lkml]   [2022]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 07/10] riscv: dts: r9a07g043: Add placeholder nodes
Date
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add empty placeholder nodes to RZ/Five (R9A07G043) SoC DTSI.

This is in preparation to reuse the RZ/G2UL SMARC SoM and carrier board
DTSIs([0] and [1]).

As the RZ/G2UL SMARC EVK enables almost all the blocks supported by the
SoC and whereas for the RZ/Five SMARC EVK we will gradually be enabling
the blocks as a result we are adding the placeholder nodes to avoid DTB
compilation errors (currently we dont have support in DTC to delete the
reference nodes without actual nodes).

[0] arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
[1] arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3 -> v4
* Dropped status and reg-names properties
* Updated the commit message
* Note sbc node is not enabled in RZ/G2UL SMARC EVK but will be soon
enabled so added a placeholder for this too.

v2 -> v3
* New patch
---
arch/riscv/boot/dts/renesas/r9a07g043.dtsi | 150 +++++++++++++++++++++
1 file changed, 150 insertions(+)

diff --git a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
index fb6733f3cc2b..d90d263b1b13 100644
--- a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
+++ b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
@@ -13,6 +13,14 @@ / {
#address-cells = <2>;
#size-cells = <2>;

+ audio_clk1: audio1-clk {
+ /* placeholder */
+ };
+
+ audio_clk2: audio2-clk {
+ /* placeholder */
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -54,6 +62,19 @@ soc: soc {
#size-cells = <2>;
ranges;

+ ssi1: ssi@1004a000 {
+ reg = <0 0x1004a000 0 0x400>;
+ #sound-dai-cells = <0>;
+
+ /* placeholder */
+ };
+
+ spi1: spi@1004b000 {
+ reg = <0 0x1004b000 0 0x400>;
+
+ /* placeholder */
+ };
+
scif0: serial@1004b800 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
@@ -73,6 +94,41 @@ scif0: serial@1004b800 {
status = "disabled";
};

+ canfd: can@10050000 {
+ reg = <0 0x10050000 0 0x8000>;
+
+ /* placeholder */
+ };
+
+ i2c0: i2c@10058000 {
+ reg = <0 0x10058000 0 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* placeholder */
+ };
+
+ i2c1: i2c@10058400 {
+ reg = <0 0x10058400 0 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* placeholder */
+ };
+
+ adc: adc@10059000 {
+ reg = <0 0x10059000 0 0x400>;
+
+ /* placeholder */
+ };
+
+ sbc: spi@10060000 {
+ reg = <0 0x10060000 0 0x10000>,
+ <0 0x20000000 0 0x10000000>,
+ <0 0x10070000 0 0x10000>;
+
+ /* placeholder */
+ };
+
cpg: clock-controller@11010000 {
compatible = "renesas,r9a07g043-cpg";
reg = <0 0x11010000 0 0x10000>;
@@ -104,6 +160,82 @@ pinctrl: pinctrl@11030000 {
<&cpg R9A07G043_GPIO_SPARE_RESETN>;
};

+ sdhi0: mmc@11c00000 {
+ reg = <0x0 0x11c00000 0 0x10000>;
+
+ /* placeholder */
+ };
+
+ sdhi1: mmc@11c10000 {
+ reg = <0x0 0x11c10000 0 0x10000>;
+
+ /* placeholder */
+ };
+
+ eth0: ethernet@11c20000 {
+ reg = <0 0x11c20000 0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* placeholder */
+ };
+
+ eth1: ethernet@11c30000 {
+ reg = <0 0x11c30000 0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* placeholder */
+ };
+
+ phyrst: usbphy-ctrl@11c40000 {
+ reg = <0 0x11c40000 0 0x10000>;
+
+ /* placeholder */
+ };
+
+ ohci0: usb@11c50000 {
+ reg = <0 0x11c50000 0 0x100>;
+
+ /* placeholder */
+ };
+
+ ohci1: usb@11c70000 {
+ reg = <0 0x11c70000 0 0x100>;
+
+ /* placeholder */
+ };
+
+ ehci0: usb@11c50100 {
+ reg = <0 0x11c50100 0 0x100>;
+
+ /* placeholder */
+ };
+
+ ehci1: usb@11c70100 {
+ reg = <0 0x11c70100 0 0x100>;
+
+ /* placeholder */
+ };
+
+ usb2_phy0: usb-phy@11c50200 {
+ reg = <0 0x11c50200 0 0x700>;
+
+ /* placeholder */
+ };
+
+ usb2_phy1: usb-phy@11c70200 {
+ reg = <0 0x11c70200 0 0x700>;
+
+ /* placeholder */
+ };
+
+ hsusb: usb@11c60000 {
+ reg = <0 0x11c60000 0 0x10000>;
+
+ /* placeholder */
+ };
+
plic: interrupt-controller@12c00000 {
compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
#interrupt-cells = <2>;
@@ -116,5 +248,23 @@ plic: interrupt-controller@12c00000 {
resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
};
+
+ wdt0: watchdog@12800800 {
+ reg = <0 0x12800800 0 0x400>;
+
+ /* placeholder */
+ };
+
+ ostm1: timer@12801400 {
+ reg = <0x0 0x12801400 0x0 0x400>;
+
+ /* placeholder */
+ };
+
+ ostm2: timer@12801800 {
+ reg = <0x0 0x12801800 0x0 0x400>;
+
+ /* placeholder */
+ };
};
};
--
2.25.1
\
 
 \ /
  Last update: 2022-09-20 20:52    [W:0.199 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site