lkml.org 
[lkml]   [2022]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] ARM: dts: kirkwood: lsxl: remove first ethernet port
Date
Michael Walle <michael@walle.cc> writes:

> Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
> port. This has always been wrong, i.e. the board code used to set up
> both ports, but the driver will play nice and return -ENODEV if the
> assiciated PHY is not found. Nevertheless, it is wrong. Remove it.
>
> Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
> Signed-off-by: Michael Walle <michael@walle.cc>

Applied on mvebu/dt

Thanks,

Gregory
> ---
> arch/arm/boot/dts/kirkwood-lsxl.dtsi | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
> index 321a40a98ed2..88b70ba1c8fe 100644
> --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
> @@ -218,22 +218,11 @@ hdd_power: regulator@2 {
> &mdio {
> status = "okay";
>
> - ethphy0: ethernet-phy@0 {
> - reg = <0>;
> - };
> -
> ethphy1: ethernet-phy@8 {
> reg = <8>;
> };
> };
>
> -&eth0 {
> - status = "okay";
> - ethernet0-port@0 {
> - phy-handle = <&ethphy0>;
> - };
> -};
> -
> &eth1 {
> status = "okay";
> ethernet1-port@0 {
> --
> 2.30.2
>

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2022-09-02 16:54    [W:0.084 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site