lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/9] docs: i2c: i2c-protocol: remove unused legend items
Date
From: Luca Ceresoli <luca.ceresoli@bootlin.com>

"Comm", "Count", "DataLow", "DataHigh" are not used in this section.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Documentation/i2c/i2c-protocol.rst | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 7ffada1f3335..df0febfe6410 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -15,11 +15,7 @@ Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
Addr (7 bits) I2C 7 bit address. Note that this can be expanded to
get a 10 bit I2C address.
-Comm (8 bits) Command byte, a data byte which often selects a register on
- the device.
-Data (8 bits) A plain data byte. Sometimes, I write DataLow, DataHigh
- for 16 bit data.
-Count (8 bits) A data byte containing the length of a block operation.
+Data (8 bits) A plain data byte.

[..] Data sent by I2C device, as opposed to data sent by the
host adapter.
--
2.34.1
\
 
 \ /
  Last update: 2022-08-08 16:18    [W:0.120 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site