lkml.org 
[lkml]   [2022]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
On Wed, 3 Aug 2022 13:28:36 +0300
Claudiu Beznea <claudiu.beznea@microchip.com> wrote:

> Hi,
>
> The following series add support for temperature sensor available on
> SAMA7G5.
>
> Temperature sensor available on SAMA7G5 provides 2 outputs VTEMP and VBG.
> VTEMP is proportional to the absolute temperature voltage and VBG is a
> quasi-temperature independent voltage. Both are necessary in computing
> the temperature (for better accuracy). Also, for better accuracy the
> following settings were imposed when measusing the temperature:
> oversampling rate of 256, sampling frequency of 10MHz, a startup time of
> 512 ticks, MR.tracktim=0xf, EMR.trackx=0x3.
>
> For computing the temperature measured by ADC calibration data is
> necessary. This is provided via OTP memory available on SAMA7G5.
>
> Patches 1/19-4/19 provides some fixes.
> Patches 5/19-16/19 prepares for the addition of temperature sensor
> support.
> Patch 17/16 adds the temperature sensor support.
>
> Along with temperature sensor support I took the chance and added
> runtime PM support in this series, too (handled in patch 19/19).
>
> The rest of patches in this series are minor cleanups.
Dropped v2 adn replaced with this one. For now just pushed out as
testing to let the autobuilders take another look at it.
I'll rebase when rc1 is out and then push this out for linux-next
to pick up.

Thanks,

Jonathan

>
> Thank you,
> Claudiu Beznea
>
> Changes in v3:
> - fixed compilation warning by adjusting patches 10/19, 11/19
>
> Changes in v2:
> - addressed review comments
> - with this, new patches were intruced in this series: 2/19, 4/19,
> 8/19, 9,19
> - runtime pm support has been adapted to work also when CONFIG_PM
> is not enabled
> - collected tags
>
> Claudiu Beznea (19):
> iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
> iio: adc: at91-sama5d2_adc: check return status for pressure and touch
> iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
> iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
> iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are
> enabled
> iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw
> versions
> iio: adc: at91-sama5d2_adc: move the check of oversampling in its
> function
> iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines
> iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
> iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
> iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
> iio: adc: at91-sama5d2_adc: move oversampling storage in its function
> iio: adc: at91-sama5d2_adc: update trackx on emr
> iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for
> at91_adc_setup_samp_freq()
> iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()
> dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature
> channel
> iio: adc: at91-sama5d2_adc: add support for temperature sensor
> iio: adc: at91-sama5d2_adc: add empty line after functions
> iio: adc: at91-sama5d2_adc: add runtime pm support
>
> drivers/iio/adc/at91-sama5d2_adc.c | 684 +++++++++++++++---
> .../dt-bindings/iio/adc/at91-sama5d2_adc.h | 3 +
> 2 files changed, 568 insertions(+), 119 deletions(-)
>

\
 
 \ /
  Last update: 2022-08-06 16:02    [W:0.598 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site