lkml.org 
[lkml]   [2022]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] drm/amd/display: consider DSC pass-through during mode validation
Date
Add a mode validation routine for DSC pass-through. Both the link from
source to hub, and the link from hub to monitor are checked, according
to the current link training result and full pbn returned by enum path
resource sideband message.

Pick up the minimum value as the bandwidth bottleneck for the end to
end link bandwidth constraint, and check if the maximum DSC decompression
bandwidth can fit.

Co-authored-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
---
v2: use multi-line comments, use a temp variable in kbps_from_pbn() and
add a debug print statement in dm_dp_mst_is_port_support_mode().
---
.../display/amdgpu_dm/amdgpu_dm_mst_types.c | 79 +++++++++++++++++--
1 file changed, 74 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 2e74ccf7df5b..ef6c94cd852b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -36,6 +36,7 @@
#include "dm_helpers.h"

#include "dc_link_ddc.h"
+#include "dc_link_dp.h"
#include "ddc_service_types.h"
#include "dpcd_defs.h"

@@ -1388,17 +1389,85 @@ bool pre_validate_dsc(struct drm_atomic_state *state,

#endif

+static unsigned int kbps_from_pbn(unsigned int pbn)
+{
+ unsigned int kbps = pbn;
+
+ kbps *= (1000000 / PEAK_FACTOR_X1000);
+ kbps *= 8;
+ kbps *= 54;
+ kbps /= 64;
+
+ return kbps;
+}
+
+static bool is_dsc_common_config_possible(struct dc_stream_state *stream,
+ struct dc_dsc_bw_range *bw_range)
+{
+ struct dc_dsc_policy dsc_policy = {0};
+
+ dc_dsc_get_policy_for_timing(&stream->timing, 0, &dsc_policy);
+ dc_dsc_compute_bandwidth_range(stream->sink->ctx->dc->res_pool->dscs[0],
+ stream->sink->ctx->dc->debug.dsc_min_slice_height_override,
+ dsc_policy.min_target_bpp * 16,
+ dsc_policy.max_target_bpp * 16,
+ &stream->sink->dsc_caps.dsc_dec_caps,
+ &stream->timing, bw_range);
+
+ return bw_range->max_target_bpp_x16 && bw_range->min_target_bpp_x16;
+}
+
enum dc_status dm_dp_mst_is_port_support_mode(
struct amdgpu_dm_connector *aconnector,
struct dc_stream_state *stream)
{
+ struct dc_link_settings cur_link_settings;
+ unsigned int end_to_end_bw_in_kbps = 0;
+ unsigned int upper_link_bw_in_kbps = 0, down_link_bw_in_kbps = 0;
+ unsigned int max_compressed_bw_in_kbps = 0;
+ struct dc_dsc_bw_range bw_range = {0};
int bpp, pbn, branch_max_throughput_mps = 0;

- /* check if mode could be supported within fUll_pbn */
- bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3;
- pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false);
- if (pbn > aconnector->port->full_pbn)
- return DC_FAIL_BANDWIDTH_VALIDATE;
+ /*
+ * check if the mode could be supported if DSC pass-through is supported
+ * AND check if there enough bandwidth available to support the mode
+ * with DSC enabled.
+ */
+ if (is_dsc_common_config_possible(stream, &bw_range) &&
+ aconnector->port->passthrough_aux) {
+ mutex_lock(&aconnector->mst_mgr.lock);
+
+ cur_link_settings = stream->link->verified_link_cap;
+
+ upper_link_bw_in_kbps = dc_link_bandwidth_kbps(aconnector->dc_link,
+ &cur_link_settings
+ );
+ down_link_bw_in_kbps = kbps_from_pbn(aconnector->port->full_pbn);
+
+ /* pick the bottleneck */
+ end_to_end_bw_in_kbps = min(upper_link_bw_in_kbps,
+ down_link_bw_in_kbps);
+
+ mutex_unlock(&aconnector->mst_mgr.lock);
+
+ /*
+ * use the maximum dsc compression bandwidth as the required
+ * bandwidth for the mode
+ */
+ max_compressed_bw_in_kbps = bw_range.min_kbps;
+
+ if (end_to_end_bw_in_kbps < max_compressed_bw_in_kbps) {
+ DRM_DEBUG_DRIVER("Mode does not fit into DSC pass-through bandwidth validation\n");
+ return DC_FAIL_BANDWIDTH_VALIDATE;
+ }
+ } else {
+ /* check if mode could be supported within full_pbn */
+ bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3;
+ pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false);
+
+ if (pbn > aconnector->port->full_pbn)
+ return DC_FAIL_BANDWIDTH_VALIDATE;
+ }

/* check is mst dsc output bandwidth branch_overall_throughput_0_mps */
switch (stream->timing.pixel_encoding) {
--
2.37.1
\
 
 \ /
  Last update: 2022-08-05 23:15    [W:0.206 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site