lkml.org 
[lkml]   [2022]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] arm64: dts: ls1046a: add gpios based i2c recovery information
Date
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.

Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index c7c6c82626fd..c95a990e2edd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -502,7 +502,7 @@ dspi: spi@2100000 {
};

i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
@@ -516,35 +516,38 @@ i2c0: i2c@2180000 {
};

i2c1: i2c@2190000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ scl-gpios = <&gpio3 2 0>;
status = "disabled";
};

i2c2: i2c@21a0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ scl-gpios = <&gpio3 10 0>;
status = "disabled";
};

i2c3: i2c@21b0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ scl-gpios = <&gpio3 12 0>;
status = "disabled";
};

--
2.37.1
\
 
 \ /
  Last update: 2022-08-25 01:12    [W:0.088 / U:1.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site