lkml.org 
[lkml]   [2022]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/5] gpio-f7188x: Add GPIO support for Nuvoton NCT6116
On Tue, Aug 23, 2022 at 12:23:40PM +0200, Henning Schild wrote:
> Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
> very similar to the ones from Fintek. In other subsystems they also
> share drivers and are called a family of drivers.
>
> For the GPIO subsystem the only difference is that the direction bit is
> reversed and that there is only one data bit per pin. On the SuperIO
> level the logical device is another one.
>
> On a chip level we do not have a manufacturer ID to check and also no
> revision.

...

> - * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
> + * GPIO driver for Fintek and Nuvoton Super-I/O chips

I'm not sure it's good idea to drop it from here. It means reader has to get
this info in a hard way.

...

> +#define gpio_dir_invert(type) ((type) == nct6116d)
> +#define gpio_data_single(type) ((type) == nct6116d)

What's prevents us to add a proper prefix to these? I don't like the idea of
them having "gpio" prefix.

...

> + pr_info(DRVNAME ": Unsupported device 0x%04x\n", devid);
> + pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr);
> + pr_info(DRVNAME ": Found %s at %#x\n",
> + pr_info(DRVNAME ": revision %d\n",

Can we, please, utilize pr_fmt()?

> + (int)superio_inb(addr, SIO_FINTEK_DEVREV));

Explicit casting in printf() means wrong specifier in 99% of cases.

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2022-08-23 18:38    [W:0.116 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site