lkml.org 
[lkml]   [2022]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 13/16] hwmon: (mr75203) add thermal coefficient properties for Moortec PVT controller
On Wed, Aug 17, 2022 at 05:43:18AM +0000, Eliav Farber wrote:
> Add optional "ts-coeff-g", "ts-coeff-h", "ts-coeff-cal5" and
> "ts-coeff-j" properties to be used instead of defaults for the
> thermal equasion.
>
Vendor prefix again, and shouldn;t there be some note about the
to-be-used defaults ?

Guenter

> Signed-off-by: Eliav Farber <farbere@amazon.com>
> ---
> .../bindings/hwmon/moortec,mr75203.yaml | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> index e2a55001eefc..867664bd937f 100644
> --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> @@ -62,6 +62,30 @@ properties:
> used to normalzie the voltage output results.
> $ref: /schemas/types.yaml#definitions/uint32
>
> + ts-coeff-g:
> + description:
> + G coefficient for thermal equation.
> + maxItems: 1
> + $ref: /schemas/types.yaml#definitions/uint32
> +
> + ts-coeff-h:
> + description:
> + H coefficient for thermal equation.
> + maxItems: 1
> + $ref: /schemas/types.yaml#definitions/uint32
> +
> + ts-coeff-cal5:
> + description:
> + cal5 coefficient for thermal equation (can't be 0).
> + maxItems: 1
> + $ref: /schemas/types.yaml#definitions/uint32
> +
> + ts-coeff-j:
> + description:
> + J coefficient for thermal equation.
> + maxItems: 1
> + $ref: /schemas/types.yaml#definitions/int32
> +
> required:
> - compatible
> - reg
> @@ -75,6 +99,10 @@ additionalProperties:
> - reset-control-skip
> - vm-active-channels
> - vm-pre-scalar-ch#
> + - ts-coeff-g
> + - ts-coeff-h
> + - ts-coeff-cal5
> + - ts-coeff-j
>
> examples:
> - |
> @@ -90,5 +118,10 @@ examples:
> resets = <&rcu0 0x40 7>;
> vm-active-channels = [08 10 02];
> vm-pre-scalar-ch5 = <2>;
> + ts-coeff-g = <57400>;
> + ts-coeff-h = <249400>;
> + ts-coeff-cal5 = <4096>;
> + ts-coeff-j = <0>;
> +
> #thermal-sensor-cells = <1>;
> };

\
 
 \ /
  Last update: 2022-08-18 22:26    [W:1.019 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site