lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH V3 net 1/2] dt-bindings: net: ar803x: add disable-hibernation-mode propetry
    Date
    From: Wei Fang <wei.fang@nxp.com>

    The hibernation mode of Atheros AR803x PHYs defaults to be
    enabled after hardware reset. When the cable is unplugged,
    the PHY will enter hibernation mode after about 10 seconds
    and the PHY clocks will be stopped to save power.
    However, some MACs need the phy output clock for proper
    functioning of their logic. For instance, stmmac needs the
    RX_CLK of PHY for software reset to complete.
    Therefore, add a DT property to configure the PHY to disable
    this hardware hibernation mode.

    Signed-off-by: Wei Fang <wei.fang@nxp.com>
    ---
    V2 change:
    1. Add subject prefix.
    2. Modify the property name and description to make them clear.
    V3 change:
    According to Andrew's suggestion, remodify the description to
    make it clear.
    ---
    Documentation/devicetree/bindings/net/qca,ar803x.yaml | 8 ++++++++
    1 file changed, 8 insertions(+)

    diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
    index b3d4013b7ca6..161d28919316 100644
    --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
    +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
    @@ -40,6 +40,14 @@ properties:
    Only supported on the AR8031.
    type: boolean

    + qca,disable-hibernation-mode:
    + description: |
    + Disable Atheros AR803X PHYs hibernation mode. If present, indicates
    + that the hardware of PHY will not enter power saving mode when the
    + cable is disconnected. And the RX_CLK always keeps outputting a
    + valid clock.
    + type: boolean
    +
    qca,smarteee-tw-us-100m:
    description: EEE Tw parameter for 100M links.
    $ref: /schemas/types.yaml#/definitions/uint32
    --
    2.25.1
    \
     
     \ /
      Last update: 2022-08-18 05:02    [W:2.457 / U:0.120 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site