lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/16] hwmon: (mr75203) add VM active channels property for Moortec PVT controller
Date
Add optional "vm-active-channels" property to define the number of
active channels per VM.

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
.../devicetree/bindings/hwmon/moortec,mr75203.yaml | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index da9c3cdcb6f0..6111b5069b3c 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -49,6 +49,13 @@ properties:
reset-control-skip bool property defines if obtaining a
reference to a reset controller should be skipped.

+ vm-active-channels:
+ description:
+ vm-active-channels defines the number of channels per VM
+ that are actually used and are connected to some source.
+ A value of 0 means that the entire VM sensor is nou used.
+ $ref: /schemas/types.yaml#definitions/uint8-array
+
required:
- compatible
- reg
@@ -60,6 +67,7 @@ required:
additionalProperties:
- intel,vm-map
- reset-control-skip
+ - vm-active-channels

examples:
- |
@@ -73,5 +81,6 @@ examples:
intel,vm-map = [03 01 04 ff ff];
clocks = <&osc0>;
resets = <&rcu0 0x40 7>;
+ vm-active-channels = [08 10 02];
#thermal-sensor-cells = <1>;
};
--
2.37.1
\
 
 \ /
  Last update: 2022-08-16 12:32    [W:0.624 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site