lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
On Wed, 10 Aug 2022 at 04:25, Samuel Holland <samuel@sholland.org> wrote:
>
> If the controller is suspended by runtime PM, the clock is already
> disabled, so do not try to disable it again during removal. Use
> pm_runtime_disable() to flush any pending runtime PM transitions.
>
> Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>
> drivers/mmc/host/sunxi-mmc.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index b16e12e62e72..3db9f32d6a7b 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -1492,9 +1492,11 @@ static int sunxi_mmc_remove(struct platform_device *pdev)
> struct sunxi_mmc_host *host = mmc_priv(mmc);
>
> mmc_remove_host(mmc);
> - pm_runtime_force_suspend(&pdev->dev);
> - disable_irq(host->irq);
> - sunxi_mmc_disable(host);

Perhaps a better option than the below, would just be to drop the
above calls to disable_irq() and sunxi_mmc_disable(), as that is
already managed through the call to pm_runtime_force_suspend().

> + pm_runtime_disable(&pdev->dev);
> + if (!pm_runtime_status_suspended(&pdev->dev)) {
> + disable_irq(host->irq);
> + sunxi_mmc_disable(host);
> + }
> dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
> mmc_free_host(mmc);
>

Kind regards
Uffe

\
 
 \ /
  Last update: 2022-08-15 12:14    [W:0.072 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site