lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.18 0234/1095] ARM: dts: qcom-msm8974-lge-nexus5: Use &labels
    Date
    From: Konrad Dybcio <konrad.dybcio@somainline.org>

    [ Upstream commit 1c1574e24990e9f9d753958745b8274874241158 ]

    Use &labels to align with the style used in new DTS and apply tiny
    style fixes.

    Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
    [bjorn: Rebased on top of Krzysztof's fixes]
    Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    Link: https://lore.kernel.org/r/20220415115633.575010-11-konrad.dybcio@somainline.org
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    .../qcom-msm8974-lge-nexus5-hammerhead.dts | 1110 ++++++++---------
    1 file changed, 536 insertions(+), 574 deletions(-)

    diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
    index 4154ffb207ac..a1cae3d453c2 100644
    --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
    +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
    @@ -40,209 +40,6 @@ volume-down {
    };
    };

    - smd {
    - rpm {
    - rpm-requests {
    - pm8841-regulators {
    - s1 {
    - regulator-min-microvolt = <675000>;
    - regulator-max-microvolt = <1050000>;
    - };
    -
    - s2 {
    - regulator-min-microvolt = <500000>;
    - regulator-max-microvolt = <1050000>;
    - };
    -
    - s3 {
    - regulator-min-microvolt = <1050000>;
    - regulator-max-microvolt = <1050000>;
    - };
    -
    - s4 {
    - regulator-min-microvolt = <815000>;
    - regulator-max-microvolt = <900000>;
    - };
    - };
    -
    - pm8941-regulators {
    - vdd_l1_l3-supply = <&pm8941_s1>;
    - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
    - vdd_l4_l11-supply = <&pm8941_s1>;
    - vdd_l5_l7-supply = <&pm8941_s2>;
    - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
    - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
    - vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
    - vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
    - vdd_l21-supply = <&vreg_boost>;
    -
    - s1 {
    - regulator-min-microvolt = <1300000>;
    - regulator-max-microvolt = <1300000>;
    -
    - regulator-always-on;
    - regulator-boot-on;
    - };
    -
    - s2 {
    - regulator-min-microvolt = <2150000>;
    - regulator-max-microvolt = <2150000>;
    -
    - regulator-boot-on;
    - };
    -
    - s3 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    -
    - regulator-always-on;
    - regulator-boot-on;
    - };
    -
    - l1 {
    - regulator-min-microvolt = <1225000>;
    - regulator-max-microvolt = <1225000>;
    -
    - regulator-always-on;
    - regulator-boot-on;
    - };
    -
    - l2 {
    - regulator-min-microvolt = <1200000>;
    - regulator-max-microvolt = <1200000>;
    - };
    -
    - l3 {
    - regulator-min-microvolt = <1225000>;
    - regulator-max-microvolt = <1225000>;
    - };
    -
    - l4 {
    - regulator-min-microvolt = <1225000>;
    - regulator-max-microvolt = <1225000>;
    - };
    -
    - l5 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    - };
    -
    - l6 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    -
    - regulator-boot-on;
    - };
    -
    - l7 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    -
    - regulator-boot-on;
    - };
    -
    - l8 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    - };
    -
    - l9 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <2950000>;
    - };
    -
    - l10 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <2950000>;
    - };
    -
    - l11 {
    - regulator-min-microvolt = <1300000>;
    - regulator-max-microvolt = <1300000>;
    - };
    -
    - l12 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    -
    - regulator-always-on;
    - regulator-boot-on;
    - };
    -
    - l13 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <2950000>;
    -
    - regulator-boot-on;
    - };
    -
    - l14 {
    - regulator-min-microvolt = <1800000>;
    - regulator-max-microvolt = <1800000>;
    - };
    -
    - l15 {
    - regulator-min-microvolt = <2050000>;
    - regulator-max-microvolt = <2050000>;
    - };
    -
    - l16 {
    - regulator-min-microvolt = <2700000>;
    - regulator-max-microvolt = <2700000>;
    - };
    -
    - l17 {
    - regulator-min-microvolt = <2850000>;
    - regulator-max-microvolt = <2850000>;
    - };
    -
    - l18 {
    - regulator-min-microvolt = <2850000>;
    - regulator-max-microvolt = <2850000>;
    - };
    -
    - l19 {
    - regulator-min-microvolt = <3000000>;
    - regulator-max-microvolt = <3300000>;
    - };
    -
    - l20 {
    - regulator-min-microvolt = <2950000>;
    - regulator-max-microvolt = <2950000>;
    -
    - regulator-boot-on;
    - regulator-system-load = <200000>;
    - regulator-allow-set-load;
    - };
    -
    - l21 {
    - regulator-min-microvolt = <2950000>;
    - regulator-max-microvolt = <2950000>;
    -
    - regulator-boot-on;
    - };
    -
    - l22 {
    - regulator-min-microvolt = <3000000>;
    - regulator-max-microvolt = <3300000>;
    - };
    -
    - l23 {
    - regulator-min-microvolt = <3000000>;
    - regulator-max-microvolt = <3000000>;
    - };
    -
    - l24 {
    - regulator-min-microvolt = <3075000>;
    - regulator-max-microvolt = <3075000>;
    -
    - regulator-boot-on;
    - };
    - };
    - };
    - };
    - };
    -
    vreg_wlan: wlan-regulator {
    compatible = "regulator-fixed";

    @@ -258,504 +55,669 @@ vreg_wlan: wlan-regulator {
    };
    };

    -&soc {
    - serial@f991d000 {
    - status = "okay";
    +&blsp1_i2c1 {
    + status = "okay";
    + clock-frequency = <100000>;
    +
    + pinctrl-names = "default";
    + pinctrl-0 = <&i2c1_pins>;
    +
    + charger: bq24192@6b {
    + compatible = "ti,bq24192";
    + reg = <0x6b>;
    + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
    +
    + omit-battery-class;
    +
    + usb_otg_vbus: usb-otg-vbus { };
    };

    - pinctrl@fd510000 {
    - sdhc1_pin_a: sdhc1-pin-active {
    - clk {
    - pins = "sdc1_clk";
    - drive-strength = <16>;
    - bias-disable;
    - };
    + fuelgauge: max17048@36 {
    + compatible = "maxim,max17048";
    + reg = <0x36>;

    - cmd-data {
    - pins = "sdc1_cmd", "sdc1_data";
    - drive-strength = <10>;
    - bias-pull-up;
    - };
    - };
    + maxim,double-soc;
    + maxim,rcomp = /bits/ 8 <0x4d>;

    - sdhc2_pin_a: sdhc2-pin-active {
    - clk {
    - pins = "sdc2_clk";
    - drive-strength = <6>;
    - bias-disable;
    - };
    + interrupt-parent = <&tlmm>;
    + interrupts = <9 IRQ_TYPE_LEVEL_LOW>;

    - cmd-data {
    - pins = "sdc2_cmd", "sdc2_data";
    - drive-strength = <6>;
    - bias-pull-up;
    - };
    - };
    + pinctrl-names = "default";
    + pinctrl-0 = <&fuelgauge_pin>;

    - i2c1_pins: i2c1 {
    - mux {
    - pins = "gpio2", "gpio3";
    - function = "blsp_i2c1";
    + maxim,alert-low-soc-level = <2>;
    + };
    +};

    - drive-strength = <2>;
    - bias-disable;
    - };
    - };
    +&blsp1_i2c2 {
    + status = "okay";
    + clock-frequency = <355000>;

    - i2c2_pins: i2c2 {
    - mux {
    - pins = "gpio6", "gpio7";
    - function = "blsp_i2c2";
    + pinctrl-names = "default";
    + pinctrl-0 = <&i2c2_pins>;

    - drive-strength = <2>;
    - bias-disable;
    - };
    + synaptics@70 {
    + compatible = "syna,rmi4-i2c";
    + reg = <0x70>;
    +
    + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
    + vdd-supply = <&pm8941_l22>;
    + vio-supply = <&pm8941_lvs3>;
    +
    + pinctrl-names = "default";
    + pinctrl-0 = <&touch_pin>;
    +
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + rmi4-f01@1 {
    + reg = <0x1>;
    + syna,nosleep-mode = <1>;
    };

    - i2c3_pins: i2c3 {
    - mux {
    - pins = "gpio10", "gpio11";
    - function = "blsp_i2c3";
    - drive-strength = <2>;
    - bias-disable;
    - };
    + rmi4-f12@12 {
    + reg = <0x12>;
    + syna,sensor-type = <1>;
    };
    + };
    +};

    - i2c11_pins: i2c11 {
    - mux {
    - pins = "gpio83", "gpio84";
    - function = "blsp_i2c11";
    +&blsp1_i2c3 {
    + status = "okay";
    + clock-frequency = <100000>;
    +
    + pinctrl-names = "default";
    + pinctrl-0 = <&i2c3_pins>;
    +
    + avago_apds993@39 {
    + compatible = "avago,apds9930";
    + reg = <0x39>;
    + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
    + vdd-supply = <&pm8941_l17>;
    + vddio-supply = <&pm8941_lvs1>;
    + led-max-microamp = <100000>;
    + amstaos,proximity-diodes = <0>;
    + };
    +};

    - drive-strength = <2>;
    - bias-disable;
    - };
    +&blsp2_i2c5 {
    + status = "okay";
    + clock-frequency = <355000>;
    +
    + pinctrl-names = "default";
    + pinctrl-0 = <&i2c11_pins>;
    +
    + led-controller@38 {
    + compatible = "ti,lm3630a";
    + status = "okay";
    + reg = <0x38>;
    +
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + led@0 {
    + reg = <0>;
    + led-sources = <0 1>;
    + label = "lcd-backlight";
    + default-brightness = <200>;
    };
    + };
    +};
    +
    +&blsp2_i2c6 {
    + status = "okay";
    + clock-frequency = <100000>;

    - i2c12_pins: i2c12 {
    - mux {
    - pins = "gpio87", "gpio88";
    - function = "blsp_i2c12";
    - drive-strength = <2>;
    - bias-disable;
    + pinctrl-names = "default";
    + pinctrl-0 = <&i2c12_pins>;
    +
    + mpu6515@68 {
    + compatible = "invensense,mpu6515";
    + reg = <0x68>;
    + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
    + vddio-supply = <&pm8941_lvs1>;
    +
    + pinctrl-names = "default";
    + pinctrl-0 = <&mpu6515_pin>;
    +
    + mount-matrix = "0", "-1", "0",
    + "-1", "0", "0",
    + "0", "0", "1";
    +
    + i2c-gate {
    + #address-cells = <1>;
    + #size-cells = <0>;
    + ak8963@f {
    + compatible = "asahi-kasei,ak8963";
    + reg = <0x0f>;
    + gpios = <&tlmm 67 0>;
    + vid-supply = <&pm8941_lvs1>;
    + vdd-supply = <&pm8941_l17>;
    };
    - };

    - mpu6515_pin: mpu6515 {
    - irq {
    - pins = "gpio73";
    - function = "gpio";
    - bias-disable;
    - input-enable;
    + bmp280@76 {
    + compatible = "bosch,bmp280";
    + reg = <0x76>;
    + vdda-supply = <&pm8941_lvs1>;
    + vddd-supply = <&pm8941_l17>;
    };
    };
    + };
    +};

    - touch_pin: touch {
    - int {
    - pins = "gpio5";
    - function = "gpio";
    +&blsp1_uart1 {
    + status = "okay";
    +};

    - drive-strength = <2>;
    - bias-disable;
    - input-enable;
    - };
    +&blsp2_uart4 {
    + status = "okay";

    - reset {
    - pins = "gpio8";
    - function = "gpio";
    + pinctrl-names = "default";
    + pinctrl-0 = <&blsp2_uart4_pin_a>;

    - drive-strength = <2>;
    - bias-pull-up;
    - };
    - };
    + bluetooth {
    + compatible = "brcm,bcm43438-bt";
    + max-speed = <3000000>;

    - panel_pin: panel {
    - te {
    - pins = "gpio12";
    - function = "mdp_vsync";
    + pinctrl-names = "default";
    + pinctrl-0 = <&bt_pin>;

    - drive-strength = <2>;
    - bias-disable;
    - };
    - };
    + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
    + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
    + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
    + };
    +};

    - bt_pin: bt {
    - hostwake {
    - pins = "gpio42";
    - function = "gpio";
    - };
    +&dsi0 {
    + status = "okay";

    - devwake {
    - pins = "gpio62";
    - function = "gpio";
    - };
    + vdda-supply = <&pm8941_l2>;
    + vdd-supply = <&pm8941_lvs3>;
    + vddio-supply = <&pm8941_l12>;
    +
    + panel: panel@0 {
    + reg = <0>;
    + compatible = "lg,acx467akm-7";

    - shutdown {
    - pins = "gpio41";
    - function = "gpio";
    + pinctrl-names = "default";
    + pinctrl-0 = <&panel_pin>;
    +
    + port {
    + panel_in: endpoint {
    + remote-endpoint = <&dsi0_out>;
    };
    };
    + };
    +};

    - blsp2_uart4_pin_a: blsp2-uart4-pin-active {
    - tx {
    - pins = "gpio53";
    - function = "blsp_uart10";
    +&dsi0_out {
    + remote-endpoint = <&panel_in>;
    + data-lanes = <0 1 2 3>;
    +};

    - drive-strength = <2>;
    - bias-disable;
    - };
    +&dsi0_phy {
    + status = "okay";

    - rx {
    - pins = "gpio54";
    - function = "blsp_uart10";
    + vddio-supply = <&pm8941_l12>;
    +};

    - drive-strength = <2>;
    - bias-pull-up;
    - };
    +&mdss {
    + status = "okay";
    +};

    - cts {
    - pins = "gpio55";
    - function = "blsp_uart10";
    +&otg {
    + status = "okay";

    - drive-strength = <2>;
    - bias-pull-up;
    - };
    + phys = <&usb_hs1_phy>;
    + phy-select = <&tcsr 0xb000 0>;

    - rts {
    - pins = "gpio56";
    - function = "blsp_uart10";
    + extcon = <&charger>, <&usb_id>;
    + vbus-supply = <&usb_otg_vbus>;

    - drive-strength = <2>;
    - bias-disable;
    - };
    + hnp-disable;
    + srp-disable;
    + adp-disable;
    +
    + ulpi {
    + phy@a {
    + status = "okay";
    +
    + v1p8-supply = <&pm8941_l6>;
    + v3p3-supply = <&pm8941_l24>;
    +
    + qcom,init-seq = /bits/ 8 <0x1 0x64>;
    };
    };
    +};

    - sdhci@f9824900 {
    - status = "okay";
    +&pm8941_gpios {
    + gpio_keys_pin_a: gpio-keys-active {
    + pins = "gpio2", "gpio3";
    + function = "normal";

    - vmmc-supply = <&pm8941_l20>;
    - vqmmc-supply = <&pm8941_s3>;
    + bias-pull-up;
    + power-source = <PM8941_GPIO_S3>;
    + };

    - bus-width = <8>;
    - non-removable;
    + fuelgauge_pin: fuelgauge-int {
    + pins = "gpio9";
    + function = "normal";

    - pinctrl-names = "default";
    - pinctrl-0 = <&sdhc1_pin_a>;
    + bias-disable;
    + input-enable;
    + power-source = <PM8941_GPIO_S3>;
    };

    - sdhci@f98a4900 {
    - status = "okay";
    + wlan_sleep_clk_pin: wl-sleep-clk {
    + pins = "gpio16";
    + function = "func2";
    +
    + output-high;
    + power-source = <PM8941_GPIO_S3>;
    + };

    - max-frequency = <100000000>;
    - bus-width = <4>;
    - non-removable;
    - vmmc-supply = <&vreg_wlan>;
    - vqmmc-supply = <&pm8941_s3>;
    + wlan_regulator_pin: wl-reg-active {
    + pins = "gpio17";
    + function = "normal";

    - pinctrl-names = "default";
    - pinctrl-0 = <&sdhc2_pin_a>;
    + bias-disable;
    + power-source = <PM8941_GPIO_S3>;
    + };

    - #address-cells = <1>;
    - #size-cells = <0>;
    + otg {
    + gpio-hog;
    + gpios = <35 GPIO_ACTIVE_HIGH>;
    + output-high;
    + line-name = "otg-gpio";
    + };
    +};
    +
    +&rpm_requests {
    + pm8841-regulators {
    + pm8841_s1: s1 {
    + regulator-min-microvolt = <675000>;
    + regulator-max-microvolt = <1050000>;
    + };

    - bcrmf@1 {
    - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
    - reg = <1>;
    + pm8841_s2: s2 {
    + regulator-min-microvolt = <500000>;
    + regulator-max-microvolt = <1050000>;
    + };

    - brcm,drive-strength = <10>;
    + pm8841_s3: s3 {
    + regulator-min-microvolt = <1050000>;
    + regulator-max-microvolt = <1050000>;
    + };

    - pinctrl-names = "default";
    - pinctrl-0 = <&wlan_sleep_clk_pin>;
    + pm8841_s4: s4 {
    + regulator-min-microvolt = <815000>;
    + regulator-max-microvolt = <900000>;
    };
    };

    - serial@f9960000 {
    - status = "okay";
    + pm8941-regulators {
    + vdd_l1_l3-supply = <&pm8941_s1>;
    + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
    + vdd_l4_l11-supply = <&pm8941_s1>;
    + vdd_l5_l7-supply = <&pm8941_s2>;
    + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
    + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
    + vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
    + vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
    + vdd_l21-supply = <&vreg_boost>;
    +
    + pm8941_s1: s1 {
    + regulator-min-microvolt = <1300000>;
    + regulator-max-microvolt = <1300000>;
    + regulator-always-on;
    + regulator-boot-on;
    + };

    - pinctrl-names = "default";
    - pinctrl-0 = <&blsp2_uart4_pin_a>;
    + pm8941_s2: s2 {
    + regulator-min-microvolt = <2150000>;
    + regulator-max-microvolt = <2150000>;
    + regulator-boot-on;
    + };

    - bluetooth {
    - compatible = "brcm,bcm43438-bt";
    - max-speed = <3000000>;
    + pm8941_s3: s3 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + regulator-boot-on;
    + };

    - pinctrl-names = "default";
    - pinctrl-0 = <&bt_pin>;
    + pm8941_l1: l1 {
    + regulator-min-microvolt = <1225000>;
    + regulator-max-microvolt = <1225000>;
    + regulator-always-on;
    + regulator-boot-on;
    + };

    - host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
    - device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
    - shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
    + pm8941_l2: l2 {
    + regulator-min-microvolt = <1200000>;
    + regulator-max-microvolt = <1200000>;
    };
    - };

    - i2c@f9967000 {
    - status = "okay";
    - pinctrl-names = "default";
    - pinctrl-0 = <&i2c11_pins>;
    - clock-frequency = <355000>;
    - qcom,src-freq = <50000000>;
    + pm8941_l3: l3 {
    + regulator-min-microvolt = <1225000>;
    + regulator-max-microvolt = <1225000>;
    + };

    - led-controller@38 {
    - compatible = "ti,lm3630a";
    - status = "okay";
    - reg = <0x38>;
    + pm8941_l4: l4 {
    + regulator-min-microvolt = <1225000>;
    + regulator-max-microvolt = <1225000>;
    + };

    - #address-cells = <1>;
    - #size-cells = <0>;
    + pm8941_l5: l5 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };

    - led@0 {
    - reg = <0>;
    - led-sources = <0 1>;
    - label = "lcd-backlight";
    - default-brightness = <200>;
    - };
    + pm8941_l6: l6 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-boot-on;
    };
    - };

    - i2c@f9968000 {
    - status = "okay";
    - pinctrl-names = "default";
    - pinctrl-0 = <&i2c12_pins>;
    - clock-frequency = <100000>;
    - qcom,src-freq = <50000000>;
    -
    - mpu6515@68 {
    - compatible = "invensense,mpu6515";
    - reg = <0x68>;
    - interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
    - vddio-supply = <&pm8941_lvs1>;
    -
    - pinctrl-names = "default";
    - pinctrl-0 = <&mpu6515_pin>;
    -
    - mount-matrix = "0", "-1", "0",
    - "-1", "0", "0",
    - "0", "0", "1";
    -
    - i2c-gate {
    - #address-cells = <1>;
    - #size-cells = <0>;
    - ak8963@f {
    - compatible = "asahi-kasei,ak8963";
    - reg = <0x0f>;
    - gpios = <&tlmm 67 0>;
    - vid-supply = <&pm8941_lvs1>;
    - vdd-supply = <&pm8941_l17>;
    - };
    -
    - bmp280@76 {
    - compatible = "bosch,bmp280";
    - reg = <0x76>;
    - vdda-supply = <&pm8941_lvs1>;
    - vddd-supply = <&pm8941_l17>;
    - };
    - };
    + pm8941_l7: l7 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-boot-on;
    };
    - };

    - i2c@f9923000 {
    - status = "okay";
    - pinctrl-names = "default";
    - pinctrl-0 = <&i2c1_pins>;
    - clock-frequency = <100000>;
    - qcom,src-freq = <50000000>;
    + pm8941_l8: l8 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };

    - charger: bq24192@6b {
    - compatible = "ti,bq24192";
    - reg = <0x6b>;
    - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
    + pm8941_l9: l9 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <2950000>;
    + };

    - omit-battery-class;
    + pm8941_l10: l10 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <2950000>;
    + };

    - usb_otg_vbus: usb-otg-vbus { };
    + pm8941_l11: l11 {
    + regulator-min-microvolt = <1300000>;
    + regulator-max-microvolt = <1300000>;
    };

    - fuelgauge: max17048@36 {
    - compatible = "maxim,max17048";
    - reg = <0x36>;
    + pm8941_l12: l12 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-always-on;
    + regulator-boot-on;
    + };
    +
    + pm8941_l13: l13 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <2950000>;
    + regulator-boot-on;
    + };
    +
    + pm8941_l14: l14 {
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };
    +
    + pm8941_l15: l15 {
    + regulator-min-microvolt = <2050000>;
    + regulator-max-microvolt = <2050000>;
    + };
    +
    + pm8941_l16: l16 {
    + regulator-min-microvolt = <2700000>;
    + regulator-max-microvolt = <2700000>;
    + };
    +
    + pm8941_l17: l17 {
    + regulator-min-microvolt = <2850000>;
    + regulator-max-microvolt = <2850000>;
    + };
    +
    + pm8941_l18: l18 {
    + regulator-min-microvolt = <2850000>;
    + regulator-max-microvolt = <2850000>;
    + };
    +
    + pm8941_l19: l19 {
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3300000>;
    + };

    - maxim,double-soc;
    - maxim,rcomp = /bits/ 8 <0x4d>;
    + pm8941_l20: l20 {
    + regulator-min-microvolt = <2950000>;
    + regulator-max-microvolt = <2950000>;
    + regulator-system-load = <200000>;
    + regulator-allow-set-load;
    + regulator-boot-on;
    + };
    +
    + pm8941_l21: l21 {
    + regulator-min-microvolt = <2950000>;
    + regulator-max-microvolt = <2950000>;
    + regulator-boot-on;
    + };

    - interrupt-parent = <&tlmm>;
    - interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
    + pm8941_l22: l22 {
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3300000>;
    + };

    - pinctrl-names = "default";
    - pinctrl-0 = <&fuelgauge_pin>;
    + pm8941_l23: l23 {
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + };

    - maxim,alert-low-soc-level = <2>;
    + pm8941_l24: l24 {
    + regulator-min-microvolt = <3075000>;
    + regulator-max-microvolt = <3075000>;
    + regulator-boot-on;
    };
    };
    +};

    - i2c@f9924000 {
    - status = "okay";
    +&sdhc_1 {
    + status = "okay";

    - clock-frequency = <355000>;
    - qcom,src-freq = <50000000>;
    + vmmc-supply = <&pm8941_l20>;
    + vqmmc-supply = <&pm8941_s3>;

    - pinctrl-names = "default";
    - pinctrl-0 = <&i2c2_pins>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&sdhc1_pin_a>;
    +};

    - synaptics@70 {
    - compatible = "syna,rmi4-i2c";
    - reg = <0x70>;
    +&sdhc_2 {
    + status = "okay";

    - interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
    - vdd-supply = <&pm8941_l22>;
    - vio-supply = <&pm8941_lvs3>;
    + max-frequency = <100000000>;
    + vmmc-supply = <&vreg_wlan>;
    + vqmmc-supply = <&pm8941_s3>;
    + non-removable;

    - pinctrl-names = "default";
    - pinctrl-0 = <&touch_pin>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&sdhc2_pin_a>;

    - #address-cells = <1>;
    - #size-cells = <0>;
    + #address-cells = <1>;
    + #size-cells = <0>;

    - rmi4-f01@1 {
    - reg = <0x1>;
    - syna,nosleep-mode = <1>;
    - };
    + bcrmf@1 {
    + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
    + reg = <1>;

    - rmi4-f12@12 {
    - reg = <0x12>;
    - syna,sensor-type = <1>;
    - };
    + brcm,drive-strength = <10>;
    +
    + pinctrl-names = "default";
    + pinctrl-0 = <&wlan_sleep_clk_pin>;
    + };
    +};
    +
    +&tlmm {
    + sdhc1_pin_a: sdhc1-pin-active {
    + clk {
    + pins = "sdc1_clk";
    + drive-strength = <16>;
    + bias-disable;
    + };
    +
    + cmd-data {
    + pins = "sdc1_cmd", "sdc1_data";
    + drive-strength = <10>;
    + bias-pull-up;
    };
    };

    - i2c@f9925000 {
    - status = "okay";
    - pinctrl-names = "default";
    - pinctrl-0 = <&i2c3_pins>;
    - clock-frequency = <100000>;
    - qcom,src-freq = <50000000>;
    + sdhc2_pin_a: sdhc2-pin-active {
    + clk {
    + pins = "sdc2_clk";
    + drive-strength = <6>;
    + bias-disable;
    + };

    - avago_apds993@39 {
    - compatible = "avago,apds9930";
    - reg = <0x39>;
    - interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
    - vdd-supply = <&pm8941_l17>;
    - vddio-supply = <&pm8941_lvs1>;
    - led-max-microamp = <100000>;
    - amstaos,proximity-diodes = <0>;
    + cmd-data {
    + pins = "sdc2_cmd", "sdc2_data";
    + drive-strength = <6>;
    + bias-pull-up;
    };
    };

    - usb@f9a55000 {
    - status = "okay";
    + i2c1_pins: i2c1 {
    + mux {
    + pins = "gpio2", "gpio3";
    + function = "blsp_i2c1";

    - phys = <&usb_hs1_phy>;
    - phy-select = <&tcsr 0xb000 0>;
    + drive-strength = <2>;
    + bias-disable;
    + };
    + };

    - extcon = <&charger>, <&usb_id>;
    - vbus-supply = <&usb_otg_vbus>;
    + i2c2_pins: i2c2 {
    + mux {
    + pins = "gpio6", "gpio7";
    + function = "blsp_i2c2";

    - hnp-disable;
    - srp-disable;
    - adp-disable;
    + drive-strength = <2>;
    + bias-disable;
    + };
    + };

    - ulpi {
    - phy@a {
    - status = "okay";
    + i2c3_pins: i2c3 {
    + mux {
    + pins = "gpio10", "gpio11";
    + function = "blsp_i2c3";
    + drive-strength = <2>;
    + bias-disable;
    + };
    + };

    - v1p8-supply = <&pm8941_l6>;
    - v3p3-supply = <&pm8941_l24>;
    + i2c11_pins: i2c11 {
    + mux {
    + pins = "gpio83", "gpio84";
    + function = "blsp_i2c11";

    - qcom,init-seq = /bits/ 8 <0x1 0x64>;
    - };
    + drive-strength = <2>;
    + bias-disable;
    };
    };

    - mdss@fd900000 {
    - status = "okay";
    + i2c12_pins: i2c12 {
    + mux {
    + pins = "gpio87", "gpio88";
    + function = "blsp_i2c12";
    + drive-strength = <2>;
    + bias-disable;
    + };
    + };

    - mdp@fd900000 {
    - status = "okay";
    + mpu6515_pin: mpu6515 {
    + irq {
    + pins = "gpio73";
    + function = "gpio";
    + bias-disable;
    + input-enable;
    };
    + };

    - dsi@fd922800 {
    - status = "okay";
    + touch_pin: touch {
    + int {
    + pins = "gpio5";
    + function = "gpio";

    - vdda-supply = <&pm8941_l2>;
    - vdd-supply = <&pm8941_lvs3>;
    - vddio-supply = <&pm8941_l12>;
    + drive-strength = <2>;
    + bias-disable;
    + input-enable;
    + };

    - #address-cells = <1>;
    - #size-cells = <0>;
    + reset {
    + pins = "gpio8";
    + function = "gpio";

    - ports {
    - port@1 {
    - endpoint {
    - remote-endpoint = <&panel_in>;
    - data-lanes = <0 1 2 3>;
    - };
    - };
    - };
    + drive-strength = <2>;
    + bias-pull-up;
    + };
    + };

    - panel: panel@0 {
    - reg = <0>;
    - compatible = "lg,acx467akm-7";
    + panel_pin: panel {
    + te {
    + pins = "gpio12";
    + function = "mdp_vsync";

    - pinctrl-names = "default";
    - pinctrl-0 = <&panel_pin>;
    + drive-strength = <2>;
    + bias-disable;
    + };
    + };

    - port {
    - panel_in: endpoint {
    - remote-endpoint = <&dsi0_out>;
    - };
    - };
    - };
    + bt_pin: bt {
    + hostwake {
    + pins = "gpio42";
    + function = "gpio";
    };

    - dsi-phy@fd922a00 {
    - status = "okay";
    + devwake {
    + pins = "gpio62";
    + function = "gpio";
    + };

    - vddio-supply = <&pm8941_l12>;
    + shutdown {
    + pins = "gpio41";
    + function = "gpio";
    };
    };
    -};

    -&spmi_bus {
    - pm8941@0 {
    - gpios@c000 {
    - gpio_keys_pin_a: gpio-keys-active {
    - pins = "gpio2", "gpio3";
    - function = "normal";
    + blsp2_uart4_pin_a: blsp2-uart4-pin-active {
    + tx {
    + pins = "gpio53";
    + function = "blsp_uart10";

    - bias-pull-up;
    - power-source = <PM8941_GPIO_S3>;
    - };
    -
    - fuelgauge_pin: fuelgauge-int {
    - pins = "gpio9";
    - function = "normal";
    + drive-strength = <2>;
    + bias-disable;
    + };

    - bias-disable;
    - input-enable;
    - power-source = <PM8941_GPIO_S3>;
    - };
    + rx {
    + pins = "gpio54";
    + function = "blsp_uart10";

    - wlan_sleep_clk_pin: wl-sleep-clk {
    - pins = "gpio16";
    - function = "func2";
    + drive-strength = <2>;
    + bias-pull-up;
    + };

    - output-high;
    - power-source = <PM8941_GPIO_S3>;
    - };
    + cts {
    + pins = "gpio55";
    + function = "blsp_uart10";

    - wlan_regulator_pin: wl-reg-active {
    - pins = "gpio17";
    - function = "normal";
    + drive-strength = <2>;
    + bias-pull-up;
    + };

    - bias-disable;
    - power-source = <PM8941_GPIO_S3>;
    - };
    + rts {
    + pins = "gpio56";
    + function = "blsp_uart10";

    - otg {
    - gpio-hog;
    - gpios = <35 GPIO_ACTIVE_HIGH>;
    - output-high;
    - line-name = "otg-gpio";
    - };
    + drive-strength = <2>;
    + bias-disable;
    };
    };
    };
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-08-15 22:45    [W:2.779 / U:0.436 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site