lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.18 0238/1095] ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device
    Date
    From: Konrad Dybcio <konrad.dybcio@somainline.org>

    [ Upstream commit 2daa785817dd35172b856c30fc5148b2773b6891 ]

    The cx-supply has been removed as it's supposed to be set on a
    per-board basis.

    Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
    Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    Link: https://lore.kernel.org/r/20220415115633.575010-17-konrad.dybcio@somainline.org
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/qcom-msm8974.dtsi | 60 ++++++++++++++---------------
    1 file changed, 30 insertions(+), 30 deletions(-)

    diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
    index ea3491d47b9f..e6c9782e4670 100644
    --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
    +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
    @@ -341,36 +341,6 @@ timer {
    clock-frequency = <19200000>;
    };

    - remoteproc_adsp: adsp-pil {
    - compatible = "qcom,msm8974-adsp-pil";
    -
    - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
    - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
    - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
    - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
    - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
    - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
    -
    - cx-supply = <&pm8841_s2>;
    -
    - clocks = <&xo_board>;
    - clock-names = "xo";
    -
    - memory-region = <&adsp_region>;
    -
    - qcom,smem-states = <&adsp_smp2p_out 0>;
    - qcom,smem-state-names = "stop";
    -
    - smd-edge {
    - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
    -
    - qcom,ipc = <&apcs 8 8>;
    - qcom,smd-edge = <1>;
    -
    - label = "lpass";
    - };
    - };
    -
    smem {
    compatible = "qcom,smem";

    @@ -1592,6 +1562,36 @@ dsi0_phy: dsi-phy@fd922a00 {
    };
    };

    + remoteproc_adsp: remoteproc@fe200000 {
    + compatible = "qcom,msm8974-adsp-pil";
    + reg = <0xfe200000 0x100>;
    +
    + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
    + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
    + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
    + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
    + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
    + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
    +
    + clocks = <&xo_board>;
    + clock-names = "xo";
    +
    + memory-region = <&adsp_region>;
    +
    + qcom,smem-states = <&adsp_smp2p_out 0>;
    + qcom,smem-state-names = "stop";
    +
    + smd-edge {
    + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
    +
    + qcom,ipc = <&apcs 8 8>;
    + qcom,smd-edge = <1>;
    + label = "lpass";
    + #address-cells = <1>;
    + #size-cells = <0>;
    + };
    + };
    +
    imem: imem@fe805000 {
    status = "disabled";
    compatible = "syscon", "simple-mfd";
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-08-15 22:39    [W:4.020 / U:0.260 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site