On 13/08/2022 12:48, Luca Weiss wrote:
> Add more IDs that are found in the downstream msm-4.19 kernel under the
> path include/linux/qpnp/qpnp-revid.h.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> I've noticed that some hex numbers in this list have uppercase letters,
> some have lower case ones.
> If wanted I can add a patch converting all to either upper- or lower
> case. Anyone have a preference here?
I think(?) uppercase is the standard for Qualcomm stuff.
> 
>   include/soc/qcom/qcom-spmi-pmic.h | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
> 
> diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h
> index 72398ff44719..bcb8e95d5dab 100644
> --- a/include/soc/qcom/qcom-spmi-pmic.h
> +++ b/include/soc/qcom/qcom-spmi-pmic.h
> @@ -26,18 +26,32 @@
>   #define PM8901_SUBTYPE		0x0f
>   #define PM8950_SUBTYPE		0x10
>   #define PMI8950_SUBTYPE		0x11
> +#define PMK8001_SUBTYPE		0x12
> +#define PMI8996_SUBTYPE		0x13
>   #define PM8998_SUBTYPE		0x14
>   #define PMI8998_SUBTYPE		0x15
> +#define SMB1381_SUBTYPE		0x17 >   #define PM8005_SUBTYPE		0x18
>   #define PM660L_SUBTYPE		0x1A
>   #define PM660_SUBTYPE		0x1B
> +#define SMB1355_SUBTYPE		0x1C
The SHIFT6mq uses this and schematics suggest it doesn't support SPMI. Does it 
make sense to include these secondary charger chips here?
>   #define PM8150_SUBTYPE		0x1E
>   #define PM8150L_SUBTYPE		0x1f
>   #define PM8150B_SUBTYPE		0x20
>   #define PMK8002_SUBTYPE		0x21
> +#define SMB1390_SUBTYPE		0x23
>   #define PM8009_SUBTYPE		0x24
> +#define PMI632_SUBTYPE		0x25
>   #define PM8150C_SUBTYPE		0x26
> +#define PM6150_SUBTYPE		0x28
>   #define SMB2351_SUBTYPE		0x29
> +#define PM8008_SUBTYPE		0x2C
> +#define PM6125_SUBTYPE		0x2D
> +#define PM7250B_SUBTYPE		0x2E
> +#define PMK8350_SUBTYPE		0x2F
> +#define PMR735B_SUBTYPE		0x34
> +#define PM6350_SUBTYPE		0x36
> +#define PM2250_SUBTYPE		0x37
> 
>   #define PMI8998_FAB_ID_SMIC	0x11
>   #define PMI8998_FAB_ID_GF	0x30

-- 
Kind Regards,
Caleb (they/he)