lkml.org 
[lkml]   [2022]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/2] PCI: dwc: Add support for 64-bit MSI target address
On 08/11/2022, Will McVicker wrote:
> Since not all devices require a 32-bit MSI address, add support to the
> PCIe host driver to allow setting the DMA mask to 64-bits. This allows
> kernels to disable ZONE_DMA32 and bounce buffering (swiotlb) without
> risking not being able to get a 32-bit address during DMA allocation.
> Basically, in the slim chance that there are no 32-bit allocations
> available, the current PCIe host driver will fail to allocate the
> msi_msg page due to a DMA address overflow (seen in [1]). With this
> patch, the PCIe device can advertise 64-bit support via its MSI
> capabilities to hint to the PCIe host driver to set the DMA mask to
> 64-bits.
>
> [1] https://lore.kernel.org/all/Yo0soniFborDl7+C@google.com/
>
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Will McVicker <willmcvicker@google.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

> ---
> drivers/pci/controller/dwc/pcie-designware-host.c | 14 ++++++++++++--
> drivers/pci/controller/dwc/pcie-designware.c | 8 ++++++++
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 3 files changed, 21 insertions(+), 2 deletions(-)
…..

\
 
 \ /
  Last update: 2022-08-12 04:47    [W:0.082 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site