lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 0/5] Bluetooth: hci_bcm: Improve FW load time on CYW55572
    Date
    These patches add an optional device specific data member to specify max
    baudrate of a device when in autobaud mode. This allows the host to set a
    first baudrate higher than "init speed" to improve FW load time.

    The host baudrate will later be changed to "init speed" (as usual) once FW
    loading is complete and the device has been reset to begin normal
    operation.

    Changes v1 -> v2:
    - Add patch to tighten DT binding constraints after feedback in:
    https://lore.kernel.org/linux-devicetree/174363bc-e8e5-debd-f8f6-a252d2bbddb9@infineon.com/
    - Add actual baud rates and example FW load time in commit message:
    https://lore.kernel.org/linux-devicetree/72cd312f-f843-6a85-b9e7-db8fcb952af8@infineon.com/

    Hakan Jansson (5):
    dt-bindings: net: broadcom-bluetooth: Add CYW55572 DT binding
    dt-bindings: net: broadcom-bluetooth: Add conditional constraints
    Bluetooth: hci_bcm: Add DT compatible for CYW55572
    Bluetooth: hci_bcm: Prevent early baudrate setting in autobaud mode
    Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud
    mode

    .../bindings/net/broadcom-bluetooth.yaml | 17 +++++++++++++
    drivers/bluetooth/hci_bcm.c | 24 +++++++++++++------
    2 files changed, 34 insertions(+), 7 deletions(-)


    base-commit: 681ec6abcd7f051f7fc318068a3ac09772ebef7e
    --
    2.25.1

    \
     
     \ /
      Last update: 2022-06-30 14:48    [W:3.121 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site