lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3] virtio: disable notification hardening by default
On Thu, Jun 30, 2022 at 10:01:16AM +0800, Jason Wang wrote:
> On Wed, Jun 29, 2022 at 4:52 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > On Wed, Jun 29, 2022 at 04:34:36PM +0800, Jason Wang wrote:
> > > On Wed, Jun 29, 2022 at 3:15 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > >
> > > > On Wed, Jun 29, 2022 at 03:02:21PM +0800, Jason Wang wrote:
> > > > > On Wed, Jun 29, 2022 at 2:31 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > > > >
> > > > > > On Wed, Jun 29, 2022 at 12:07:11PM +0800, Jason Wang wrote:
> > > > > > > On Tue, Jun 28, 2022 at 2:17 PM Jason Wang <jasowang@redhat.com> wrote:
> > > > > > > >
> > > > > > > > On Tue, Jun 28, 2022 at 1:00 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > > > > > > >
> > > > > > > > > On Tue, Jun 28, 2022 at 11:49:12AM +0800, Jason Wang wrote:
> > > > > > > > > > > Heh. Yea sure. But things work fine for people. What is the chance
> > > > > > > > > > > your review found and fixed all driver bugs?
> > > > > > > > > >
> > > > > > > > > > I don't/can't audit all bugs but the race between open/close against
> > > > > > > > > > ready/reset. It looks to me a good chance to fix them all but if you
> > > > > > > > > > think differently, let me know
> > > > > > > > > >
> > > > > > > > > > > After two attempts
> > > > > > > > > > > I don't feel like hoping audit will fix all bugs.
> > > > > > > > > >
> > > > > > > > > > I've started the auditing and have 15+ patches in the queue. (only
> > > > > > > > > > covers bluetooth, console, pmem, virtio-net and caif). Spotting the
> > > > > > > > > > issue is not hard but the testing, It would take at least the time of
> > > > > > > > > > one release to finalize I guess.
> > > > > > > > >
> > > > > > > > > Absolutely. So I am looking for a way to implement hardening that does
> > > > > > > > > not break existing drivers.
> > > > > > > >
> > > > > > > > I totally agree with you to seek a way without bothering the drivers.
> > > > > > > > Just wonder if this is possbile.
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > The reason config was kind of easy is that config interrupt is rarely
> > > > > > > > > > > > > vital for device function so arbitrarily deferring that does not lead to
> > > > > > > > > > > > > deadlocks - what you are trying to do with VQ interrupts is
> > > > > > > > > > > > > fundamentally different. Things are especially bad if we just drop
> > > > > > > > > > > > > an interrupt but deferring can lead to problems too.
> > > > > > > > > > > >
> > > > > > > > > > > > I'm not sure I see the difference, disable_irq() stuffs also delay the
> > > > > > > > > > > > interrupt processing until enable_irq().
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Absolutely. I am not at all sure disable_irq fixes all problems.
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > Consider as an example
> > > > > > > > > > > > > virtio-net: fix race between ndo_open() and virtio_device_ready()
> > > > > > > > > > > > > if you just defer vq interrupts you get deadlocks.
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I don't see a deadlock here, maybe you can show more detail on this?
> > > > > > > > > > >
> > > > > > > > > > > What I mean is this: if we revert the above commit, things still
> > > > > > > > > > > work (out of spec, but still). If we revert and defer interrupts until
> > > > > > > > > > > device ready then ndo_open that triggers before device ready deadlocks.
> > > > > > > > > >
> > > > > > > > > > Ok, I guess you meant on a hypervisor that is strictly written with spec.
> > > > > > > > >
> > > > > > > > > I mean on hypervisor that starts processing queues after getting a kick
> > > > > > > > > even without DRIVER_OK.
> > > > > > > >
> > > > > > > > Oh right.
> > > > > > > >
> > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > So, thinking about all this, how about a simple per vq flag meaning
> > > > > > > > > > > > > "this vq was kicked since reset"?
> > > > > > > > > > > >
> > > > > > > > > > > > And ignore the notification if vq is not kicked? It sounds like the
> > > > > > > > > > > > callback needs to be synchronized with the kick.
> > > > > > > > > > >
> > > > > > > > > > > Note we only need to synchronize it when it changes, which is
> > > > > > > > > > > only during initialization and reset.
> > > > > > > > > >
> > > > > > > > > > Yes.
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > If driver does not kick then it's not ready to get callbacks, right?
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sounds quite clean, but we need to think through memory ordering
> > > > > > > > > > > > > concerns - I guess it's only when we change the value so
> > > > > > > > > > > > > if (!vq->kicked) {
> > > > > > > > > > > > > vq->kicked = true;
> > > > > > > > > > > > > mb();
> > > > > > > > > > > > > }
> > > > > > > > > > > > >
> > > > > > > > > > > > > will do the trick, right?
> > > > > > > > > > > >
> > > > > > > > > > > > There's no much difference with the existing approach:
> > > > > > > > > > > >
> > > > > > > > > > > > 1) your proposal implicitly makes callbacks ready in virtqueue_kick()
> > > > > > > > > > > > 2) my proposal explicitly makes callbacks ready via virtio_device_ready()
> > > > > > > > > > > >
> > > > > > > > > > > > Both require careful auditing of all the existing drivers to make sure
> > > > > > > > > > > > no kick before DRIVER_OK.
> > > > > > > > > > >
> > > > > > > > > > > Jason, kick before DRIVER_OK is out of spec, sure. But it is unrelated
> > > > > > > > > > > to hardening
> > > > > > > > > >
> > > > > > > > > > Yes but with your proposal, it seems to couple kick with DRIVER_OK somehow.
> > > > > > > > >
> > > > > > > > > I don't see how - my proposal ignores DRIVER_OK issues.
> > > > > > > >
> > > > > > > > Yes, what I meant is, in your proposal, the first kick after rest is a
> > > > > > > > hint that the driver is ok (but actually it could not).
> > > > > > > >
> > > > > > > > >
> > > > > > > > > > > and in absence of config interrupts is generally easily
> > > > > > > > > > > fixed just by sticking virtio_device_ready early in initialization.
> > > > > > > > > >
> > > > > > > > > > So if the kick is done before the subsystem registration, there's
> > > > > > > > > > still a window in the middle (assuming we stick virtio_device_ready()
> > > > > > > > > > early):
> > > > > > > > > >
> > > > > > > > > > virtio_device_ready()
> > > > > > > > > > virtqueue_kick()
> > > > > > > > > > /* the window */
> > > > > > > > > > subsystem_registration()
> > > > > > > > >
> > > > > > > > > Absolutely, however, I do not think we really have many such drivers
> > > > > > > > > since this has been known as a wrong thing to do since the beginning.
> > > > > > > > > Want to try to find any?
> > > > > > > >
> > > > > > > > Yes, let me try and update.
> > > > > > >
> > > > > > > This is basically the device that have an RX queue, so I've found the
> > > > > > > following drivers:
> > > > > > >
> > > > > > > scmi, mac80211_hwsim, vsock, bt, balloon.
> > > > > >
> > > > > > Looked and I don't see it yet. Let's consider
> > > > > > ./net/vmw_vsock/virtio_transport.c for example. Assuming we block
> > > > > > callbacks until the first kick, what is the issue with probe exactly?
> > > > >
> > > > > We need to make sure the callback can survive when it runs before sub
> > > > > system registration.
> > > >
> > > > With my proposal no - only if we also kick before registration.
> > > > So I do not see the issue yet.
> > > >
> > > > Consider ./net/vmw_vsock/virtio_transport.c
> > > >
> > > > kicks: virtio_transport_send_pkt_work,
> > > > virtio_vsock_rx_fill, virtio_vsock_event_fill
> > > >
> > > > which of these triggers before we are ready to
> > > > handle callbacks?
> > >
> > > So:
> > >
> > > virtio_vsock_vqs_init()
> > > virtio_device_ready()
> > > virtio_vsock_rx_fill() /* kick there */
> > > rcu_assign_pointer(the_virtio_vsock, vsock)
> > >
> > > It means at least virtio_vsock_rx_done()/virtio_vsock_workqueue needs
> > > to survive. I don't say it has a bug but we do need to audit the code
> > > in this case. The implication is: the virtqueue callback should be
> > > written with no assumption that the driver has registered in the
> > > subsystem. We don't or can't assume all drivers are written in this
> > > way.
> >
> >
> > I thought you said you audited code and found bugs.
> >
> > My claim is that simply because qemu starts processing
> > packets immediately upon kick, if bugs like this
> > existed we would have noticed by now.
>
> This is true for a well behaved hypervisor. But what we want to deal
> with is the buggy/malicious hypervisors.




> >
> > In this case the_virtio_vsock is used for xmit things,
> > callbacks do not seem to use it at all.
>
> So the hypervisor can trigger the notification just after the kick and
> the work function seems to be safe.
>
> One another example for this is in virtcons_probe():
>
> spin_lock_init(&portdev->ports_lock);
> INIT_LIST_HEAD(&portdev->ports);
> INIT_LIST_HEAD(&portdev->list);
>
> virtio_device_ready(portdev->vdev);
>
> INIT_WORK(&portdev->config_work, &config_work_handler);
> INIT_WORK(&portdev->control_work, &control_work_handler);
>
> in control_intr() we had:
>
> static void control_intr(struct virtqueue *vq)
> {
> struct ports_device *portdev;
>
> portdev = vq->vdev->priv;
> schedule_work(&portdev->control_work);
> }
>
> So we might crash if the notification is raised just after
> virtio_device_ready().

Yes! But this is not my proposal. This is yours.
Your patches block interrupts until virtio_device_ready.

My proposal is to block them until kick.

In this case kick is in fill_queue after INIT_WORK.


> This is not an exact example of when a callback is not ready after
> kick, but it demonstrates that the callback could have assumed that
> all setup has been done when it is called.
>
> Thanks

So if there are not examples of callbacks not ready after kick
then let us block callbacks until first kick. That is my idea.


> >
> > > >
> > > >
> > > > > >
> > > > > >
> > > > > > > >
> > > > > > > > >I couldn't ... except maybe bluetooth
> > > > > > > > > but that's just maintainer nacking fixes saying he'll fix it
> > > > > > > > > his way ...
> > > > > > > > >
> > > > > > > > > > And during remove(), we get another window:
> > > > > > > > > >
> > > > > > > > > > subsysrem_unregistration()
> > > > > > > > > > /* the window */
> > > > > > > > > > virtio_device_reset()
> > > > > > > > >
> > > > > > > > > Same here.
> > > > > > >
> > > > > > > Basically for the drivers that set driver_ok before registration,
> > > > > >
> > > > > > I don't see what does driver_ok have to do with it.
> > > > >
> > > > > I meant for those driver, in probe they do()
> > > > >
> > > > > virtio_device_ready()
> > > > > subsystem_register()
> > > > >
> > > > > In remove() they do
> > > > >
> > > > > subsystem_unregister()
> > > > > virtio_device_reset()
> > > > >
> > > > > for symmetry
> > > >
> > > > Let's leave remove alone for now. I am close to 100% sure we have *lots*
> > > > of issues around it, but while probe is unavoidable remove can be
> > > > avoided by blocking hotplug.
> > >
> > > Unbind can trigger this path as well.
> > >
> > > >
> > > >
> > > > > >
> > > > > > > so
> > > > > > > we have a lot:
> > > > > > >
> > > > > > > blk, net, mac80211_hwsim, scsi, vsock, bt, crypto, gpio, gpu, i2c,
> > > > > > > iommu, caif, pmem, input, mem
> > > > > > >
> > > > > > > So I think there's no easy way to harden the notification without
> > > > > > > auditing the driver one by one (especially considering the driver may
> > > > > > > use bh or workqueue). The problem is the notification hardening
> > > > > > > depends on a correct or race-free probe/remove. So we need to fix the
> > > > > > > issues in probe/remove then do the hardening on the notification.
> > > > > > >
> > > > > > > Thanks
> > > > > >
> > > > > > So if drivers kick but are not ready to get callbacks then let's fix
> > > > > > that first of all, these are racy with existing qemu even ignoring
> > > > > > spec compliance.
> > > > >
> > > > > Yes, (the patches I've posted so far exist even with a well-behaved device).
> > > > >
> > > > > Thanks
> > > >
> > > > patches you posted deal with DRIVER_OK spec compliance.
> > > > I do not see patches for kicks before callbacks are ready to run.
> > >
> > > Yes.
> > >
> > > Thanks
> > >
> > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > MST
> > > > > >
> > > >
> >

\
 
 \ /
  Last update: 2022-06-30 10:40    [W:0.808 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site