lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 08/15] riscv: dts: canaan: fix the k210's timer nodes
On Wed, Jun 29, 2022 at 07:43:37PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> The timers on the k210 have non standard interrupt configurations,
> which leads to dtbs_check warnings:
>
> k210_generic.dtb: timer@502d0000: interrupts: [[14], [15]] is too long
> From schema: Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
>
> Split the timer nodes in two, so that the second timer in the IP block
> can actually be accessed & in the process solve the dtbs_check warning.

Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Just to note. IMO the DW APB Timer driver has been incorrectly
designed in the first place. The dts-node is supposed to describe the
whole IP-core timers set as the original Canaan k210 DT-file expected,
since there are common CSRs in the registers range, which currently
get to be unreachable. But since the DT-bindings has already been
defined that way in the framework of DW APB Timer driver alas there
is nothing we can do to fix it.

-Sergey

>
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> arch/riscv/boot/dts/canaan/k210.dtsi | 46 +++++++++++++++++++++++-----
> 1 file changed, 38 insertions(+), 8 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
> index cd4eae82d8b2..72f70128d751 100644
> --- a/arch/riscv/boot/dts/canaan/k210.dtsi
> +++ b/arch/riscv/boot/dts/canaan/k210.dtsi
> @@ -319,28 +319,58 @@ fpioa: pinmux@502b0000 {
>
> timer0: timer@502d0000 {
> compatible = "snps,dw-apb-timer";
> - reg = <0x502D0000 0x100>;
> - interrupts = <14>, <15>;
> + reg = <0x502D0000 0x14>;
> + interrupts = <14>;
> clocks = <&sysclk K210_CLK_TIMER0>,
> <&sysclk K210_CLK_APB0>;
> clock-names = "timer", "pclk";
> resets = <&sysrst K210_RST_TIMER0>;
> };
>
> - timer1: timer@502e0000 {
> + timer1: timer@502d0014 {
> compatible = "snps,dw-apb-timer";
> - reg = <0x502E0000 0x100>;
> - interrupts = <16>, <17>;
> + reg = <0x502D0014 0x14>;
> + interrupts = <15>;
> + clocks = <&sysclk K210_CLK_TIMER0>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "timer", "pclk";
> + resets = <&sysrst K210_RST_TIMER0>;
> + };
> +
> + timer2: timer@502e0000 {
> + compatible = "snps,dw-apb-timer";
> + reg = <0x502E0000 0x14>;
> + interrupts = <16>;
> clocks = <&sysclk K210_CLK_TIMER1>,
> <&sysclk K210_CLK_APB0>;
> clock-names = "timer", "pclk";
> resets = <&sysrst K210_RST_TIMER1>;
> };
>
> - timer2: timer@502f0000 {
> + timer3: timer@502e0014 {
> + compatible = "snps,dw-apb-timer";
> + reg = <0x502E0014 0x114>;
> + interrupts = <17>;
> + clocks = <&sysclk K210_CLK_TIMER1>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "timer", "pclk";
> + resets = <&sysrst K210_RST_TIMER1>;
> + };
> +
> + timer4: timer@502f0000 {
> + compatible = "snps,dw-apb-timer";
> + reg = <0x502F0000 0x14>;
> + interrupts = <18>;
> + clocks = <&sysclk K210_CLK_TIMER2>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "timer", "pclk";
> + resets = <&sysrst K210_RST_TIMER2>;
> + };
> +
> + timer5: timer@502f0014 {
> compatible = "snps,dw-apb-timer";
> - reg = <0x502F0000 0x100>;
> - interrupts = <18>, <19>;
> + reg = <0x502F0014 0x14>;
> + interrupts = <19>;
> clocks = <&sysclk K210_CLK_TIMER2>,
> <&sysclk K210_CLK_APB0>;
> clock-names = "timer", "pclk";
> --
> 2.36.1
>

\
 
 \ /
  Last update: 2022-06-30 23:54    [W:0.359 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site