lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] regulator: dt-bindings: qcom,smd-rpm: Add PM8909
On Fri, Jun 24, 2022 at 11:26:34AM -0600, Rob Herring wrote:
> On Thu, 23 Jun 2022 11:46:13 +0200, Stephan Gerhold wrote:
> > Document the "qcom,rpm-pm8909-regulators" compatible for describing
> > the regulators available in the PM8909 PMIC (controlled via the RPM
> > firmware).
> >
> > PM8909 is very similar to the existing PM8916 but lacks 3 of the
> > regulators (s3, s4 and l16).
> >
> > Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
> > ---
> > .../devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/patch/
>
>
> pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
> arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dtb
> arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dtb
> arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dtb
>

Thanks for the (automated) report, Rob! :)

The failure is unrelated to my patch. It seems to be a simple typo in
the device tree (not a mistake in the DT schema) so I posted a quick fix
in a separate patch:

https://lore.kernel.org/linux-arm-msm/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com/

It should land separately through the Qualcomm tree so no need to wait
for it to be applied. :)

Thanks,
Stephan

\
 
 \ /
  Last update: 2022-06-27 16:09    [W:0.073 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site