lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 02/14] dt-bindings: clk: imx: Add fsl,scu-clk yaml file
From
On 16/06/2022 18:42, Viorel Suman wrote:
> From: Abel Vesa <abel.vesa@nxp.com>
>
> In order to replace the fsl,scu txt file from bindings/arm/freescale,
> we need to split it between the right subsystems. This patch documents
> separately the 'clock' child node of the SCU main node.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
> ---
> .../bindings/clock/fsl,scu-clk.yaml | 58 +++++++++++++++++++
> 1 file changed, 58 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
> new file mode 100644
> index 000000000000..8b59758eee4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
> +
> +maintainers:
> + - Abel Vesa <abel.vesa@nxp.com>
> +
> +description: i.MX SCU Client Device Node
> + Client nodes are maintained as children of the relevant IMX-SCU device node.
> + This binding uses the common clock binding.
> + (Documentation/devicetree/bindings/clock/clock-bindings.txt)
> + The clock consumer should specify the desired clock by having the clock
> + ID in its "clocks" phandle cell.
> + See the full list of clock IDs from
> + include/dt-bindings/clock/imx8qxp-clock.h
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - fsl,imx8dxl-clk
> + - fsl,imx8qm-clk
> + - fsl,imx8qxp-clk
> + - const: fsl,scu-clk
> +
> + '#clock-cells':
> + const: 2
> +
> + clocks:
> + items:
> + - description: XTAL 32KHz
> + - description: XTAL 24MHz
> + minItems: 1
> +
> + clock-names:
> + items:
> + enum:
> + - xtal_32KHz
> + - xtal_24Mhz

No, this does not match your clocks property and allow any combination.
Are you sure that hardware can have entirely different clocks connected?

> + minItems: 1
> + maxItems: 2
> +
> +required:
> + - compatible
> + - '#clock-cells'

Why the clocks are not required?

> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + clock-controller {
> + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";

Wrong indentation. 4 spaces for DTS example.

> + #clock-cells = <2>;
> + };


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-24 12:05    [W:0.188 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site