lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: qcom: sc8280xp: add parent to gcc_ufs_phy_axi_clk for sa8540p
On Thu, Jun 23, 2022 at 10:28:37AM -0400, Brian Masney wrote:
> The sa8540p automotive board has the same SOC as the sc8280xp. In order
> to get the first UFS controller working on the sa8540p,
> GCC_UFS_REF_CLKREF_CLK needs to be setup as a parent to
> GCC_UFS_PHY_AXI_CLK.
>
> This clock name came from the DTS for the downstream MSM 5.4 kernel
> sources for the sa8540p. It also references GCC_UFS_CARD_CLKREF_CLK,
> however that wasn't needed to get the first UFS controller working.
>

I'm not knowledgable enough on the clock subsystem or have access to
documentation to comment on correctness outside of the 5.4 MSM kernel
you mentioned, but I think this probably deserves a Fixes: tag?

I can at least also comment that without this change the sa8540p doesn't
boot on the QDrive3 boards we have.

Thanks,
Andrew

> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
> I originally added this under GCC_UFS_PHY_PHY_AUX_CLK since that's
> what's in the downstream DTS. I was getting errors about
> GCC_UFS_PHY_AXI_CLK being stuck at off so I moved it there.
>
> Also I don't have access to any documentation for this board so I'm
> hoping that someone with docs access can verify that this is the
> appropriate place to put this.
>
> drivers/clk/qcom/gcc-sc8280xp.c | 27 ++++++++++++++-------------
> 1 file changed, 14 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> index 4b894442fdf5..4639b50da418 100644
> --- a/drivers/clk/qcom/gcc-sc8280xp.c
> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> @@ -5685,6 +5685,19 @@ static struct clk_branch gcc_ufs_phy_ahb_clk = {
> },
> };
>
> +static struct clk_branch gcc_ufs_ref_clkref_clk = {
> + .halt_reg = 0x8c058,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x8c058,
> + .enable_mask = BIT(0),
> + .hw.init = &(const struct clk_init_data) {
> + .name = "gcc_ufs_ref_clkref_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_ufs_phy_axi_clk = {
> .halt_reg = 0x77010,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -5696,6 +5709,7 @@ static struct clk_branch gcc_ufs_phy_axi_clk = {
> .hw.init = &(const struct clk_init_data) {
> .name = "gcc_ufs_phy_axi_clk",
> .parent_hws = (const struct clk_hw*[]){
> + &gcc_ufs_ref_clkref_clk.clkr.hw,
> &gcc_ufs_phy_axi_clk_src.clkr.hw,
> },
> .num_parents = 1,
> @@ -5899,19 +5913,6 @@ static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = {
> },
> };
>
> -static struct clk_branch gcc_ufs_ref_clkref_clk = {
> - .halt_reg = 0x8c058,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0x8c058,
> - .enable_mask = BIT(0),
> - .hw.init = &(const struct clk_init_data) {
> - .name = "gcc_ufs_ref_clkref_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
> static struct clk_branch gcc_usb2_hs0_clkref_clk = {
> .halt_reg = 0x8c044,
> .halt_check = BRANCH_HALT,
> --
> 2.36.1
>

\
 
 \ /
  Last update: 2022-06-23 17:34    [W:0.082 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site