lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] net: dp83822: disable rx error interrupt
Date
Some RX errors, notably when disconnecting the cable, increase the RCSR
register. Once half full (0x7fff), an interrupt flood is generated. I
measured ~3k/s interrupts even after the RX errors transfer was
stopped.

Since we don't read and clear the RCSR register, we should disable this
interrupt.

Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
---
drivers/net/phy/dp83822.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 95ef507053a6..8549e0e356c9 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -229,8 +229,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
if (misr_status < 0)
return misr_status;

- misr_status |= (DP83822_RX_ERR_HF_INT_EN |
- DP83822_LINK_STAT_INT_EN |
+ misr_status |= (DP83822_LINK_STAT_INT_EN |
DP83822_ENERGY_DET_INT_EN |
DP83822_LINK_QUAL_INT_EN);

--
2.25.1
\
 
 \ /
  Last update: 2022-06-23 10:53    [W:0.125 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site