lkml.org 
[lkml]   [2022]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] dt_bindings: rs485: Correct delay values
Date
From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

The maximum allowed delay for RTS before and RTS after send is 100 ms.
Adjust the documentation accordingly.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
Documentation/devicetree/bindings/serial/rs485.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index f2c9c9fe6aa7..90a1bab40f05 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -22,12 +22,12 @@ properties:
- description: Delay between rts signal and beginning of data sent in
milliseconds. It corresponds to the delay before sending data.
default: 0
- maximum: 1000
+ maximum: 100
- description: Delay between end of data sent and rts signal in milliseconds.
It corresponds to the delay after sending data and actual release
of the line.
default: 0
- maximum: 1000
+ maximum: 100

rs485-rts-active-low:
description: drive RTS low when sending (default is high).
--
2.36.1
\
 
 \ /
  Last update: 2022-06-22 17:49    [W:0.251 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site